From: Christian Tramnitz <chris.ace@gmx.net>
To: xen-devel@lists.xensource.com
Subject: Re: VT-D On An Asus P5E-VM DO Motherboard Not Working, Xen 3.4.1
Date: Mon, 28 Sep 2009 12:38:19 +0200 [thread overview]
Message-ID: <h9q3nb$58j$1@ger.gmane.org> (raw)
In-Reply-To: <715D42877B251141A38726ABF5CABF2C05507CF699@pdsmsx503.ccr.corp.intel.com>
[-- Attachment #1: Type: text/plain, Size: 929 bytes --]
Han, Weidong wrote:
> Yes, the other people should not succeed on the same motherboard with the same BIOS, unless they used an old xen version without this check. USB controllers and integrated graphics card will use RMRR. I suspect it can work with this broken BIOS even you remove the check and don't disable VT-d.
>
> Regards,
> Weidong
I'm the one with working VT-d on this board (using the same BIOS version
than Michael). I was using an older 3.4.0-pre but now switched to the
latest 3.5-unstable and its still working. I haven't tried to actually
pass-through a device for some time but it was already working in the past.
Attached my xm dmesg.
I also agree with Sander's comment in this thread, that we should mark
"unwilling" vendors in the VT-d section of the Wiki. I'll add notes to
all Asus boards (basically this one and the P6T Deluxe that I also own
and had problems with).
Best regards,
Christian
[-- Attachment #2: xm.dmesg --]
[-- Type: text/plain, Size: 16397 bytes --]
__ __ _____ ____ _ _ _
\ \/ /___ _ __ |___ / | ___| _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ \047_ \ |_ \ |___ \ __| | | | \047_ \/ __| __/ _` | \047_ \| |/ _ \
/ \ __/ | | | ___) | ___) |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_)____/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.5-unstable (root@epp.trasec.de) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) Sat Sep 12 11:57:50 CEST 2009
(XEN) Latest ChangeSet: Tue Sep 22 14:19:38 2009 +0100 20247:8b1567102cf3
(XEN) Command line: iommu=1 iommu_inclusive_mapping=1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cf550000 (usable)
(XEN) 00000000cf550000 - 00000000cf55e000 (ACPI data)
(XEN) 00000000cf55e000 - 00000000cf5e0000 (ACPI NVS)
(XEN) 00000000cf5e0000 - 00000000cf600000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffc00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000022c000000 (usable)
(XEN) ACPI: RSDP 000F9A80, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT CF550100, 0064 (r1 A_M_I_ OEMXSDT 3000831 MSFT 97)
(XEN) ACPI: FACP CF550290, 00F4 (r3 A_M_I_ OEMFACP 3000831 MSFT 97)
(XEN) ACPI: DSDT CF5505C0, 843B (r1 A0869 A0869001 1 INTL 20060113)
(XEN) ACPI: FACS CF55E000, 0040
(XEN) ACPI: APIC CF550390, 006C (r1 A_M_I_ OEMAPIC 3000831 MSFT 97)
(XEN) ACPI: MCFG CF550400, 003C (r1 A_M_I_ OEMMCFG 3000831 MSFT 97)
(XEN) ACPI: OEMB CF55E040, 0081 (r1 A_M_I_ AMI_OEM 3000831 MSFT 97)
(XEN) ACPI: HPET CF558A00, 0038 (r1 A_M_I_ OEMHPET 3000831 MSFT 97)
(XEN) ACPI: GSCI CF55E0D0, 2024 (r1 A_M_I_ GMCHSCI 3000831 MSFT 97)
(XEN) ACPI: iEIT CF560100, 00B0 (r1 A_M_I_ EITTABLE 3000831 MSFT 97)
(XEN) ACPI: DMAR CF5601B0, 0140 (r1 AMI OEMDMAR 1 MSFT 97)
(XEN) System RAM: 8105MB (8299984kB)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000022c000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cf55e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000
(XEN) [VT-D]dmar.c:537: Host address width 36
(XEN) [VT-D]dmar.c:546: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:373: dmaru->address = fed91000
(XEN) [VT-D]dmar.c:325: endpoint: 0:2.0
(XEN) [VT-D]dmar.c:546: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:373: dmaru->address = fed92000
(XEN) [VT-D]dmar.c:325: endpoint: 0:3.0
(XEN) [VT-D]dmar.c:546: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:373: dmaru->address = fed93000
(XEN) [VT-D]dmar.c:385: found INCLUDE_ALL
(XEN) [VT-D]dmar.c:550: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:550: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:428: RMRR address range not in reserved memory base = cf600000 end = cfffffff; iommu_inclusive_mapping=1 parameter may be needed.
(XEN) [VT-D]dmar.c:325: endpoint: 0:2.0
(XEN) [VT-D]dmar.c:550: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:325: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:325: endpoint: 0:1a.7
(XEN) Intel VT-d DMAR tables have been parsed.
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 3000.062 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: VMX enabled
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU0 has no CMCI support
(XEN) [VT-D]iommu.c:943: drhd->address = fed92000
(XEN) [VT-D]iommu.c:944: iommu->reg = ffff82c3fff57000
(XEN) [VT-D]iommu.c:943: drhd->address = fed91000
(XEN) [VT-D]iommu.c:944: iommu->reg = ffff82c3fff56000
(XEN) [VT-D]iommu.c:943: drhd->address = fed93000
(XEN) [VT-D]iommu.c:944: iommu->reg = ffff82c3fff55000
(XEN) Intel VT-d Snoop Control not supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation not supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) CPU0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) HPET: 4 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:0.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:2.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:3.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:19.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.1
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.2
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.7
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1f.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1f.3
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1f.6
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 1:1.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 1:1.1
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 1:1.2
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 1:1.3
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 1:1.4
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 1:1.5
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 1:1.6
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 1:1.7
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.1
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.2
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.7
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:2.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.0
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.1
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.2
(XEN) [VT-D]iommu.c:1182:d32767 domain_context_mapping:PCI: bdf = 0:1a.7
(XEN) [VT-D]iommu.c:632: iommu_enable_translation: iommu->reg = ffff82c3fff57000
(XEN) [VT-D]iommu.c:632: iommu_enable_translation: iommu->reg = ffff82c3fff56000
(XEN) [VT-D]iommu.c:716: iommu_page_fault: iommu->reg = ffff82c3fff56000
(XEN) [VT-D]iommu.c:685: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:688: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:670: iommu_fault:DMA Write: 0:2.0 addr 400000000 REASON 5 iommu->reg = ffff82c3fff56000
(XEN) print_vtd_entries: iommu = ffff8302263f30d0 bdf = 0:2:0 gmfn = 400000
(XEN) root_entry = ffff8302263f0000
(XEN) root_entry[0] = 225255001
(XEN) context = ffff830225255000
(XEN) context[10] = 101_2263c0001
(XEN) l3 = ffff8302263c0000
(XEN) l3_index = 10
(XEN) l3[10] = 0
(XEN) l3[10] not present
(XEN) [VT-D]iommu.c:632: iommu_enable_translation: iommu->reg = ffff82c3fff55000
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x200000 memsz=0x403000
(XEN) elf_parse_binary: phdr: paddr=0x603000 memsz=0x6ca40
(XEN) elf_parse_binary: phdr: paddr=0x670000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x672000 memsz=0x1b92d4
(XEN) elf_parse_binary: memory: 0x200000 -> 0x82b2d4
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80207000
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: INIT_P2M = 0xffffe20000000000
(XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff80200000
(XEN) virt_kend = 0xffffffff8082b2d4
(XEN) virt_entry = 0xffffffff80200000
(XEN) p2m_base = 0xffffe20000000000
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0x200000 -> 0x82b2d4
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000224000000->0000000225000000 (2012285 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff8082b2d4
(XEN) Init. ramdisk: ffffffff8082c000->ffffffff8082c000
(XEN) Phys-Mach map: ffffe20000000000->ffffe20000f623e8
(XEN) Start info: ffffffff8082c000->ffffffff8082c4b4
(XEN) Page tables: ffffffff8082d000->ffffffff80836000
(XEN) Boot stack: ffffffff80836000->ffffffff80837000
(XEN) TOTAL: ffffffff80000000->ffffffff80c00000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff80603000
(XEN) elf_load_binary: phdr 1 at 0xffffffff80603000 -> 0xffffffff8066fa40
(XEN) elf_load_binary: phdr 2 at 0xffffffff80670000 -> 0xffffffff80670888
(XEN) elf_load_binary: phdr 3 at 0xffffffff80672000 -> 0xffffffff806baa20
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch input to Xen)
(XEN) Freed 152kB init memory.
(XEN) io_apic.c:2208:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=00000900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 00:1f.6
(XEN) PCI add device 01:01.0
(XEN) Set CPU acpi_id(1) cpuid(0) Px State info:
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=64, bit_offset=0, reserved=0, address=409
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=16, bit_offset=0, reserved=0, address=408
(XEN) _PSS: state_count=2
(XEN) State0: 2997MHz 88000mW 10us 10us 0x928 0x928
(XEN) State1: 1998MHz 52800mW 10us 10us 0x618 0x618
(XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=2
(XEN) _PPC: 0
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) CPU 0 initialization completed
(XEN) Set CPU acpi_id(2) cpuid(1) Px State info:
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=64, bit_offset=0, reserved=0, address=409
(XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=16, bit_offset=0, reserved=0, address=408
(XEN) _PSS: state_count=2
(XEN) State0: 2997MHz 88000mW 10us 10us 0x928 0x928
(XEN) State1: 1998MHz 52800mW 10us 10us 0x618 0x618
(XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=2
(XEN) _PPC: 0
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) CPU 1 initialization completed
(XEN) no cpu_id for acpi_id 3
(XEN) no cpu_id for acpi_id 4
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:19.0
(XEN) allocated vector for irq:20
(XEN) allocated vector for irq:17
(XEN) PCI add device 00:1f.2
(XEN) allocated vector for irq:22
(XEN) PCI add device 00:1a.7
(XEN) allocated vector for irq:18
(XEN) PCI add device 00:1d.7
(XEN) allocated vector for irq:23
(XEN) PCI add device 00:1a.0
(XEN) allocated vector for irq:16
(XEN) PCI add device 00:1a.1
(XEN) allocated vector for irq:21
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) allocated vector for irq:19
(XEN) PCI add device 00:1d.2
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2009-09-28 10:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-26 20:17 VT-D On An Asus P5E-VM DO Motherboard Not Working, Xen 3.4.1 Michael MacLeod
2009-09-27 7:14 ` Han, Weidong
2009-09-27 7:34 ` Michael MacLeod
2009-09-27 7:45 ` Han, Weidong
2009-09-27 15:35 ` Michael MacLeod
2009-09-27 17:30 ` Keir Fraser
2009-09-28 0:47 ` Han, Weidong
2009-09-28 10:38 ` Christian Tramnitz [this message]
2009-09-28 12:54 ` Keir Fraser
2009-09-28 13:04 ` Tim Moore
2009-09-28 13:09 ` Christian Tramnitz
2009-09-28 13:47 ` Christian Tramnitz
2009-09-29 1:35 ` Michael MacLeod
2009-09-30 11:12 ` Christian Tramnitz
2009-10-01 0:01 ` Michael MacLeod
2009-09-28 13:08 ` Han, Weidong
2009-09-27 7:39 ` Sander Eikelenboom
2009-09-27 15:33 ` Michael MacLeod
2009-09-28 2:33 ` Cui, Dexuan
2009-09-28 9:56 ` Sander Eikelenboom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='h9q3nb$58j$1@ger.gmane.org' \
--to=chris.ace@gmx.net \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.