From: Eric BOUXIROT <eric.bouxirot@azimut-monitoring.com>
To: ofono@ofono.org
Subject: Re: problem sim status
Date: Fri, 28 Mar 2014 18:27:08 +0100 [thread overview]
Message-ID: <lh4bcu$p02$1@ger.gmane.org> (raw)
In-Reply-To: <53348A7A.3040805@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2985 bytes --]
Denis Kenzior a écrit :
> Hi Eric,
>
>> ok, i will add this, but if i understand well, this is for +CPIN request
>> AFTER sending a PIN. (but i mean my modem need this too.)
>>
>> my problem is when modem is added throught dbus/ofono, ofono send somes
>> init commands and finaly i mean sim-manager send an +CPIN request to
>> know if SIM is locked or not... THIS request fail with CME error 14
>> because of too fast query.
>>
>
> Ah, its one of those modems that doesn't have a sim ready notification.
> In that case you probably need to run CPIN queries as part of the modem
> power-up procedure. See examples in plugins/zte.c and plugins/speedup.c
> (cfun_enable & sim_state_cb)
>
> Regards,
> -Denis
hi Denis,
is it normal that pre_sim function is called before ofono get modem
manufacturer and model ?
ofonod[406]: plugins/sierra.c:open_device() Modem /dev/ttyUSB2
ofonod[406]: Modem: > ATE0 &C0\r
ofonod[406]: Modem: < ATE0 &C0\r
ofonod[406]: Modem: < \r\nOK\r\n
ofonod[406]: Modem: > AT+CMEE=1\r
ofonod[406]: Modem: < \r\n+CREG: 2\r\n
ofonod[406]: Modem: < \r\n+CIEV: 2,1\r\n
ofonod[406]: Modem: < \r\n+CIEV: 4,1\r\n
ofonod[406]: Modem: < \r\nOK\r\n
ofonod[406]: Modem: > AT+CFUN=4\r
ofonod[406]: Modem: < \r\nOK\r\n
ofonod[406]: plugins/sierra.c:cfun_enable()
ofonod[406]: src/modem.c:get_modem_property() modem 0x12d290 property
Model
ofonod[406]: src/modem.c:modem_change_state() old state: 0, new state:
1
ofonod[406]: plugins/sierra.c:sierra_pre_sim() 0x12d290
ofonod[406]: src/modem.c:get_modem_property() modem 0x12d290 property
Model
ofonod[406]: plugins/sierra.c:sierra_pre_sim()
ofonod[406]: Modem: > AT+GCAP\r
ofonod[406]: src/sim.c:ofono_sim_add_state_watch() 0x12e628
ofonod[406]: src/sim.c:ofono_sim_add_state_watch() 0x12e628
ofonod[406]: src/sim.c:ofono_sim_add_state_watch() 0x12e628
ofonod[406]: Modem: < \r\nERROR\r\n
ofonod[406]: Modem: > AT+CRSM=192,12258,0,0,255\r
ofonod[406]: Modem: < \r\n+CME ERROR: 3\r\n
ofonod[406]: Modem: > AT+CGMI\r
ofonod[406]: Modem: < \r\nSierra Wireless, Incorporated\r\n\r\nOK\r\n
ofonod[406]: Modem: > AT+CGMM\r
ofonod[406]: Modem: < \r\nSL8083\r\n\r\nOK\r\n
ofonod[406]: Modem: > AT+CGMR\r
ofonod[406]: Modem: < \r\nS4_0_0_7AP R1384 CNSZXD00000155 2012/09/29
10:26:17\r\n\r\nOK\r\n
ofonod[406]: Modem: > AT+CGSN\r
ofonod[406]: Modem: < \r\n355131041136262\r\n\r\nOK\r\n
ofonod[406]: Modem: > AT+CRSM=192,28421,0,0,255\r
ofonod[406]: Modem: < \r\n+CIEV: 2,0\r\n\r\n+CIEV: 4,0\r\n\r\n+CREG:
0\r\n\r\n+CME ERROR: 3\r\n
ofonod[406]: Modem: > AT+CRSM=192,12037,0,0,255\r
ofonod[406]: Modem: < \r\n+CME ERROR: 3\r\n
ofonod[406]: Modem: > AT+CPIN?\r
ofonod[406]: Modem: < \r\n+CME ERROR: 14\r\n
ofonod[406]: Querying PIN authentication state failed
i would like to get model in presim to make a better patch using modem
model with a new enum in vendor list (like simcom)
how i can make pre_sim to wait for theses information available ?
next prev parent reply other threads:[~2014-03-28 17:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-27 18:55 problem sim status Eric BOUXIROT
2014-03-27 20:05 ` Denis Kenzior
2014-03-27 20:21 ` Eric BOUXIROT
2014-03-27 20:30 ` Denis Kenzior
2014-03-27 21:34 ` Eric BOUXIROT
2014-03-27 22:14 ` Eric BOUXIROT
2014-03-28 17:27 ` Eric BOUXIROT [this message]
2014-03-28 17:31 ` Eric BOUXIROT
2014-03-28 20:54 ` Denis Kenzior
2014-03-29 13:35 ` Eric BOUXIROT
2014-03-31 15:30 ` Denis Kenzior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='lh4bcu$p02$1@ger.gmane.org' \
--to=eric.bouxirot@azimut-monitoring.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.