Re: model needed for Clevo P150HM (Realtek ALC892)

[Julian Sikorski <belegdol@gmail.com>]

W dniu 05.07.2011 03:31, Raymond Yau pisze:
> 2011/7/5 Julian Sikorski <belegdol@gmail.com>:
> 
>> From what I was able to decipher, 0x1e is a jack, external rear, with
>> spdif out default output and optical connection. It is black. The same
>> physical socket is used for the last 2 surround channels. Could you
>> please clarify? Thanks in advance.
> 
> Take a look at Block Diagram of alc892 datasheet
> 
> http://www.realtek.com/products/productsView.aspx?Langid=1&PNid=24&PFid=28&Level=5&Conn=4&ProdID=284
> 
> if you can confirmed the internal mic, mic jack ,line in , line out
> and internal speaker work as expected
> 
> the only pin complex which can be connected to rear [Audio Output] 0x0d is 0x15
> 
> seem that the pin complex for 4 jack 8-ch notebook are different from
> desktop with 6 jacks at rear panel
> 
> a 10 channel codec is able to provide volume control for internal
> speaker and 4 jacks
I have tested int speakers, int mic, ext mic, line in, hp jack,
lfe/center and rear surround. All seem to work. The only thing untested
is the optical out.

Julian