All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bandan Das <bsd@redhat.com>
To: "Christian König" <christian.koenig@amd.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH] x86/pci: Add a break condition when enabling BAR
Date: Thu, 07 Dec 2017 14:41:03 -0500	[thread overview]
Message-ID: <jpgtvx2como.fsf@linux.bootlegged.copy> (raw)
In-Reply-To: <8ce90b86-a2ec-c158-8f6d-e939c97aa065@amd.com> ("Christian \=\?utf-8\?Q\?K\=C3\=B6nig\=22's\?\= message of "Thu, 7 Dec 2017 14:13:44 +0100")

Christian König <christian.koenig@amd.com> writes:

> Hi Bandas,
>
> thanks for the patch, but this is a known issue with a fix already on
> the way into the next -rc.

Oh great! Thank you, have a pointer to the patch so that I can test ?

> Regards,
> Christian.
>
> Am 07.12.2017 um 09:00 schrieb Bandan Das:
>> On an old flaky system with AMD Opteron 6320, boot hangs
>> with the following trace since commit fa564ad9:
>>
>> [   28.181012] Hardware name: HP ProLiant DL385p Gen8, BIOS A28 09/03/2014
>> [   28.184022] RIP: 0010:lock_acquire+0xd5/0x1e0
>> [   28.185010] RSP: 0018:ffffb7ad818c39a8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff11
>> [   28.187010] RAX: ffffa074fb39b140 RBX: 0000000000000246 RCX: 0000000000000000
>> [   28.189014] RDX: ffffffffb20a55a9 RSI: 0000000000040009 RDI: 0000000000000246
>> [   28.191012] RBP: 0000000000000000 R08: 0000000000000006 R09: 0000000000000000
>> [   28.193020] R10: 0000000000000001 R11: 00000000dac664b5 R12: 0000000000000000
>> [   28.196013] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
>> [   28.197011] FS:  0000000000000000(0000) GS:ffffa074fbd00000(0000) knlGS:0000000000000000
>> [   28.201014] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [   28.201014] CR2: 0000000000000000 CR3: 00000003b6e10000 CR4: 00000000000406e0
>> [   28.205008] Call Trace:
>> [   28.205013]  ? request_resource_conflict+0x19/0x40
>> [   28.207013]  _raw_write_lock+0x2e/0x40
>> [   28.209008]  ? request_resource_conflict+0x19/0x40
>> [   28.209010]  request_resource_conflict+0x19/0x40
>> [   28.212013]  pci_amd_enable_64bit_bar+0x103/0x1a0
>> [   28.213025]  pci_fixup_device+0xd4/0x210
>> [   28.213025]  pci_setup_device+0x193/0x570
>> [   28.215010]  ? get_device+0x13/0x20
>> [   28.217008]  pci_scan_single_device+0x98/0xd0
>> [   28.217011]  pci_scan_slot+0x90/0x130
>> [   28.219010]  pci_scanild_bus_extend+0x3a/0x270
>> [   28.321008]  acpi_pci_root_create+0x1a9/0x210
>> [   28.321014]  ? pci_acpi_scan_root+0x135/0x1b0
>> [   28.324013]  pci_acpi_scan_root+0x15f/0x1b0
>> [   28.325008]  acpi_pci_root_add+0x283/0x560
>> [   28.325014]  ? acpi_match_device_ids+0xc/0x20
>> [   28.327013]  acpi_bus_attach+0xf9/0x1c0
>> [   28.329008]  acpi_bus_attach+0x82/0x1c0
>> [   28.329044]  acpi_bus_attach+0x82/0x1c0
>> [   28.331010]  acpi_bus_scan+0x47/0xa0
>> [   28.333008]  acpi_scan_init+0x12d/0x28d
>> [   28.333013]  ? bus_register+0x208/0x280
>> [   28.333013]  acpi_init+0x30f/0x36f
>> [   28.335010]  ? acpi_sleep_proc_init+0x24/0x24
>> [   28.337013]  do_one_initcall+0x4d/0x19c
>> [   28.337013]  ? do_early_param+0x29/0x86
>> [   28.340013]  kernel_init_freeable+0x209/0x2a4
>> [   28.341008]  ? set_debug_rodata+0x11/0x11
>> [   28.341011]  ? rest_init+0xc0/0xc0
>> [   28.343013]  kernel_init+0xa/0x104
>> [   28.345008]  ret_from_fork+0x24/0x30
>> [   28.345010] Code: 24 08 49 c1 e9 09 49 83 f1 01 41 83 e1 01 e8 73
>> e4 ff ff 65 48 8b 04 25 c0 d4 00 00 48 89 df c7 80 fc 0c 00 00 00 00
>> 00 00 57 9d <0f> 1f 44 00 00 48 83 c4 30 5b 5d 41 5c 41 5d 41 5e 41 5f
>> c3 65
>>
>> Since request_resource() will unconditionally return a conflict for invalid
>> regions, there will be no way to break out of the loop when enabling 64bit BAR.
>> Add checks and exit the loop in these cases without attempting to enable
>> BAR.
>>
>> Signed-off-by: Bandan Das <bsd@redhat.com>
>> ---
>>   arch/x86/pci/fixup.c | 7 ++++++-
>>   1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
>> index 1e996df..8933a1b 100644
>> --- a/arch/x86/pci/fixup.c
>> +++ b/arch/x86/pci/fixup.c
>> @@ -696,8 +696,13 @@ static void pci_amd_enable_64bit_bar(struct pci_dev *dev)
>>   	res->end = 0xfd00000000ull - 1;
>>     	/* Just grab the free area behind system memory for this */
>> -	while ((conflict = request_resource_conflict(&iomem_resource, res)))
>> +	while ((conflict = request_resource_conflict(&iomem_resource, res))) {
>> +		if ((res->start > res->end) ||
>> +		    (res->start < iomem_resource.start) ||
>> +		    (res->end > iomem_resource.end))
>> +			break;
>>   		res->start = conflict->end + 1;
>> +	}
>>     	dev_info(&dev->dev, "adding root bus resource %pR\n", res);
>>   

  reply	other threads:[~2017-12-07 19:41 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-07  8:00 [PATCH] x86/pci: Add a break condition when enabling BAR Bandan Das
2017-12-07 13:13 ` Christian König
2017-12-07 19:41   ` Bandan Das [this message]
2017-12-07 20:11     ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=jpgtvx2como.fsf@linux.bootlegged.copy \
    --to=bsd@redhat.com \
    --cc=bhelgaas@google.com \
    --cc=christian.koenig@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.