From: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
To: linux-kernel@vger.kernel.org
Subject: [regression] 3.7 ends in APIC panic
Date: Thu, 13 Dec 2012 13:16:36 +0100 [thread overview]
Message-ID: <kacgv2$efh$1@ger.gmane.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 492 bytes --]
Hello,
I just tried to boot 3.7 and it ends in an APIC panic. I tried to use
the recommended "apic=debug", but that does not change anything in the
output, at least not in the visible part. The last known kernel to boot
was 3.5. If it matters I can try to boot 3.6.
Also, the recommended "noapic" option makes it boot a little bit
further, but then ahci does not work properly and fails to detect hard
disks.
Attached is a photo from the failure and dmesg with 3.4.7.
Cheers,
BErnd
[-- Attachment #2: 2012-12-13_11-06-50.jpg --]
[-- Type: image/jpeg, Size: 122273 bytes --]
[-- Attachment #3: 3.4.7.dmesg --]
[-- Type: text/plain, Size: 69166 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.7 (schubert@fsdevel3) (gcc version 4.7.1 (Debian 4.7.1-2) ) #23 SMP Wed Aug 1 18:33:44 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.4.7 root=/dev/mapper/vg_fuj2-root ro pcie_aspm=force
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000b59c5000 (usable)
[ 0.000000] BIOS-e820: 00000000b59c5000 - 00000000b5a0d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b5a0d000 - 00000000b5b3b000 (reserved)
[ 0.000000] BIOS-e820: 00000000b5b3b000 - 00000000b5b43000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b5b43000 - 00000000b6baa000 (reserved)
[ 0.000000] BIOS-e820: 00000000b6baa000 - 00000000b6bc9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b6bc9000 - 00000000b6bf2000 (reserved)
[ 0.000000] BIOS-e820: 00000000b6bf2000 - 00000000b6c35000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b6c35000 - 00000000b6dbd000 (usable)
[ 0.000000] BIOS-e820: 00000000b6dbd000 - 00000000b6ff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000b6ff4000 - 00000000b7000000 (usable)
[ 0.000000] BIOS-e820: 00000000b7800000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000043e600000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: FUJITSU ESPRIMO P900/D3062-A1, BIOS V4.6.4.0 R1.24.0 for D3062-A1x 05/25/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x43e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0B7800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 43E600000 mask FFFE00000 uncachable
[ 0.000000] 6 base 43E800000 mask FFF800000 uncachable
[ 0.000000] 7 base 43F000000 mask FFF000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 2936MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 2944MB, range: 128MB, type UC
[ 0.000000] reg 4, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 5, base: 17382MB, range: 2MB, type UC
[ 0.000000] reg 6, base: 17384MB, range: 8MB, type UC
[ 0.000000] reg 7, base: 17392MB, range: 16MB, type UC
[ 0.000000] total RAM covered: 16222M
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 102M
[ 0.000000] *BAD*gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: -16M
[ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 10 lose cover RAM: 102M
[ 0.000000] *BAD*gran_size: 128K chunk_size: 32M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 128K chunk_size: 64M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 128K chunk_size: 128M num_reg: 10 lose cover RAM: -16M
[ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 128K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 10 lose cover RAM: 102M
[ 0.000000] *BAD*gran_size: 256K chunk_size: 32M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 256K chunk_size: 64M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 256K chunk_size: 128M num_reg: 10 lose cover RAM: -16M
[ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 256K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 10 lose cover RAM: 102M
[ 0.000000] *BAD*gran_size: 512K chunk_size: 32M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 512K chunk_size: 64M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 512K chunk_size: 128M num_reg: 10 lose cover RAM: -16M
[ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 512K chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 10 lose cover RAM: 102M
[ 0.000000] *BAD*gran_size: 1M chunk_size: 32M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 1M chunk_size: 64M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 1M chunk_size: 128M num_reg: 10 lose cover RAM: -16M
[ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 1M chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 10 lose cover RAM: 102M
[ 0.000000] *BAD*gran_size: 2M chunk_size: 32M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 2M chunk_size: 64M num_reg: 10 lose cover RAM: -16M
[ 0.000000] *BAD*gran_size: 2M chunk_size: 128M num_reg: 10 lose cover RAM: -16M
[ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 512M num_reg: 10 lose cover RAM: 0G
[ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 10 lose cover RAM: 0G
[ 0.000000] *BAD*gran_size: 2M chunk_size: 2G num_reg: 10 lose cover RAM: -1G
[ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 10 lose cover RAM: 102M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 32M num_reg: 10 lose cover RAM: -14M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 64M num_reg: 10 lose cover RAM: -14M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 128M num_reg: 10 lose cover RAM: -14M
[ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 10 lose cover RAM: 2M
[ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 10 lose cover RAM: 2M
[ 0.000000] *BAD*gran_size: 4M chunk_size: 2G num_reg: 10 lose cover RAM: -1022M
[ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 10 lose cover RAM: 486M
[ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 10 lose cover RAM: 102M
[ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 10 lose cover RAM: 102M
[ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 9 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 9 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 8 lose cover RAM: 6M
[ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 9 lose cover RAM: 6M
[ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 10 lose cover RAM: 238M
[ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 10 lose cover RAM: 110M
[ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 9 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 9 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 8 lose cover RAM: 14M
[ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 9 lose cover RAM: 14M
[ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 10 lose cover RAM: 126M
[ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 9 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 9 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 8 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 8 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 8 lose cover RAM: 30M
[ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 9 lose cover RAM: 30M
[ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 10 lose cover RAM: 94M
[ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 9 lose cover RAM: 94M
[ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 8 lose cover RAM: 94M
[ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 8 lose cover RAM: 94M
[ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 8 lose cover RAM: 94M
[ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 9 lose cover RAM: 94M
[ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 8 lose cover RAM: 222M
[ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 222M
[ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 7 lose cover RAM: 222M
[ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 7 lose cover RAM: 222M
[ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 8 lose cover RAM: 222M
[ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 7 lose cover RAM: 350M
[ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 7 lose cover RAM: 350M
[ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 7 lose cover RAM: 350M
[ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 8 lose cover RAM: 350M
[ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 5 lose cover RAM: 862M
[ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 7 lose cover RAM: 862M
[ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 8 lose cover RAM: 862M
[ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 3 lose cover RAM: 1886M
[ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 3 lose cover RAM: 1886M
[ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 3 lose cover RAM: 1886M
[ 0.000000] mtrr_cleanup: can not find optimal value
[ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[ 0.000000] e820 update range: 00000000b7800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] x2apic enabled by BIOS, switching to x2apic ops
[ 0.000000] last_pfn = 0xb7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd900] fd900
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b7000000
[ 0.000000] 0000000000 - 00b7000000 page 2M
[ 0.000000] kernel direct mapping tables up to b7000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000043e600000
[ 0.000000] 0100000000 - 043e600000 page 2M
[ 0.000000] kernel direct mapping tables up to 43e600000 @ b6dab000-b6dbd000
[ 0.000000] RAMDISK: 23746000 - 2db9b000
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 FTS )
[ 0.000000] ACPI: XSDT 00000000b5b3b078 0006C (v01 FSC PC 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000b5b42770 000F4 (v04 FTS D3062-A1 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000b5b3b170 075FD (v02 FTS D3062-A1 00000017 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000b6baff80 00040
[ 0.000000] ACPI: APIC 00000000b5b42868 00098 (v03 FTS D3062-A1 01072009 AMI 00010013)
[ 0.000000] ACPI: TCPA 00000000b5b42900 00032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000b5b42938 00106 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000b5b42a40 0003C (v01 FTS D3062-A1 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000b5b42a80 00038 (v01 FTS D3062-A1 01072009 AMI. 00000004)
[ 0.000000] ACPI: SLIC 00000000b5b42ab8 00176 (v01 FSC PC 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 00000000b5b42c30 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 00000000b5b42cd0 000E8 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to cluster x2apic.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000043e600000
[ 0.000000] Initmem setup node 0 0000000000000000-000000043e600000
[ 0.000000] NODE_DATA [000000043e5fc000 - 000000043e5fffff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042de00000-ffff88043dbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0043e600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000b59c5
[ 0.000000] 0: 0x000b6c35 -> 0x000b6dbd
[ 0.000000] 0: 0x000b6ff4 -> 0x000b7000
[ 0.000000] 0: 0x00100000 -> 0x0043e600
[ 0.000000] On node 0 totalpages: 4144358
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 722841 pages, LIFO batch:31
[ 0.000000] Normal zone: 53144 pages used for memmap
[ 0.000000] Normal zone: 3348072 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: X2APIC (apic_id[0x00] uid[0x01] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x02] uid[0x02] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x04] uid[0x03] enabled)
[ 0.000000] ACPI: X2APIC (apic_id[0x06] uid[0x04] enabled)
[ 0.000000] ACPI: X2APIC_NMI (uid[0xffffffff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000b59c5000 - 00000000b5a0d000
[ 0.000000] PM: Registered nosave memory: 00000000b5a0d000 - 00000000b5b3b000
[ 0.000000] PM: Registered nosave memory: 00000000b5b3b000 - 00000000b5b43000
[ 0.000000] PM: Registered nosave memory: 00000000b5b43000 - 00000000b6baa000
[ 0.000000] PM: Registered nosave memory: 00000000b6baa000 - 00000000b6bc9000
[ 0.000000] PM: Registered nosave memory: 00000000b6bc9000 - 00000000b6bf2000
[ 0.000000] PM: Registered nosave memory: 00000000b6bf2000 - 00000000b6c35000
[ 0.000000] PM: Registered nosave memory: 00000000b6dbd000 - 00000000b6ff4000
[ 0.000000] PM: Registered nosave memory: 00000000b7000000 - 00000000b7800000
[ 0.000000] PM: Registered nosave memory: 00000000b7800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043e200000 s83392 r8192 d23104 u524288
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4074825
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.4.7 root=/dev/mapper/vg_fuj2-root ro pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16066684k/17799168k available (6541k kernel code, 1221736k absent, 510748k reserved, 6617k data, 908k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 66584576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3292.542 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.08 BogoMIPS (lpj=13170168)
[ 0.000093] pid_max: default: 32768 minimum: 301
[ 0.000260] Security Framework initialized
[ 0.000307] AppArmor: AppArmor initialized
[ 0.001074] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003511] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004602] Mount-cache hash table entries: 256
[ 0.004759] Initializing cgroup subsys cpuacct
[ 0.004800] Initializing cgroup subsys memory
[ 0.004845] Initializing cgroup subsys devices
[ 0.004887] Initializing cgroup subsys freezer
[ 0.004925] Initializing cgroup subsys blkio
[ 0.004965] Initializing cgroup subsys perf_event
[ 0.005020] CPU: Physical Processor ID: 0
[ 0.005057] CPU: Processor Core ID: 0
[ 0.005097] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.005098] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005179] mce: CPU supports 9 MCE banks
[ 0.005226] CPU0: Thermal monitoring enabled (TM1)
[ 0.005271] using mwait in idle threads.
[ 0.007112] ACPI: Core revision 20120320
[ 0.020096] ftrace: allocating 24505 entries in 96 pages
[ 0.030265] DMAR: Host address width 36
[ 0.030302] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.030346] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.030397] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.030437] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.030488] DMAR: RMRR base: 0x000000b6b56000 end: 0x000000b6b71fff
[ 0.030527] DMAR: RMRR base: 0x000000b7800000 end: 0x000000bf9fffff
[ 0.030635] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.030673] HPET id 0 under DRHD base 0xfed91000
[ 0.030709] HPET id 0 under DRHD base 0xfed91000
[ 0.030746] HPET id 0 under DRHD base 0xfed91000
[ 0.030782] HPET id 0 under DRHD base 0xfed91000
[ 0.030818] HPET id 0 under DRHD base 0xfed91000
[ 0.030855] HPET id 0 under DRHD base 0xfed91000
[ 0.030891] HPET id 0 under DRHD base 0xfed91000
[ 0.030927] HPET id 0 under DRHD base 0xfed91000
[ 0.031115] Enabled IRQ remapping in x2apic mode
[ 0.031544] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071264] CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
[ 0.176079] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.176209] PEBS disabled due to CPU errata.
[ 0.176246] ... version: 3
[ 0.176281] ... bit width: 48
[ 0.176317] ... generic registers: 8
[ 0.176352] ... value mask: 0000ffffffffffff
[ 0.176390] ... max period: 000000007fffffff
[ 0.176426] ... fixed-purpose events: 3
[ 0.176462] ... event mask: 00000007000000ff
[ 0.176588] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.176681] Booting Node 0, Processors #1
[ 0.189776] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.189903] #2
[ 0.202964] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.203088] #3 Ok.
[ 0.216164] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.216226] Brought up 4 CPUs
[ 0.216260] Total of 4 processors activated (26340.33 BogoMIPS).
[ 0.218655] devtmpfs: initialized
[ 0.219816] EVM: security.selinux
[ 0.219851] EVM: security.SMACK64
[ 0.219885] EVM: security.capability
[ 0.219942] PM: Registering ACPI NVS region [mem 0xb59c5000-0xb5a0cfff] (294912 bytes)
[ 0.219997] PM: Registering ACPI NVS region [mem 0xb6baa000-0xb6bc8fff] (126976 bytes)
[ 0.220051] PM: Registering ACPI NVS region [mem 0xb6bf2000-0xb6c34fff] (274432 bytes)
[ 0.220592] dummy:
[ 0.220650] RTC time: 10:30:22, date: 12/13/12
[ 0.220706] NET: Registered protocol family 16
[ 0.220819] ACPI: bus type pci registered
[ 0.220891] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.220946] PCI: not using MMCONFIG
[ 0.220980] PCI: Using configuration type 1 for base access
[ 0.221651] bio: create slab <bio-0> at 0
[ 0.221734] ACPI: Added _OSI(Module Device)
[ 0.221772] ACPI: Added _OSI(Processor Device)
[ 0.221808] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.221844] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.222597] ACPI: EC: Look up EC in DSDT
[ 0.223419] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.225208] ACPI: Interpreter enabled
[ 0.225244] ACPI: (supports S0 S3 S4 S5)
[ 0.225363] ACPI: Using IOAPIC for interrupt routing
[ 0.225411] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.225510] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.267186] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.269896] ACPI: No dock devices found.
[ 0.269933] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270121] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.270277] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 0.270317] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
[ 0.270356] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
[ 0.270395] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xf0df]
[ 0.270435] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.270485] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.270536] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfe529fff]
[ 0.270603] PCI host bridge to bus 0000:00
[ 0.270639] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.270678] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.270716] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.270755] pci_bus 0000:00: root bus resource [io 0x0d00-0xf0df]
[ 0.270794] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.270835] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.270874] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfe529fff]
[ 0.270919] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.270948] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.270956] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.270960] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.270964] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.271009] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.271030] pci 0000:00:16.0: reg 10: [mem 0xfe529000-0xfe52900f 64bit]
[ 0.271101] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.271129] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.271145] pci 0000:00:19.0: reg 10: [mem 0xfe500000-0xfe51ffff]
[ 0.271153] pci 0000:00:19.0: reg 14: [mem 0xfe528000-0xfe528fff]
[ 0.271161] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f]
[ 0.271219] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.271242] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.271261] pci 0000:00:1a.0: reg 10: [mem 0xfe527000-0xfe5273ff]
[ 0.271345] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.271371] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.271384] pci 0000:00:1b.0: reg 10: [mem 0xfe520000-0xfe523fff 64bit]
[ 0.271447] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271473] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.271602] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271638] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.271710] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.271740] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.271759] pci 0000:00:1d.0: reg 10: [mem 0xfe526000-0xfe5263ff]
[ 0.271844] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.271863] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.271921] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
[ 0.272038] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.272054] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
[ 0.272061] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
[ 0.272068] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
[ 0.272075] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
[ 0.272083] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.272090] pci 0000:00:1f.2: reg 24: [mem 0xfe525000-0xfe5257ff]
[ 0.272131] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.272147] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.272161] pci 0000:00:1f.3: reg 10: [mem 0xfe524000-0xfe5240ff 64bit]
[ 0.272180] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.272273] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.272394] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.272422] pci 0000:02:00.0: reg 10: [mem 0xfe400000-0xfe401fff 64bit]
[ 0.272561] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.281781] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.281838] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.281898] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.281946] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.281947] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.281948] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.281950] pci 0000:00:1e.0: bridge window [io 0x0d00-0xf0df] (subtractive decode)
[ 0.281951] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.281952] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.281954] pci 0000:00:1e.0: bridge window [mem 0xbfa00000-0xfe529fff] (subtractive decode)
[ 0.281972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.282028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.282046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.282068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.282138] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.282291] pci0000:00: ACPI _OSC control (0x1c) granted
[ 0.284367] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.284659] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.284947] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.285217] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.285487] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.285779] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.286097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.286386] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.286700] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.286754] vgaarb: loaded
[ 0.286787] vgaarb: bridge control possible 0000:00:02.0
[ 0.286876] i2c-core: driver [tps65090] using legacy suspend method
[ 0.286915] i2c-core: driver [tps65090] using legacy resume method
[ 0.286989] SCSI subsystem initialized
[ 0.287041] libata version 3.00 loaded.
[ 0.287061] usbcore: registered new interface driver usbfs
[ 0.287105] usbcore: registered new interface driver hub
[ 0.287153] usbcore: registered new device driver usb
[ 0.287228] PCI: Using ACPI for IRQ routing
[ 0.293255] PCI: pci_cache_line_size set to 64 bytes
[ 0.293302] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.293304] reserve RAM buffer: 00000000b59c5000 - 00000000b7ffffff
[ 0.293306] reserve RAM buffer: 00000000b6dbd000 - 00000000b7ffffff
[ 0.293307] reserve RAM buffer: 00000000b7000000 - 00000000b7ffffff
[ 0.293309] reserve RAM buffer: 000000043e600000 - 000000043fffffff
[ 0.293359] NetLabel: Initializing
[ 0.293394] NetLabel: domain hash size = 128
[ 0.293430] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.293472] NetLabel: unlabeled traffic allowed by default
[ 0.293539] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.293748] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.296798] Switching to clocksource hpet
[ 0.300523] AppArmor: AppArmor Filesystem Enabled
[ 0.301044] pnp: PnP ACPI init
[ 0.301086] ACPI: bus type pnp registered
[ 0.301215] pnp 00:00: [bus 00-ff]
[ 0.301217] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.301218] pnp 00:00: [io 0x0000-0x03af window]
[ 0.301220] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.301221] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.301222] pnp 00:00: [io 0x0d00-0xf0df window]
[ 0.301223] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.301225] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.301226] pnp 00:00: [mem 0xbfa00000-0xfe529fff window]
[ 0.301227] pnp 00:00: [mem 0x00000000 window]
[ 0.301262] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.301294] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.301295] pnp 00:01: [mem 0xfeb00000-0xfebfffff]
[ 0.301296] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.301298] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.301300] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.301301] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.301320] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.301360] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 0.301399] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.301439] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.301478] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.301518] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.301558] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.301628] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.301630] pnp 00:02: [io 0x0600-0x063f]
[ 0.301630] pnp 00:02: [io 0x0640-0x064f]
[ 0.301632] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.301648] system 00:02: [io 0x0600-0x063f] has been reserved
[ 0.301687] system 00:02: [io 0x0640-0x064f] has been reserved
[ 0.301726] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.301740] pnp 00:03: [io 0x0060]
[ 0.301741] pnp 00:03: [io 0x0064]
[ 0.301751] pnp 00:03: [irq 1]
[ 0.301761] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.302194] pnp 00:04: [io 0x03f8-0x03ff]
[ 0.302199] pnp 00:04: [irq 4]
[ 0.302231] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.302304] pnp 00:05: [dma 4]
[ 0.302305] pnp 00:05: [io 0x0000-0x000f]
[ 0.302306] pnp 00:05: [io 0x0081-0x0083]
[ 0.302307] pnp 00:05: [io 0x0087]
[ 0.302308] pnp 00:05: [io 0x0089-0x008b]
[ 0.302309] pnp 00:05: [io 0x008f]
[ 0.302310] pnp 00:05: [io 0x00c0-0x00df]
[ 0.302320] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.302326] pnp 00:06: [io 0x0070-0x0071]
[ 0.302331] pnp 00:06: [irq 8]
[ 0.302342] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.302346] pnp 00:07: [io 0x0061]
[ 0.302356] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.302369] pnp 00:08: [io 0x0010-0x001f]
[ 0.302370] pnp 00:08: [io 0x0022-0x003f]
[ 0.302371] pnp 00:08: [io 0x0044-0x005f]
[ 0.302372] pnp 00:08: [io 0x0062-0x0063]
[ 0.302373] pnp 00:08: [io 0x0065-0x006f]
[ 0.302375] pnp 00:08: [io 0x0072-0x007f]
[ 0.302376] pnp 00:08: [io 0x0080]
[ 0.302377] pnp 00:08: [io 0x0084-0x0086]
[ 0.302378] pnp 00:08: [io 0x0088]
[ 0.302379] pnp 00:08: [io 0x008c-0x008e]
[ 0.302380] pnp 00:08: [io 0x0090-0x009f]
[ 0.302381] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.302382] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.302383] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.302401] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.302440] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.302445] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.302450] pnp 00:09: [irq 13]
[ 0.302461] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.302478] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.302489] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.302581] pnp 00:0b: [io 0x0400-0x0453]
[ 0.302583] pnp 00:0b: [io 0x0458-0x047f]
[ 0.302584] pnp 00:0b: [io 0x1180-0x119f]
[ 0.302585] pnp 00:0b: [io 0x0500-0x057f]
[ 0.302586] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 0.302587] pnp 00:0b: [mem 0xfec00000-0xfecfffff]
[ 0.302588] pnp 00:0b: [mem 0xfed08000-0xfed08fff]
[ 0.302589] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 0.302608] system 00:0b: [io 0x0400-0x0453] has been reserved
[ 0.302647] system 00:0b: [io 0x0458-0x047f] has been reserved
[ 0.302685] system 00:0b: [io 0x1180-0x119f] has been reserved
[ 0.302724] system 00:0b: [io 0x0500-0x057f] has been reserved
[ 0.302762] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.302802] system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.302843] system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.302882] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 0.302922] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.302944] pnp 00:0c: [io 0x0454-0x0457]
[ 0.302960] system 00:0c: [io 0x0454-0x0457] has been reserved
[ 0.302999] system 00:0c: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.303075] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.303094] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.303191] pnp: PnP ACPI: found 14 devices
[ 0.303227] ACPI: ACPI bus type pnp unregistered
[ 0.309026] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.309080] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.309120] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.309166] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.309231] pci 0000:00:1e.0: setting latency timer to 64
[ 0.309234] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.309236] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.309237] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.309238] pci_bus 0000:00: resource 7 [io 0x0d00-0xf0df]
[ 0.309239] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.309241] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.309242] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xfe529fff]
[ 0.309244] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.309245] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.309246] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.309247] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.309249] pci_bus 0000:03: resource 7 [io 0x0d00-0xf0df]
[ 0.309250] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.309251] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.309252] pci_bus 0000:03: resource 10 [mem 0xbfa00000-0xfe529fff]
[ 0.309276] NET: Registered protocol family 2
[ 0.309510] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.310152] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.311169] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.311327] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.311366] TCP: reno registered
[ 0.311413] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.311493] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.311609] NET: Registered protocol family 1
[ 0.312733] pci 0000:00:02.0: Boot video device
[ 0.352923] PCI: CLS 64 bytes, default 64
[ 0.352953] Trying to unpack rootfs image as initramfs...
[ 2.430844] Freeing initrd memory: 168276k freed
[ 2.445253] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.445296] Placing 64MB software IO TLB between ffff8800b19c5000 - ffff8800b59c5000
[ 2.445347] software IO TLB at phys 0xb19c5000 - 0xb59c5000
[ 2.445733] audit: initializing netlink socket (disabled)
[ 2.445777] type=2000 audit(1355394624.336:1): initialized
[ 2.460067] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.461573] VFS: Disk quotas dquot_6.5.2
[ 2.461631] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.461922] fuse init (API version 7.18)
[ 2.462003] msgmni has been set to 31708
[ 2.462263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.462332] io scheduler noop registered
[ 2.462368] io scheduler deadline registered (default)
[ 2.462429] io scheduler cfq registered
[ 2.462584] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 2.462704] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 2.462772] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.462817] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.462827] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 2.462867] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.462909] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 2.462917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.462964] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.463028] intel_idle: MWAIT substates: 0x1120
[ 2.463028] intel_idle: v0.4 model 0x2A
[ 2.463029] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.463076] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.463130] ACPI: Power Button [PWRB]
[ 2.463187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.463239] ACPI: Power Button [PWRF]
[ 2.465121] GHES: HEST is not enabled!
[ 2.465204] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.485850] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.507127] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.507317] Linux agpgart interface v0.103
[ 2.507385] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 2.507525] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.508448] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 2.508572] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.509365] brd: module loaded
[ 2.509767] loop: module loaded
[ 2.509865] ahci 0000:00:1f.2: version 3.0
[ 2.509913] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 2.524812] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
[ 2.524878] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 2.524932] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.549049] scsi0 : ahci
[ 2.549128] scsi1 : ahci
[ 2.549197] scsi2 : ahci
[ 2.549271] scsi3 : ahci
[ 2.549340] scsi4 : ahci
[ 2.549410] scsi5 : ahci
[ 2.549520] ata1: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525100 irq 44
[ 2.549571] ata2: DUMMY
[ 2.549604] ata3: DUMMY
[ 2.549638] ata4: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525280 irq 44
[ 2.549689] ata5: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525300 irq 44
[ 2.549741] ata6: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525380 irq 44
[ 2.549941] Fixed MDIO Bus: probed
[ 2.549998] tun: Universal TUN/TAP device driver, 1.6
[ 2.550035] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.550099] PPP generic driver version 2.4.2
[ 2.550167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.550225] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.550228] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.550280] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.550349] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.554272] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.554281] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe527000
[ 2.564789] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.564864] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.564904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.564955] usb usb1: Product: EHCI Host Controller
[ 2.564992] usb usb1: Manufacturer: Linux 3.4.7 ehci_hcd
[ 2.565029] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.565120] hub 1-0:1.0: USB hub found
[ 2.565156] hub 1-0:1.0: 2 ports detected
[ 2.565253] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.565256] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.565296] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.565364] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.569285] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.569293] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe526000
[ 2.580786] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.580855] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.580895] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.580946] usb usb2: Product: EHCI Host Controller
[ 2.580983] usb usb2: Manufacturer: Linux 3.4.7 ehci_hcd
[ 2.581020] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.581102] hub 2-0:1.0: USB hub found
[ 2.581138] hub 2-0:1.0: 2 ports detected
[ 2.581219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.581266] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.581336] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.581376] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 2.581607] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfe400000
[ 2.581700] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.581704] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.581708] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 2.581712] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 2.581716] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 2.581823] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.581863] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.581914] usb usb3: Product: xHCI Host Controller
[ 2.581951] usb usb3: Manufacturer: Linux 3.4.7 xhci_hcd
[ 2.581989] usb usb3: SerialNumber: 0000:02:00.0
[ 2.582058] xHCI xhci_add_endpoint called for root hub
[ 2.582059] xHCI xhci_check_bandwidth called for root hub
[ 2.582071] hub 3-0:1.0: USB hub found
[ 2.582113] hub 3-0:1.0: 2 ports detected
[ 2.582198] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.582237] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 2.584926] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.584968] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.585028] usb usb4: Product: xHCI Host Controller
[ 2.585065] usb usb4: Manufacturer: Linux 3.4.7 xhci_hcd
[ 2.585106] usb usb4: SerialNumber: 0000:02:00.0
[ 2.585181] xHCI xhci_add_endpoint called for root hub
[ 2.585182] xHCI xhci_check_bandwidth called for root hub
[ 2.585193] hub 4-0:1.0: USB hub found
[ 2.585242] hub 4-0:1.0: 2 ports detected
[ 2.585396] usbcore: registered new interface driver libusual
[ 2.585459] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.585504] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.586250] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.586348] mousedev: PS/2 mouse device common for all mice
[ 2.586475] rtc_cmos 00:06: RTC can wake from S4
[ 2.586674] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.586758] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.586844] device-mapper: uevent: version 1.0.3
[ 2.586924] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.587020] cpuidle: using governor ladder
[ 2.587106] cpuidle: using governor menu
[ 2.587146] EFI Variables Facility v0.08 2004-May-17
[ 2.587308] ashmem: initialized
[ 2.587398] TCP: cubic registered
[ 2.587494] NET: Registered protocol family 10
[ 2.587656] NET: Registered protocol family 17
[ 2.587698] Registering the dns_resolver key type
[ 2.587887] PM: Hibernation image not present or could not be loaded.
[ 2.587894] registered taskstats version 1
[ 2.593645] Magic number: 8:550:527
[ 2.593804] rtc_cmos 00:06: setting system clock to 2012-12-13 10:30:24 UTC (1355394624)
[ 2.594341] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.594385] EDD information not available.
[ 2.607393] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.868822] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.868901] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.868978] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.869757] ata4.00: ATA-8: ST1000DM003-9YN162, CC4D, max UDMA/133
[ 2.869815] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.870629] ata4.00: configured for UDMA/133
[ 2.870982] ata5.00: ATAPI: TSSTcorpDVD-ROM TS-H353C, FS02, max UDMA/100
[ 2.873656] ata5.00: configured for UDMA/100
[ 2.876828] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.876835] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.877062] ata1.00: ATA-8: TOSHIBA THNSFC128GBSJ, CJFA0203, max UDMA/100
[ 2.877106] ata1.00: 250069680 sectors, multi 16: LBA48
[ 2.877398] ata1.00: configured for UDMA/100
[ 2.877606] scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSFC12 CJFA PQ: 0 ANSI: 5
[ 2.877782] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.877825] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.878114] sd 0:0:0:0: [sda] Write Protect is off
[ 2.878118] scsi 3:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC4D PQ: 0 ANSI: 5
[ 2.878220] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.878221] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 2.878227] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.878390] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.878392] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.878466] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.878542] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.878637] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.879029] scsi 4:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353C FS02 PQ: 0 ANSI: 5
[ 2.880749] sda: unknown partition table
[ 2.881149] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.881392] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 2.881453] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.881552] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.881601] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 2.890995] sdb: sdb1 sdb2 sdb3 sdb4
[ 2.891830] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.892905] Freeing unused kernel memory: 908k freed
[ 2.893023] Write protecting the kernel read-only data: 12288k
[ 2.896135] Freeing unused kernel memory: 1632k freed
[ 2.898536] Freeing unused kernel memory: 1212k freed
[ 2.910578] udevd[111]: starting version 175
[ 2.922748] e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
[ 2.922795] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 2.922881] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.922955] e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.923049] e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
[ 2.927698] [drm] Initialized drm 1.1.0 20060810
[ 3.009230] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.009289] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.009486] hub 1-1:1.0: USB hub found
[ 3.009597] hub 1-1:1.0: 6 ports detected
[ 3.120775] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.174034] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:19:99:dd:74:c3
[ 3.174093] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.174177] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 3.174472] i915 0000:00:02.0: setting latency timer to 64
[ 3.223047] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 3.223104] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.223260] i915 0000:00:02.0: irq 51 for MSI/MSI-X
[ 3.223266] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.223311] [drm] Driver supports precise vblank timestamp query.
[ 3.223370] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.253345] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.253408] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.253603] hub 2-1:1.0: USB hub found
[ 3.253708] hub 2-1:1.0: 8 ports detected
[ 3.275001] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 3.444763] Refined TSC clocksource calibration: 3292.520 MHz.
[ 3.444822] Switching to clocksource tsc
[ 3.524860] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
[ 3.622199] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c03f
[ 3.622259] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.622327] usb 2-1.1: Product: USB-PS/2 Optical Mouse
[ 3.622376] usb 2-1.1: Manufacturer: Logitech
[ 3.627512] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
[ 3.627709] generic-usb 0003:046D:C03F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 3.627799] usbcore: registered new interface driver usbhid
[ 3.627852] usbhid: USB HID core driver
[ 3.692822] usb 2-1.2: new full-speed USB device number 4 using ehci_hcd
[ 3.732006] fbcon: inteldrmfb (fb0) is primary device
[ 3.791198] usb 2-1.2: New USB device found, idVendor=08e6, idProduct=3437
[ 3.791202] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.791204] usb 2-1.2: Product: USB SmartCard Reader
[ 3.791206] usb 2-1.2: Manufacturer: Gemplus
[ 3.860821] usb 2-1.8: new low-speed USB device number 5 using ehci_hcd
[ 3.973440] usb 2-1.8: New USB device found, idVendor=045e, idProduct=00db
[ 3.973444] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.973447] usb 2-1.8: Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
[ 3.973449] usb 2-1.8: Manufacturer: Microsoft
[ 3.982685] input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input4
[ 3.982789] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.8/input0
[ 3.993787] input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input5
[ 3.993885] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.8/input1
[ 4.076411] Console: switching to colour frame buffer device 240x75
[ 4.081208] fb0: inteldrmfb frame buffer device
[ 4.081208] drm: registered panic notifier
[ 4.081248] No ACPI video bus found
[ 4.081282] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.839789] md: linear personality registered for level -1
[ 4.840903] md: multipath personality registered for level -4
[ 4.842052] md: raid0 personality registered for level 0
[ 4.843309] md: raid1 personality registered for level 1
[ 4.844268] async_tx: api initialized (async)
[ 4.912719] raid6: int64x1 3197 MB/s
[ 4.980712] raid6: int64x2 3815 MB/s
[ 5.048726] raid6: int64x4 3238 MB/s
[ 5.116710] raid6: int64x8 2907 MB/s
[ 5.184711] raid6: sse2x1 8876 MB/s
[ 5.252707] raid6: sse2x2 10927 MB/s
[ 5.320702] raid6: sse2x4 12613 MB/s
[ 5.320713] raid6: using algorithm sse2x4 (12613 MB/s)
[ 5.321339] xor: automatically using best checksumming function: generic_sse
[ 5.340701] generic_sse: 14742.000 MB/sec
[ 5.340715] xor: using function: generic_sse (14742.000 MB/sec)
[ 5.341810] md: raid6 personality registered for level 6
[ 5.341828] md: raid5 personality registered for level 5
[ 5.341845] md: raid4 personality registered for level 4
[ 5.345128] md: raid10 personality registered for level 10
[ 5.362480] Btrfs loaded
[ 5.514584] device fsid f65ce36e-5e3e-4792-b640-64f9ae17aa6e devid 1 transid 104 /dev/dm-2
[ 5.955826] device fsid f65ce36e-5e3e-4792-b640-64f9ae17aa6e devid 1 transid 104 /dev/mapper/vg_fuj2-root
[ 5.956225] btrfs: disk space caching is enabled
[ 6.800855] init: ureadahead main process (395) terminated with status 5
[ 7.023120] btrfs: use lzo compression
[ 7.023139] btrfs: enabling inode map caching
[ 7.023154] btrfs: max_inline at 32768
[ 7.023166] btrfs: disk space caching is enabled
[ 7.259208] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.386312] EXT4-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
[ 7.386871] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.483961] udevd[524]: starting version 175
[ 7.625514] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 7.646983] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x26
[ 7.648127] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x26
[ 7.648834] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x26
[ 7.649500] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x26
[ 7.650305] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.665006] WARNING! power/level is deprecated; use power/control instead
[ 7.746189] RPC: Registered named UNIX socket transport module.
[ 7.746191] RPC: Registered udp transport module.
[ 7.746192] RPC: Registered tcp transport module.
[ 7.746193] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.746703] sch5636: Found theseus chip at 0x640, revison: 1.24
[ 7.754620] sch56xx_common: Registered /dev/watchdog chardev major 10, minor: 130
[ 7.829597] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.829806] mei 0000:00:16.0: setting latency timer to 64
[ 7.829861] mei 0000:00:16.0: irq 52 for MSI/MSI-X
[ 7.831816] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
[ 7.831867] watchdog: error registering /dev/watchdog (err=-16)
[ 7.831895] mei 0000:00:16.0: unable to register watchdog device.
[ 7.859933] device-mapper: multipath: version 1.3.0 loaded
[ 8.105650] FS-Cache: Loaded
[ 8.217682] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[ 8.273816] NFS: Registering the id_resolver key type
[ 8.273828] FS-Cache: Netfs 'nfs' registered for caching
[ 8.280216] hda_codec: CX20642: BIOS auto-probing.
[ 8.283492] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.283554] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.283595] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.283633] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.283676] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.472395] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.578839] lp: driver loaded but no devices found
[ 8.585223] Bluetooth: Core ver 2.16
[ 8.585236] NET: Registered protocol family 31
[ 8.585237] Bluetooth: HCI device and connection manager initialized
[ 8.585239] Bluetooth: HCI socket layer initialized
[ 8.585240] Bluetooth: L2CAP socket layer initialized
[ 8.585243] Bluetooth: SCO socket layer initialized
[ 8.590887] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.590889] Bluetooth: BNEP filters: protocol multicast
[ 8.591460] ppdev: user-space parallel port driver
[ 8.611219] Bluetooth: RFCOMM TTY layer initialized
[ 8.611223] Bluetooth: RFCOMM socket layer initialized
[ 8.611224] Bluetooth: RFCOMM ver 1.11
[ 8.767792] init: statd-mounting (/scratch) main process (462) killed by TERM signal
[ 8.767941] init: statd-mounting (/chroots) main process (469) killed by TERM signal
[ 8.768048] init: statd-mounting (/home/breuner) main process (485) killed by TERM signal
[ 8.768179] init: statd-mounting (/home/schubert) main process (466) killed by TERM signal
[ 8.842127] init: idmapd-mounting (/chroots) main process (468) killed by TERM signal
[ 8.842277] init: idmapd-mounting (/scratch) main process (461) killed by TERM signal
[ 8.842393] init: idmapd-mounting (/home/schubert) main process (464) killed by TERM signal
[ 8.842507] init: idmapd-mounting (/home/breuner) main process (484) killed by TERM signal
[ 11.451198] ADDRCONF(NETDEV_UP): tap0: link is not ready
[ 11.660352] Bridge firewalling registered
[ 11.661384] device tap0 entered promiscuous mode
[ 11.676974] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 128.309145] init: wait-for-state (ypbindypserv) main process (3030) killed by TERM signal
[ 128.598416] init: kdm main process (3121) killed by TERM signal
[ 128.612535] init: lightdm main process (3157) killed by TERM signal
[ 128.962041] CacheFiles: Loaded
[ 129.409944] FS-Cache: Cache "mycache" added (type cachefiles)
[ 129.409946] CacheFiles: File cache on dm-0 registered
[ 129.891948] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 129.891956] NFSD: starting 90-second grace period
[ 135.216402] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 135.256449] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 135.448877] init: plymouth-stop pre-start process (3925) terminated with status 1
[ 216.314930] e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
[ 216.416370] e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
[ 216.417223] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 220.086345] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 220.087137] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 230.344643] eth0: no IPv6 routers present
[ 248.134735] init: tty1 main process ended, respawning
[ 501.909150] e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
[ 502.010353] e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
[ 502.011240] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 504.944249] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 504.945049] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 515.382352] eth0: no IPv6 routers present
[ 799.159906] usb 2-1.4: new high-speed USB device number 6 using ehci_hcd
[ 799.264930] usb 2-1.4: New USB device found, idVendor=18d1, idProduct=0ff9
[ 799.264934] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 799.264937] usb 2-1.4: Product: Android Phone
[ 799.264940] usb 2-1.4: Manufacturer: HTC
[ 799.264942] usb 2-1.4: SerialNumber: HT99HL903346
[ 799.304148] usbcore: registered new interface driver uas
[ 799.310690] Initializing USB Mass Storage driver...
[ 799.310773] scsi6 : usb-storage 2-1.4:1.0
[ 799.310825] usbcore: registered new interface driver usb-storage
[ 799.310826] USB Mass Storage support registered.
[ 800.311875] scsi 6:0:0:0: Direct-Access HTC Hero 0100 PQ: 0 ANSI: 2
[ 800.312671] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 800.325189] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 843.849525] sd 6:0:0:0: [sdc] 15661056 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 843.853620] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 843.874467] sdc: sdc1 sdc2 sdc3
[ 1171.132940] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1171.158227] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1171.181582] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 1171.229657] QNX4 filesystem 0.2.3 registered.
[ 1171.955161] blockdev: sending ioctl 125d to a partition!
[ 1171.955164] blockdev: sending ioctl 125d to a partition!
[ 1171.958068] blockdev: sending ioctl 125d to a partition!
[ 1171.958070] blockdev: sending ioctl 125d to a partition!
[ 1172.011632] blockdev: sending ioctl 125d to a partition!
[ 1172.011635] blockdev: sending ioctl 125d to a partition!
[ 1172.014434] blockdev: sending ioctl 125d to a partition!
[ 1172.014436] blockdev: sending ioctl 125d to a partition!
next reply other threads:[~2012-12-13 12:16 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-13 12:16 Bernd Schubert [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-12-14 14:58 [regression] 3.7 ends in APIC panic Bernd Schubert
2012-12-16 11:35 ` Ingo Molnar
2012-12-16 15:33 ` Bernd Schubert
2012-12-16 17:43 ` Yinghai Lu
2012-12-16 17:45 ` Yinghai Lu
2012-12-16 18:01 ` Bernd Schubert
2012-12-16 18:07 ` Yinghai Lu
2012-12-16 18:28 ` Bernd Schubert
2012-12-16 19:13 ` Borislav Petkov
2012-12-16 19:46 ` Bernd Schubert
2012-12-16 20:39 ` Borislav Petkov
2012-12-17 9:34 ` Bernd Schubert
2012-12-17 10:00 ` Borislav Petkov
2012-12-17 13:11 ` Bernd Schubert
2012-12-17 9:27 ` Bernd Schubert
2012-12-17 14:02 ` Ingo Molnar
2012-12-17 16:53 ` Yinghai Lu
2012-12-17 16:56 ` H. Peter Anvin
2012-12-17 17:03 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='kacgv2$efh$1@ger.gmane.org' \
--to=bernd.schubert@itwm.fraunhofer.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.