Re: wrong decibel data?

[Colin Guthrie <gmane@colin.guthr.ie>]

'Twas brillig, and Nicolo' Chieffo at 02/04/10 21:25 did gyre and gimble:
> I just had a discussion with pulseaudio developers in which they told
> me that if the speakers don't emit any audio when the ALSA volume is
> 0%, then the correct gain value should be -inf dB (a value lower than
> -200 for pulseaudio means mute). Unfortunately my card has -48 dB.
> 
> They also said that if with -47.25 dB (which is what I get with ALSA
> volume set to 2%) I can hear audio even if it's very very low, at -48
> dB I should still be able to hear something (the scale is
> logarithmic).
> 
> Their request is to change to -200 the gain reported from my card
> driver when the ALSA volume is set to 0%.
> Thanks

FWIW, I've got the same/similar h/w with a cutoff at 14% in PA as you
have. I've been meaning to get this fixed for a while, but I'm
incredibly lazy with certain things that don't bother me practically, so
haven't followed it up yet.

Thanks for getting the ball rolling :)

If any specific debug is needed here, feel free to ask.

Col

-- 

Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/

Day Job:
  Tribalogic Limited [http://www.tribalogic.net/]
Open Source:
  Mandriva Linux Contributor [http://www.mandriva.com/]
  PulseAudio Hacker [http://www.pulseaudio.org/]
  Trac Hacker [http://trac.edgewall.org/]