* [meta-oe][PATCH 1/2] meta-networking: Migrate dnsmasq into meta-networking
2012-09-03 0:50 [meta-oe][meta-networking] Migrate dnsmasq Joe MacDonald
@ 2012-09-03 0:50 ` Joe MacDonald
2012-09-03 0:50 ` [meta-oe][PATCH 2/2] meta-networking: stylize dnsmasq recipe Joe MacDonald
2012-09-03 6:09 ` [meta-oe][PATCH 1/2] meta-networking: Migrate dnsmasq into meta-networking Koen Kooi
0 siblings, 2 replies; 5+ messages in thread
From: Joe MacDonald @ 2012-09-03 0:50 UTC (permalink / raw)
To: openembedded-devel
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
---
.../recipes-daemons/dnsmasq/dnsmasq-dbus_2.55.bb | 13 +
.../recipes-daemons/dnsmasq/dnsmasq.inc | 29 ++
.../recipes-daemons/dnsmasq/dnsmasq_2.55.bb | 4 +
.../recipes-daemons/dnsmasq/files/dnsmasq.conf | 293 +++++++++++++++++++++
meta-networking/recipes-daemons/dnsmasq/files/init | 52 ++++
.../dnsmasq/dnsmasq-dbus_2.55.bb | 13 -
meta-oe/recipes-connectivity/dnsmasq/dnsmasq.inc | 29 --
.../recipes-connectivity/dnsmasq/dnsmasq_2.55.bb | 4 -
.../dnsmasq/files/dnsmasq.conf | 293 ---------------------
meta-oe/recipes-connectivity/dnsmasq/files/init | 52 ----
10 files changed, 391 insertions(+), 391 deletions(-)
create mode 100644 meta-networking/recipes-daemons/dnsmasq/dnsmasq-dbus_2.55.bb
create mode 100644 meta-networking/recipes-daemons/dnsmasq/dnsmasq.inc
create mode 100644 meta-networking/recipes-daemons/dnsmasq/dnsmasq_2.55.bb
create mode 100755 meta-networking/recipes-daemons/dnsmasq/files/dnsmasq.conf
create mode 100644 meta-networking/recipes-daemons/dnsmasq/files/init
delete mode 100644 meta-oe/recipes-connectivity/dnsmasq/dnsmasq-dbus_2.55.bb
delete mode 100644 meta-oe/recipes-connectivity/dnsmasq/dnsmasq.inc
delete mode 100644 meta-oe/recipes-connectivity/dnsmasq/dnsmasq_2.55.bb
delete mode 100755 meta-oe/recipes-connectivity/dnsmasq/files/dnsmasq.conf
delete mode 100644 meta-oe/recipes-connectivity/dnsmasq/files/init
diff --git a/meta-networking/recipes-daemons/dnsmasq/dnsmasq-dbus_2.55.bb b/meta-networking/recipes-daemons/dnsmasq/dnsmasq-dbus_2.55.bb
new file mode 100644
index 0000000..896952d
--- /dev/null
+++ b/meta-networking/recipes-daemons/dnsmasq/dnsmasq-dbus_2.55.bb
@@ -0,0 +1,13 @@
+# dnsmasq with support for DBus interface
+
+require dnsmasq_${PV}.bb
+
+S = "${WORKDIR}/dnsmasq-${PV}"
+
+DEPENDS = "dbus"
+EXTRA_OEMAKE = "COPTS=-DHAVE_DBUS"
+
+do_install_append () {
+ install -d ${D}${sysconfdir}/dbus-1/system.d
+ install -m 644 dbus/dnsmasq.conf ${D}${sysconfdir}/dbus-1/system.d/
+}
diff --git a/meta-networking/recipes-daemons/dnsmasq/dnsmasq.inc b/meta-networking/recipes-daemons/dnsmasq/dnsmasq.inc
new file mode 100644
index 0000000..e994852
--- /dev/null
+++ b/meta-networking/recipes-daemons/dnsmasq/dnsmasq.inc
@@ -0,0 +1,29 @@
+DESCRIPTION = "Dnsmasq is a lightweight, easy to configure DNS forwarder and DHCP server."
+HOMEPAGE = "http://www.thekelleys.org.uk/dnsmasq/doc.html"
+SECTION = "console/network"
+# GPLv3 was added in version 2.41 as license option
+LICENSE = "GPLv2 GPLv3"
+LIC_FILES_CHKSUM = "file://COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3 \
+ file://COPYING-v3;md5=d32239bcb673463ab874e80d47fae504"
+
+#at least versions 2.15 and prior are moved to the archive folder on the server
+SRC_URI = "http://www.thekelleys.org.uk/dnsmasq/${@['archive/', ''][float(bb.data.getVar('PV',d,1).split('.')[1]) > 15]}dnsmasq-${PV}.tar.gz;name=dnsmasq-${PV} \
+ file://init \
+ file://dnsmasq.conf"
+
+inherit update-rc.d
+
+INITSCRIPT_NAME = "dnsmasq"
+INITSCRIPT_PARAMS = "defaults"
+
+do_install () {
+ oe_runmake "PREFIX=${D}${prefix}" \
+ "BINDIR=${D}${bindir}" \
+ "MANDIR=${D}${mandir}" \
+ install
+ install -d ${D}${sysconfdir}/ ${D}${sysconfdir}/init.d ${D}${sysconfdir}/dnsmasq.d
+ install -m 644 ${WORKDIR}/dnsmasq.conf ${D}${sysconfdir}/
+ install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/dnsmasq
+}
+
+CONFFILES_${PN} = "${sysconfdir}/dnsmasq.conf"
diff --git a/meta-networking/recipes-daemons/dnsmasq/dnsmasq_2.55.bb b/meta-networking/recipes-daemons/dnsmasq/dnsmasq_2.55.bb
new file mode 100644
index 0000000..5f87704
--- /dev/null
+++ b/meta-networking/recipes-daemons/dnsmasq/dnsmasq_2.55.bb
@@ -0,0 +1,4 @@
+require dnsmasq.inc
+
+SRC_URI[dnsmasq-2.55.md5sum] = "b093d7c6bc7f97ae6fd35d048529232a"
+SRC_URI[dnsmasq-2.55.sha256sum] = "cf63ecf5977f00474cbda98376a9d8743500a82fd98e13f43d7037bce9f9f929"
diff --git a/meta-networking/recipes-daemons/dnsmasq/files/dnsmasq.conf b/meta-networking/recipes-daemons/dnsmasq/files/dnsmasq.conf
new file mode 100755
index 0000000..1a198a3
--- /dev/null
+++ b/meta-networking/recipes-daemons/dnsmasq/files/dnsmasq.conf
@@ -0,0 +1,293 @@
+# Configuration file for dnsmasq.
+#
+# Format is one option per line, legal options are the same
+# as the long options legal on the command line. See
+# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
+
+# Change these lines if you want dnsmasq to serve MX records.
+# Only one of mx-host and mx-target need be set, the other defaults
+# to the name of the host running dnsmasq.
+#mx-host=
+#mx-target=
+#selfmx
+#localmx
+
+# The following two options make you a better netizen, since they
+# tell dnsmasq to filter out queries which the public DNS cannot
+# answer, and which load the servers (especially the root servers)
+# uneccessarily. If you have a dial-on-demand link they also stop
+# these requests from bringing up the link uneccessarily.
+
+# Never forward plain names (with a dot or domain part)
+domain-needed
+# Never forward addresses in the non-routed address spaces.
+bogus-priv
+
+
+# Uncomment this to filter useless windows-originated DNS requests
+# which can trigger dial-on-demand links needlessly.
+# Note that (amongst other things) this blocks all SRV requests,
+# so don't use it if you use eg Kerberos.
+#filterwin2k
+
+# Change this line if you want dns to get its upstream servers from
+# somewhere other that /etc/resolv.conf
+#resolv-file=
+
+# By default, dnsmasq will send queries to any of the upstream
+# servers it knows about and tries to favour servers to are known
+# to be up. Uncommenting this forces dnsmasq to try each query
+# with each server strictly in the order they appear in
+# /etc/resolv.conf
+#strict-order
+
+# If you don't want dnsmasq to read /etc/resolv.conf or any other
+# file, getting its servers for this file instead (see below), then
+# uncomment this
+#no-resolv
+
+# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
+# files for changes and re-read them then uncomment this.
+#no-poll
+
+# Add other name servers here, with domain specs if they are for
+# non-public domains.
+#server=/localnet/192.168.0.1
+
+# Add local-only domains here, queries in these domains are answered
+# from /etc/hosts or DHCP only.
+#local=/localnet/
+
+# Add domains which you want to force to an IP address here.
+# The example below send any host in doubleclick.net to a local
+# webserver.
+#address=/doubleclick.net/127.0.0.1
+
+# You no longer (as of version 1.7) need to set these to enable
+# dnsmasq to read /etc/ppp/resolv.conf since dnsmasq now uses the
+# "dip" group to achieve this.
+#user=
+#group=
+
+# If you want dnsmasq to listen for requests only on specified interfaces
+# (and the loopback) give the name of the interface (eg eth0) here.
+# Repeat the line for more than one interface.
+#interface=
+# Or you can specify which interface _not_ to listen on
+#except-interface=
+# Or which to listen on by address (remember to include 127.0.0.1 if
+# you use this.)
+#listen-address=
+
+# On systems which support it, dnsmasq binds the wildcard address,
+# even when it is listening on only some interfaces. It then discards
+# requests that it shouldn't reply to. This has the advantage of
+# working even when interfaces come and go and change address. If you
+# want dnsmasq to really bind only the interfaces it is listening on,
+# uncomment this option. About the only time you may need this is when
+# running another nameserver on the same machine.
+#bind-interfaces
+
+# If you don't want dnsmasq to read /etc/hosts, uncomment the
+# following line.
+#no-hosts
+# or if you want it to read another file, as well as /etc/hosts, use
+# this.
+#addn-hosts=/etc/banner_add_hosts
+
+# Set this (and domain: see below) if you want to have a domain
+# automatically added to simple names in a hosts-file.
+#expand-hosts
+
+# Set the domain for dnsmasq. this is optional, but if it is set, it
+# does the following things.
+# 1) Allows DHCP hosts to have fully qualified domain names, as long
+# as the domain part matches this setting.
+# 2) Sets the "domain" DHCP option thereby potentially setting the
+# domain of all systems configured by DHCP
+# 3) Provides the domain part for "expand-hosts"
+#domain=thekelleys.org.uk
+
+# Uncomment this to enable the integrated DHCP server, you need
+# to supply the range of addresses available for lease and optionally
+# a lease time. If you have more than one network, you will need to
+# repeat this for each network on which you want to supply DHCP
+# service.
+#dhcp-range=192.168.0.50,192.168.0.150,12h
+dhcp-range=10.0.0.10,10.0.0.200,2h
+
+# This is an example of a DHCP range where the netmask is given. This
+# is needed for networks we reach the dnsmasq DHCP server via a relay
+# agent. If you don't know what a DHCP relay agent is, you probably
+# don't need to worry about this.
+#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
+
+# This is an example of a DHCP range with a network-id, so that
+# some DHCP options may be set only for this network.
+#dhcp-range=red,192.168.0.50,192.168.0.150
+
+# Supply parameters for specified hosts using DHCP. There are lots
+# of valid alternatives, so we will give examples of each. Note that
+# IP addresses DO NOT have to be in the range given above, they just
+# need to be on the same network. The order of the parameters in these
+# do not matter, it's permissble to give name,adddress and MAC in any order
+
+# Always allocate the host with ethernet address 11:22:33:44:55:66
+# The IP address 192.168.0.60
+#dhcp-host=11:22:33:44:55:66,192.168.0.60
+
+# Always set the name of the host with hardware address
+# 11:22:33:44:55:66 to be "fred"
+#dhcp-host=11:22:33:44:55:66,fred
+
+# Always give the host with ethernet address 11:22:33:44:55:66
+# the name fred and IP address 192.168.0.60 and lease time 45 minutes
+#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
+
+# Give the machine which says it's name is "bert" IP address
+# 192.168.0.70 and an infinite lease
+#dhcp-host=bert,192.168.0.70,infinite
+
+# Always give the host with client identifier 01:02:02:04
+# the IP address 192.168.0.60
+#dhcp-host=id:01:02:02:04,192.168.0.60
+
+# Always give the host with client identifier "marjorie"
+# the IP address 192.168.0.60
+#dhcp-host=id:marjorie,192.168.0.60
+
+# Enable the address given for "judge" in /etc/hosts
+# to be given to a machine presenting the name "judge" when
+# it asks for a DHCP lease.
+#dhcp-host=judge
+
+# Never offer DHCP service to a machine whose ethernet
+# address is 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,ignore
+
+# Ignore any client-id presented by the machine with ethernet
+# address 11:22:33:44:55:66. This is useful to prevent a machine
+# being treated differently when running under different OS's or
+# between PXE boot and OS boot.
+#dhcp-host=11:22:33:44:55:66,id:*
+
+# Send extra options which are tagged as "red" to
+# the machine with ethernet address 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,net:red
+
+# Send extra options which are tagged as "red" to any machine whose
+# DHCP vendorclass string includes the substring "Linux"
+#dhcp-vendorclass=red,Linux
+
+# Send extra options which are tagged as "red" to any machine one
+# of whose DHCP userclass strings includes the substring "accounts"
+#dhcp-userclass=red,accounts
+
+# If this line is uncommented, dnsmasq will read /etc/ethers and act
+# on the ethernet-address/IP pairs found there just as if they had
+# been given as --dhcp-host options. Useful if you keep
+# MAC-address/host mappings there for other purposes.
+#read-ethers
+
+# Send options to hosts which ask for a DHCP lease.
+# See RFC 2132 for details of available options.
+# Note that all the common settings, such as netmask and
+# broadcast address, DNS server and default route, are given
+# sane defaults by dnsmasq. You very likely will not need any
+# any dhcp-options. If you use Windows clients and Samba, there
+# are some options which are recommended, they are detailed at the
+# end of this section.
+# For reference, the common options are:
+# subnet mask - 1
+# default router - 3
+# DNS server - 6
+# broadcast address - 28
+
+# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
+#dhcp-option=42,192.168.0.4,10.10.0.5
+
+# Set the NTP time server address to be the same machine as
+# is running dnsmasq
+#dhcp-option=42,0.0.0.0
+
+# Set the NIS domain name to "welly"
+#dhcp-option=40,welly
+
+# Set the default time-to-live to 50
+#dhcp-option=23,50
+
+# Set the "all subnets are local" flag
+#dhcp-option=27,1
+
+# Send the etherboot magic flag and then etherboot options (a string).
+#dhcp-option=128,e4:45:74:68:00:00
+#dhcp-option=129,NIC=eepro100
+
+# Specify an option which will only be sent to the "red" network
+# (see dhcp-range for the declaration of the "red" network)
+#dhcp-option=red,42,192.168.1.1
+
+# The following DHCP options set up dnsmasq in the same way as is specified
+# for the ISC dhcpcd in
+# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
+# adapted for a typical dnsmasq installation where the host running
+# dnsmasq is also the host running samba.
+# you may want to uncomment them if you use Windows clients and Samba.
+#dhcp-option=19,0 # option ip-forwarding off
+#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
+#dhcp-option=45,0.0.0.0 # netbios datagram distribution server
+#dhcp-option=46,8 # netbios node type
+#dhcp-option=47 # empty netbios scope.
+
+
+# Set the boot filename and tftpd server name and address
+# for BOOTP. You will only need this is you want to
+# boot machines over the network.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
+
+# Set the limit on DHCP leases, the default is 150
+#dhcp-lease-max=150
+
+# The DHCP server needs somewhere on disk to keep its lease database.
+# This defaults to a sane location, but if you want to change it, use
+# the line below.
+#dhcp-leasefile=/var/lib/misc/dnsmasq.leases
+
+# Set the cachesize here.
+#cache-size=150
+
+# If you want to disable negative caching, uncomment this.
+#no-negcache
+
+# Normally responses which come form /etc/hosts and the DHCP lease
+# file have Time-To-Live set as zero, which conventionally means
+# do not cache further. If you are happy to trade lower load on the
+# server for potentially stale date, you can set a time-to-live (in
+# seconds) here.
+#local-ttl=
+
+# If you want dnsmasq to detect attempts by Verisign to send queries
+# to unregistered .com and .net hosts to its sitefinder service and
+# have dnsmasq instead return the correct NXDOMAIN response, uncomment
+# this line. You can add similar lines to do the same for other
+# registries which have implemented wildcard A records.
+#bogus-nxdomain=64.94.110.11
+
+# If you want to fix up DNS results from upstream servers, use the
+# alias option. This only works for IPv4.
+# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
+#alias=1.2.3.4,5.6.7.8
+# and this maps 1.2.3.x to 5.6.7.x
+#alias=1.2.3.0,5.6.7.0,255.255.255.0
+
+# For debugging purposes, log each DNS query as it passes through
+# dnsmasq.
+#log-queries
+
+# Include a another lot of configuration options.
+#conf-file=/etc/dnsmasq.more.conf
+
+
+
+
+
diff --git a/meta-networking/recipes-daemons/dnsmasq/files/init b/meta-networking/recipes-daemons/dnsmasq/files/init
new file mode 100644
index 0000000..d1aa9e5
--- /dev/null
+++ b/meta-networking/recipes-daemons/dnsmasq/files/init
@@ -0,0 +1,52 @@
+#!/bin/sh
+DAEMON=/usr/bin/dnsmasq
+NAME=dnsmasq
+DESC="DNS forwarder and DHCP server"
+ARGS="-7 /etc/dnsmasq.d"
+
+test -f $DAEMON || exit 0
+
+set -e
+
+case "$1" in
+ start)
+ echo -n "starting $DESC: $NAME... "
+ test -d /var/lib/misc/ || mkdir /var/lib/misc/
+ start-stop-daemon -S -x $DAEMON -- $ARGS
+ echo "done."
+ ;;
+ stop)
+ echo -n "stopping $DESC: $NAME... "
+ start-stop-daemon -K -x $DAEMON
+ echo "done."
+ ;;
+ status)
+ echo -n "dnsmasq "
+ start-stop-daemon -q -K -t -x $DAEMON
+ RET=$?
+ if [ "$RET" = "0" ]; then
+ PID=`cat /var/run/dnsmasq.pid`
+ echo "($PID) is running"
+ else
+ echo "is not running"
+ exit $RET
+ fi
+ ;;
+ restart)
+ echo "restarting $DESC: $NAME... "
+ $0 stop
+ $0 start
+ echo "done."
+ ;;
+ reload)
+ echo -n "reloading $DESC: $NAME... "
+ killall -HUP $(basename ${DAEMON})
+ echo "done."
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|status|restart|reload}"
+ exit 1
+ ;;
+esac
+
+exit 0
diff --git a/meta-oe/recipes-connectivity/dnsmasq/dnsmasq-dbus_2.55.bb b/meta-oe/recipes-connectivity/dnsmasq/dnsmasq-dbus_2.55.bb
deleted file mode 100644
index 896952d..0000000
--- a/meta-oe/recipes-connectivity/dnsmasq/dnsmasq-dbus_2.55.bb
+++ /dev/null
@@ -1,13 +0,0 @@
-# dnsmasq with support for DBus interface
-
-require dnsmasq_${PV}.bb
-
-S = "${WORKDIR}/dnsmasq-${PV}"
-
-DEPENDS = "dbus"
-EXTRA_OEMAKE = "COPTS=-DHAVE_DBUS"
-
-do_install_append () {
- install -d ${D}${sysconfdir}/dbus-1/system.d
- install -m 644 dbus/dnsmasq.conf ${D}${sysconfdir}/dbus-1/system.d/
-}
diff --git a/meta-oe/recipes-connectivity/dnsmasq/dnsmasq.inc b/meta-oe/recipes-connectivity/dnsmasq/dnsmasq.inc
deleted file mode 100644
index e994852..0000000
--- a/meta-oe/recipes-connectivity/dnsmasq/dnsmasq.inc
+++ /dev/null
@@ -1,29 +0,0 @@
-DESCRIPTION = "Dnsmasq is a lightweight, easy to configure DNS forwarder and DHCP server."
-HOMEPAGE = "http://www.thekelleys.org.uk/dnsmasq/doc.html"
-SECTION = "console/network"
-# GPLv3 was added in version 2.41 as license option
-LICENSE = "GPLv2 GPLv3"
-LIC_FILES_CHKSUM = "file://COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3 \
- file://COPYING-v3;md5=d32239bcb673463ab874e80d47fae504"
-
-#at least versions 2.15 and prior are moved to the archive folder on the server
-SRC_URI = "http://www.thekelleys.org.uk/dnsmasq/${@['archive/', ''][float(bb.data.getVar('PV',d,1).split('.')[1]) > 15]}dnsmasq-${PV}.tar.gz;name=dnsmasq-${PV} \
- file://init \
- file://dnsmasq.conf"
-
-inherit update-rc.d
-
-INITSCRIPT_NAME = "dnsmasq"
-INITSCRIPT_PARAMS = "defaults"
-
-do_install () {
- oe_runmake "PREFIX=${D}${prefix}" \
- "BINDIR=${D}${bindir}" \
- "MANDIR=${D}${mandir}" \
- install
- install -d ${D}${sysconfdir}/ ${D}${sysconfdir}/init.d ${D}${sysconfdir}/dnsmasq.d
- install -m 644 ${WORKDIR}/dnsmasq.conf ${D}${sysconfdir}/
- install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/dnsmasq
-}
-
-CONFFILES_${PN} = "${sysconfdir}/dnsmasq.conf"
diff --git a/meta-oe/recipes-connectivity/dnsmasq/dnsmasq_2.55.bb b/meta-oe/recipes-connectivity/dnsmasq/dnsmasq_2.55.bb
deleted file mode 100644
index 5f87704..0000000
--- a/meta-oe/recipes-connectivity/dnsmasq/dnsmasq_2.55.bb
+++ /dev/null
@@ -1,4 +0,0 @@
-require dnsmasq.inc
-
-SRC_URI[dnsmasq-2.55.md5sum] = "b093d7c6bc7f97ae6fd35d048529232a"
-SRC_URI[dnsmasq-2.55.sha256sum] = "cf63ecf5977f00474cbda98376a9d8743500a82fd98e13f43d7037bce9f9f929"
diff --git a/meta-oe/recipes-connectivity/dnsmasq/files/dnsmasq.conf b/meta-oe/recipes-connectivity/dnsmasq/files/dnsmasq.conf
deleted file mode 100755
index 1a198a3..0000000
--- a/meta-oe/recipes-connectivity/dnsmasq/files/dnsmasq.conf
+++ /dev/null
@@ -1,293 +0,0 @@
-# Configuration file for dnsmasq.
-#
-# Format is one option per line, legal options are the same
-# as the long options legal on the command line. See
-# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
-
-# Change these lines if you want dnsmasq to serve MX records.
-# Only one of mx-host and mx-target need be set, the other defaults
-# to the name of the host running dnsmasq.
-#mx-host=
-#mx-target=
-#selfmx
-#localmx
-
-# The following two options make you a better netizen, since they
-# tell dnsmasq to filter out queries which the public DNS cannot
-# answer, and which load the servers (especially the root servers)
-# uneccessarily. If you have a dial-on-demand link they also stop
-# these requests from bringing up the link uneccessarily.
-
-# Never forward plain names (with a dot or domain part)
-domain-needed
-# Never forward addresses in the non-routed address spaces.
-bogus-priv
-
-
-# Uncomment this to filter useless windows-originated DNS requests
-# which can trigger dial-on-demand links needlessly.
-# Note that (amongst other things) this blocks all SRV requests,
-# so don't use it if you use eg Kerberos.
-#filterwin2k
-
-# Change this line if you want dns to get its upstream servers from
-# somewhere other that /etc/resolv.conf
-#resolv-file=
-
-# By default, dnsmasq will send queries to any of the upstream
-# servers it knows about and tries to favour servers to are known
-# to be up. Uncommenting this forces dnsmasq to try each query
-# with each server strictly in the order they appear in
-# /etc/resolv.conf
-#strict-order
-
-# If you don't want dnsmasq to read /etc/resolv.conf or any other
-# file, getting its servers for this file instead (see below), then
-# uncomment this
-#no-resolv
-
-# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
-# files for changes and re-read them then uncomment this.
-#no-poll
-
-# Add other name servers here, with domain specs if they are for
-# non-public domains.
-#server=/localnet/192.168.0.1
-
-# Add local-only domains here, queries in these domains are answered
-# from /etc/hosts or DHCP only.
-#local=/localnet/
-
-# Add domains which you want to force to an IP address here.
-# The example below send any host in doubleclick.net to a local
-# webserver.
-#address=/doubleclick.net/127.0.0.1
-
-# You no longer (as of version 1.7) need to set these to enable
-# dnsmasq to read /etc/ppp/resolv.conf since dnsmasq now uses the
-# "dip" group to achieve this.
-#user=
-#group=
-
-# If you want dnsmasq to listen for requests only on specified interfaces
-# (and the loopback) give the name of the interface (eg eth0) here.
-# Repeat the line for more than one interface.
-#interface=
-# Or you can specify which interface _not_ to listen on
-#except-interface=
-# Or which to listen on by address (remember to include 127.0.0.1 if
-# you use this.)
-#listen-address=
-
-# On systems which support it, dnsmasq binds the wildcard address,
-# even when it is listening on only some interfaces. It then discards
-# requests that it shouldn't reply to. This has the advantage of
-# working even when interfaces come and go and change address. If you
-# want dnsmasq to really bind only the interfaces it is listening on,
-# uncomment this option. About the only time you may need this is when
-# running another nameserver on the same machine.
-#bind-interfaces
-
-# If you don't want dnsmasq to read /etc/hosts, uncomment the
-# following line.
-#no-hosts
-# or if you want it to read another file, as well as /etc/hosts, use
-# this.
-#addn-hosts=/etc/banner_add_hosts
-
-# Set this (and domain: see below) if you want to have a domain
-# automatically added to simple names in a hosts-file.
-#expand-hosts
-
-# Set the domain for dnsmasq. this is optional, but if it is set, it
-# does the following things.
-# 1) Allows DHCP hosts to have fully qualified domain names, as long
-# as the domain part matches this setting.
-# 2) Sets the "domain" DHCP option thereby potentially setting the
-# domain of all systems configured by DHCP
-# 3) Provides the domain part for "expand-hosts"
-#domain=thekelleys.org.uk
-
-# Uncomment this to enable the integrated DHCP server, you need
-# to supply the range of addresses available for lease and optionally
-# a lease time. If you have more than one network, you will need to
-# repeat this for each network on which you want to supply DHCP
-# service.
-#dhcp-range=192.168.0.50,192.168.0.150,12h
-dhcp-range=10.0.0.10,10.0.0.200,2h
-
-# This is an example of a DHCP range where the netmask is given. This
-# is needed for networks we reach the dnsmasq DHCP server via a relay
-# agent. If you don't know what a DHCP relay agent is, you probably
-# don't need to worry about this.
-#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
-
-# This is an example of a DHCP range with a network-id, so that
-# some DHCP options may be set only for this network.
-#dhcp-range=red,192.168.0.50,192.168.0.150
-
-# Supply parameters for specified hosts using DHCP. There are lots
-# of valid alternatives, so we will give examples of each. Note that
-# IP addresses DO NOT have to be in the range given above, they just
-# need to be on the same network. The order of the parameters in these
-# do not matter, it's permissble to give name,adddress and MAC in any order
-
-# Always allocate the host with ethernet address 11:22:33:44:55:66
-# The IP address 192.168.0.60
-#dhcp-host=11:22:33:44:55:66,192.168.0.60
-
-# Always set the name of the host with hardware address
-# 11:22:33:44:55:66 to be "fred"
-#dhcp-host=11:22:33:44:55:66,fred
-
-# Always give the host with ethernet address 11:22:33:44:55:66
-# the name fred and IP address 192.168.0.60 and lease time 45 minutes
-#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
-
-# Give the machine which says it's name is "bert" IP address
-# 192.168.0.70 and an infinite lease
-#dhcp-host=bert,192.168.0.70,infinite
-
-# Always give the host with client identifier 01:02:02:04
-# the IP address 192.168.0.60
-#dhcp-host=id:01:02:02:04,192.168.0.60
-
-# Always give the host with client identifier "marjorie"
-# the IP address 192.168.0.60
-#dhcp-host=id:marjorie,192.168.0.60
-
-# Enable the address given for "judge" in /etc/hosts
-# to be given to a machine presenting the name "judge" when
-# it asks for a DHCP lease.
-#dhcp-host=judge
-
-# Never offer DHCP service to a machine whose ethernet
-# address is 11:22:33:44:55:66
-#dhcp-host=11:22:33:44:55:66,ignore
-
-# Ignore any client-id presented by the machine with ethernet
-# address 11:22:33:44:55:66. This is useful to prevent a machine
-# being treated differently when running under different OS's or
-# between PXE boot and OS boot.
-#dhcp-host=11:22:33:44:55:66,id:*
-
-# Send extra options which are tagged as "red" to
-# the machine with ethernet address 11:22:33:44:55:66
-#dhcp-host=11:22:33:44:55:66,net:red
-
-# Send extra options which are tagged as "red" to any machine whose
-# DHCP vendorclass string includes the substring "Linux"
-#dhcp-vendorclass=red,Linux
-
-# Send extra options which are tagged as "red" to any machine one
-# of whose DHCP userclass strings includes the substring "accounts"
-#dhcp-userclass=red,accounts
-
-# If this line is uncommented, dnsmasq will read /etc/ethers and act
-# on the ethernet-address/IP pairs found there just as if they had
-# been given as --dhcp-host options. Useful if you keep
-# MAC-address/host mappings there for other purposes.
-#read-ethers
-
-# Send options to hosts which ask for a DHCP lease.
-# See RFC 2132 for details of available options.
-# Note that all the common settings, such as netmask and
-# broadcast address, DNS server and default route, are given
-# sane defaults by dnsmasq. You very likely will not need any
-# any dhcp-options. If you use Windows clients and Samba, there
-# are some options which are recommended, they are detailed at the
-# end of this section.
-# For reference, the common options are:
-# subnet mask - 1
-# default router - 3
-# DNS server - 6
-# broadcast address - 28
-
-# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
-#dhcp-option=42,192.168.0.4,10.10.0.5
-
-# Set the NTP time server address to be the same machine as
-# is running dnsmasq
-#dhcp-option=42,0.0.0.0
-
-# Set the NIS domain name to "welly"
-#dhcp-option=40,welly
-
-# Set the default time-to-live to 50
-#dhcp-option=23,50
-
-# Set the "all subnets are local" flag
-#dhcp-option=27,1
-
-# Send the etherboot magic flag and then etherboot options (a string).
-#dhcp-option=128,e4:45:74:68:00:00
-#dhcp-option=129,NIC=eepro100
-
-# Specify an option which will only be sent to the "red" network
-# (see dhcp-range for the declaration of the "red" network)
-#dhcp-option=red,42,192.168.1.1
-
-# The following DHCP options set up dnsmasq in the same way as is specified
-# for the ISC dhcpcd in
-# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
-# adapted for a typical dnsmasq installation where the host running
-# dnsmasq is also the host running samba.
-# you may want to uncomment them if you use Windows clients and Samba.
-#dhcp-option=19,0 # option ip-forwarding off
-#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
-#dhcp-option=45,0.0.0.0 # netbios datagram distribution server
-#dhcp-option=46,8 # netbios node type
-#dhcp-option=47 # empty netbios scope.
-
-
-# Set the boot filename and tftpd server name and address
-# for BOOTP. You will only need this is you want to
-# boot machines over the network.
-#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
-
-# Set the limit on DHCP leases, the default is 150
-#dhcp-lease-max=150
-
-# The DHCP server needs somewhere on disk to keep its lease database.
-# This defaults to a sane location, but if you want to change it, use
-# the line below.
-#dhcp-leasefile=/var/lib/misc/dnsmasq.leases
-
-# Set the cachesize here.
-#cache-size=150
-
-# If you want to disable negative caching, uncomment this.
-#no-negcache
-
-# Normally responses which come form /etc/hosts and the DHCP lease
-# file have Time-To-Live set as zero, which conventionally means
-# do not cache further. If you are happy to trade lower load on the
-# server for potentially stale date, you can set a time-to-live (in
-# seconds) here.
-#local-ttl=
-
-# If you want dnsmasq to detect attempts by Verisign to send queries
-# to unregistered .com and .net hosts to its sitefinder service and
-# have dnsmasq instead return the correct NXDOMAIN response, uncomment
-# this line. You can add similar lines to do the same for other
-# registries which have implemented wildcard A records.
-#bogus-nxdomain=64.94.110.11
-
-# If you want to fix up DNS results from upstream servers, use the
-# alias option. This only works for IPv4.
-# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
-#alias=1.2.3.4,5.6.7.8
-# and this maps 1.2.3.x to 5.6.7.x
-#alias=1.2.3.0,5.6.7.0,255.255.255.0
-
-# For debugging purposes, log each DNS query as it passes through
-# dnsmasq.
-#log-queries
-
-# Include a another lot of configuration options.
-#conf-file=/etc/dnsmasq.more.conf
-
-
-
-
-
diff --git a/meta-oe/recipes-connectivity/dnsmasq/files/init b/meta-oe/recipes-connectivity/dnsmasq/files/init
deleted file mode 100644
index d1aa9e5..0000000
--- a/meta-oe/recipes-connectivity/dnsmasq/files/init
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh
-DAEMON=/usr/bin/dnsmasq
-NAME=dnsmasq
-DESC="DNS forwarder and DHCP server"
-ARGS="-7 /etc/dnsmasq.d"
-
-test -f $DAEMON || exit 0
-
-set -e
-
-case "$1" in
- start)
- echo -n "starting $DESC: $NAME... "
- test -d /var/lib/misc/ || mkdir /var/lib/misc/
- start-stop-daemon -S -x $DAEMON -- $ARGS
- echo "done."
- ;;
- stop)
- echo -n "stopping $DESC: $NAME... "
- start-stop-daemon -K -x $DAEMON
- echo "done."
- ;;
- status)
- echo -n "dnsmasq "
- start-stop-daemon -q -K -t -x $DAEMON
- RET=$?
- if [ "$RET" = "0" ]; then
- PID=`cat /var/run/dnsmasq.pid`
- echo "($PID) is running"
- else
- echo "is not running"
- exit $RET
- fi
- ;;
- restart)
- echo "restarting $DESC: $NAME... "
- $0 stop
- $0 start
- echo "done."
- ;;
- reload)
- echo -n "reloading $DESC: $NAME... "
- killall -HUP $(basename ${DAEMON})
- echo "done."
- ;;
- *)
- echo "Usage: $0 {start|stop|status|restart|reload}"
- exit 1
- ;;
-esac
-
-exit 0
--
1.7.11.3
^ permalink raw reply related [flat|nested] 5+ messages in thread