From mboxrd@z Thu Jan 1 00:00:00 1970 From: Julian Sikorski Subject: Re: Clevo P170HM / Sager NP8170 audio Date: Sat, 19 Nov 2011 10:11:36 +0100 Message-ID: References: <4EB8C132.7020906@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable Return-path: Received: from lo.gmane.org (lo.gmane.org [80.91.229.12]) by alsa0.perex.cz (Postfix) with ESMTP id F07BE103B70 for ; Sat, 19 Nov 2011 10:11:53 +0100 (CET) Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1RRgxj-00012i-OV for alsa-devel@alsa-project.org; Sat, 19 Nov 2011 10:11:51 +0100 Received: from 178-83-206-236.dynamic.hispeed.ch ([178.83.206.236]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 19 Nov 2011 10:11:51 +0100 Received: from belegdol by 178-83-206-236.dynamic.hispeed.ch with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 19 Nov 2011 10:11:51 +0100 In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org W dniu 19.11.2011 03:31, Raymond Yau pisze: > 2011/11/17 Julian Sikorski : > = >>>> >>>> the four jacks need alc883_4st_8ch mixer of "targa-8ch-dig" which has >>>> been removed >>>> >>>> http://git.alsa-project.org/?p=3Dalsa-kernel.git;a=3Dcommitdiff;h=3D7a= 689ebcefe5feba626816929fd75046e455a96f;hp=3D34913cda7af335d748a424d91984576= b8c9d9cae >>>> >>>> The main problem is the signal of "rear" speaker of the notebook is >>>> not really at the rear of the user. >>> I cannot speak for P170HM as I do not have one, but on P150HM there are >>> two speakers between the screen and the keyboard and something supposed >>> to act as a subwoofer on the bottom side of the laptop. On Windows 7 you >>> need THX TruStudio PRO to make it work. No center speaker that I know o= f. >>> There are service manuals with schematics for these laptops floating >>> around the internet. ALC892 connections are described on page 86 for >>> P150HM and page 91 for P170HM. You should be able to understand far more >>> than I. >>> >>> Regards, >>> Julian >>> >> From the official (non-service) manual, page 309: >> >> Audio >> High Definition Audio >> 3D Enhanced Sound System >> S/PDIF Digital Output >> Built-In Microphone >> THX TruStudio Pro >> 7.1CH Audio output supported by >> headphone, microphone, S/PDIF & Line- >> In Jack >> Models A & B: >> 2 Built-In Speakers and One Sub Woofer >> Model C: >> 5 Built-In Speakers and One Sub Woofer >> >> Model A is P150HM, and model C is P170HM. >> > = > Refer to P170HM 's photo in user manual > = > There are 3 speakers and a subwoofer at the bottom of the laptop and > two speakers at the top > = > Refer to user manual of P150HM, > = > Plug the front speaker cables into the Headphone-Out Jack. > = > =95 Line-In Jack =3D Rear Speaker Out > =95 Microphone-In Jack =3D Center/Subwoofer Speaker Out > =95 S/PDIF-Out Jack =3D Side Speaker Out (for 7.1 Surround Sound Only) > = > 7. As you plug in each cable a dialog box will pop up (see =93Auto Popup > Dialog=94 on > page 2 - 9). > = > Auto Popup Dialog mean support jack detect > = > you can try David's hda-jack-sense-test.py > = > http://thread.gmane.org/gmane.linux.alsa.devel/85051 Yes, it is working: [julas@snowball2 ~]$ sudo python hda-jack-sense-test.py Pin 0x18 (Black Mic): present =3D No Pin 0x1a (Black Line In): present =3D No Pin 0x1b (Black HP Out): present =3D Yes [julas@snowball2 ~]$ sudo python hda-jack-sense-test.py Pin 0x18 (Black Mic): present =3D No Pin 0x1a (Black Line In): present =3D No Pin 0x1b (Black HP Out): present =3D No [julas@snowball2 ~]$ sudo python hda-jack-sense-test.py Pin 0x18 (Black Mic): present =3D No Pin 0x1a (Black Line In): present =3D Yes Pin 0x1b (Black HP Out): present =3D No [julas@snowball2 ~]$ sudo python hda-jack-sense-test.py Pin 0x18 (Black Mic): present =3D Yes Pin 0x1a (Black Line In): present =3D No Pin 0x1b (Black HP Out): present =3D No > = > = > Is Node 0x17 also the side jack of your p150hm ? > pin cap support Detect and Trigger but Misc =3D NO_PRESENCE Yes, it is between mic and line in jacks, third one from the front. The only difference is that there is red light coming out of it. > = > which node is your subwoofer ? This I have not figured out yet unfortunately. Keep in mind that in windows you need THX TruStudio PRO to get it working, and the config is advertised as stereo. There was a discussion about this on notebookreview forums [1], so maybe it configured in some weird way? [1] http://forum.notebookreview.com/sager-clevo/577492-subwoofer-p150hm-not-wor= king.html > = > Refer to your P150HM alsa-info > = > http://thread.gmane.org/gmane.linux.alsa.devel/86475/focus=3D86601 > = > = > Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out > Amp-Out caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 > Amp-Out vals: [0x80 0x80] > Pincap 0x00000036: IN OUT Detect Trigger > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > Conn =3D 1/8, Color =3D Black > DefAssociation =3D 0xf, Sequence =3D 0x0 > Misc =3D NO_PRESENCE > Pin-ctls: 0x20: IN > Unsolicited: tag=3D00, enabled=3D0 > Power states: D0 D1 D2 D3 EPSS > Power: setting=3DD0, actual=3DD0 > Connection: 1 > 0x0f > = > = > = > autoconfig: line_outs=3D1 (0x14/0x0/0x0/0x0/0x0) type:speaker > speaker_outs=3D0 (0x0/0x0/0x0/0x0/0x0) > hp_outs=3D1 (0x1b/0x0/0x0/0x0/0x0) > mono: mono_out=3D0x0 > dig-out=3D0x1e/0x0 > inputs: Mic=3D0x18 Internal Mic=3D0x19 Line=3D0x1a > = > CTRL: add: Channel Mode:0 > CTRL: add: Headphone Playback Volume:0 > CTRL: add: Headphone Playback Switch:0 > CTRL: add: Surround Playback Volume:0 > CTRL: add: Surround Playback Switch:0 > CTRL: add: Center Playback Volume:0 > CTRL: add: LFE Playback Volume:0 > CTRL: add: Center Playback Switch:0 > CTRL: add: LFE Playback Switch:0 > CTRL: add: Speaker Playback Volume:0 > CTRL: add: Speaker Playback Switch:0 >> jack > NID 0x14: cfg 0x99130110: [Fixed] Speaker at Int ATAPI > NID 0x18: cfg 0x01a11c30: [Jack] Mic at Ext Rear > NID 0x19: cfg 0x99a30931: [Fixed] Mic at Int ATAPI > NID 0x1a: cfg 0x0181143f: [Jack] Line In at Ext Rear > NID 0x1b: cfg 0x0121101f: [Jack] HP Out at Ext Rear > NID 0x1e: cfg 0x01451120: [Jack] SPDIF Out at Ext Rear >> get 1 > 1 Channel Mode:0 > ITEM: 0:2ch, 1:4ch, 2:6ch, VAL: [2ch] > = > = > = > Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out > Amp-In caps: ofs=3D0x00, nsteps=3D0x03, stepsize=3D0x27, mute=3D0 > Amp-In vals: [0x00 0x00] > Amp-Out caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 > Amp-Out vals: [0x00 0x00] > Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger > Vref caps: HIZ 50 GRD 80 100 > EAPD 0x2: EAPD > Pin Default 0x0121101f: [Jack] HP Out at Ext Rear > Conn =3D 1/8, Color =3D Black > DefAssociation =3D 0x1, Sequence =3D 0xf > Pin-ctls: 0xc0: OUT HP VREF_HIZ > Unsolicited: tag=3D04, enabled=3D1 > Power states: D0 D1 D2 D3 EPSS > Power: setting=3DD0, actual=3DD0 > Connection: 5 > 0x0c* 0x0d 0x0e 0x0f 0x26