From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robert Kaiser Date: Fri, 11 Mar 2011 17:09:22 +0000 Subject: Re: [lm-sensors] RFC: nct6776f support in the w83627ehf and fan Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Ian Dobson schrieb: > Any chance you can have a look in the BIOS and email the exact values > you see there. Right at initial boot of the day I had this there (thought I'd give you=20 all values and not just voltages, in case other settings warrant a=20 comparison as well): CPU Fan 1028 RPM Front Fan 0 RPM Rear Fan 0 RPM Processor Temperature 61=B0C PCH Temperature 43=B0C Memory Temperature 24=B0C VR Temperature 31=B0C +12.0V 12.23 V +5.0V 5.03 V +3.3V 3.32 V Memory Vcc 1.57 V Processor Vcc 1.20 V PCH Vcc 1.08 V +3.3 Standby 3.42 V Now, a few hours later (sorry, didn't get to it right away), sensors=20 gives me the following: nct6775-isa-0290 Adapter: ISA adapter Vcore: +1.16 V (min =3D +0.00 V, max =3D +1.74 V) in1: +1.11 V (min =3D +0.00 V, max =3D +0.00 V) ALARM AVCC: +3.31 V (min =3D +2.98 V, max =3D +3.63 V) +3.3V: +3.31 V (min =3D +2.98 V, max =3D +3.63 V) in4: +1.02 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in5: +1.05 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in6: +1.08 V (min =3D +0.00 V, max =3D +0.00 V) ALARM 3VSB: +3.41 V (min =3D +2.98 V, max =3D +3.63 V) Vbat: +3.38 V (min =3D +2.70 V, max =3D +3.30 V) ALARM fan1: 0 RPM (min =3D 0 RPM, div =3D 128) fan2: 1081 RPM (min =3D 0 RPM, div =3D 32) ALARM fan3: 0 RPM (min =3D 0 RPM, div =3D 128) fan4: 0 RPM (div =3D 128) SYSTIN: +40.0=B0C (high =3D +0.0=B0C, hyst =3D +0.0=B0C) ALARM = sensor=20 =3D diode CPUTIN: +39.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor = =3D diode PECI Agent 0: +55.5=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) sensor = =3D diode PCH_CHIP_TEMP: +66.0=B0C PECI Agent 1: +0.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) cpu0_vid: +2.050 V (Just for future reference in case anyone else looks up this message=20 independent of the thread, this is an Intel DH67CL board.) Robert Kaiser _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors