From: Christian Tramnitz <chris.ace@gmx.net>
To: xen-devel@lists.xensource.com
Subject: Re: graphics passthrough with VT-d
Date: Fri, 04 Sep 2009 12:25:46 +0200 [thread overview]
Message-ID: <h7qq04$9r6$1@ger.gmane.org> (raw)
In-Reply-To: <h7p61a$od6$1@ger.gmane.org>
It seems this was unrelated to the gfx_passthrough, I started with
"fresh" domU configs and also reinstalled them and now its working WITH
gfx_passthrough and USB (the whole controller as pci device) passthrough.
I do have (all as pass-through):
- accelerated video (even survives hardware detection during Win7
installation)
- audio (onboard HDA, using digital output)
- USB (UHCI only, EHCI crashed Windows during HW detection)
running Windows 7 x64 (b7600).
I'll now try to swap the primary and secondary gfx (both ATI) to get
some real 3D horse-power.
Best regards,
Christian
Christian Tramnitz wrote:
> Yes without gfx_passthrough it was working (even the same domU with just
> USB devices passed through).
> I think it might be related to the modifications to the memory addresses
> you mentioned in another post.
> I'll verify that, recompile and retest.
next prev parent reply other threads:[~2009-09-04 10:25 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-28 15:34 [PATCH 2/2] graphics passthrough with VT-d Teo En Ming (Zhang Enming)
2009-08-28 15:55 ` Mr. Teo En Ming (Zhang Enming)
2009-08-28 16:08 ` Mr. Teo En Ming (Zhang Enming)
2009-08-28 16:10 ` [PATCH(es)] " Tim Moore
2009-08-28 16:19 ` Alan Cox
2009-08-28 16:22 ` Tim Moore
2009-08-28 16:28 ` Mr. Teo En Ming (Zhang Enming)
2009-08-28 16:31 ` Mr. Teo En Ming (Zhang Enming)
2009-08-28 16:36 ` Alan Cox
2009-08-28 16:39 ` Mr. Teo En Ming (Zhang Enming)
2009-08-28 16:59 ` [PATCH 2/2] " Mr. Teo En Ming (Zhang Enming)
2009-08-28 20:13 ` Mr. Teo En Ming (Zhang Enming)
2009-08-28 22:42 ` Tim Moore
2009-08-29 2:17 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 3:48 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 6:58 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 11:03 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 12:25 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 13:20 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 13:29 ` Tim Moore
2009-08-29 14:12 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 14:48 ` Mr. Teo En Ming (Zhang Enming)
2009-08-31 8:47 ` Han, Weidong
2009-08-31 14:54 ` Mr. Teo En Ming (Zhang Enming)
2009-08-31 16:48 ` Christian Tramnitz
2009-08-31 17:03 ` djmagee
2009-08-31 17:18 ` Keir Fraser
2009-08-31 17:22 ` Mr. Teo En Ming (Zhang Enming)
2009-08-31 21:14 ` Christian Tramnitz
2009-09-01 8:08 ` Han, Weidong
2009-09-01 8:29 ` Christian Tramnitz
2009-09-01 8:59 ` Han, Weidong
2009-09-02 8:38 ` Christian Tramnitz
2009-09-02 8:48 ` Teo En Ming (Zhang Enming)
2009-09-02 8:57 ` Han, Weidong
2009-09-03 19:38 ` Christian Tramnitz
2009-09-04 10:25 ` Christian Tramnitz [this message]
2009-08-31 19:35 ` Tim Moore
2009-09-01 1:07 ` Han, Weidong
2009-09-01 7:12 ` Han, Weidong
2009-08-29 13:46 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 14:39 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 15:06 ` Mr. Teo En Ming (Zhang Enming)
2009-08-29 10:41 ` Failure when "make tools" via xen-3.4.1 tarball on Ubuntu 9.10 Server ALPHA 4 Boris Derzhavets
2009-08-29 11:05 ` Boris Derzhavets
2009-08-29 15:17 ` Failure to setup Xen 3.4.1 Dom0 on top of Ubuntu 9.10 Server HVM DomU ( 2.6.30.2 xenified kernel) Boris Derzhavets
2009-08-30 9:32 ` Boris Derzhavets
2009-08-30 12:44 ` Keir Fraser
2009-08-30 13:19 ` Boris Derzhavets
2009-08-30 17:55 ` Ian Pratt
2009-08-30 18:17 ` Tim Moore
2009-08-30 18:32 ` Keir Fraser
2009-08-30 13:26 ` Christian Tramnitz
2009-08-30 15:17 ` Boris Derzhavets
2009-08-30 15:53 ` Boris Derzhavets
2009-08-30 15:50 ` Keir Fraser
2009-08-30 16:22 ` Boris Derzhavets
2009-08-30 16:41 ` Keir Fraser
2009-08-30 16:55 ` Keir Fraser
2009-08-30 17:10 ` Boris Derzhavets
2009-08-30 17:49 ` Keir Fraser
2009-08-30 18:14 ` Failure to start Xen >3.4.1 and xen-3.5-unstable Dom0 using GRUB2 Tim Moore
2009-08-30 18:19 ` Re: Failure to setup Xen 3.4.1 Dom0 on top of Ubuntu 9.10 Server HVM DomU ( 2.6.30.2 xenified kernel) Boris Derzhavets
2009-08-31 7:17 ` Boris Derzhavets
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='h7qq04$9r6$1@ger.gmane.org' \
--to=chris.ace@gmx.net \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.