From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Subject: Re: Possible BUG in Linux's Promise TX4 drivers Date: Thu, 21 Jun 2007 03:04:10 +0000 (UTC) Message-ID: References: <4679E489.2020205@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from main.gmane.org ([80.91.229.2]:43828 "EHLO ciao.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751370AbXFUDEh (ORCPT ); Wed, 20 Jun 2007 23:04:37 -0400 Received: from list by ciao.gmane.org with local (Exim 4.43) id 1I1CyB-00075n-G5 for linux-ide@vger.kernel.org; Thu, 21 Jun 2007 05:04:27 +0200 Received: from ip68-108-205-250.ph.ph.cox.net ([68.108.205.250]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 21 Jun 2007 05:04:27 +0200 Received: from mark by ip68-108-205-250.ph.ph.cox.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 21 Jun 2007 05:04:27 +0200 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Gabriele Tozzi gmail.com> writes: > > Hello, > > I got a Promise TX4 SATA 300 Controller with 3 SAMSUNG HD400LJ SATA 300 > disks (sdc, sdd, sde), the disks runs under a software raid5 with Luks > (Cryptography layer) and Lvm2. > > The disks works well and there is no data loss, but i'm continuously and > always getting worrisome error messages and poor performance (with brief > system jams) when i perform writing operations to disks. Reading data > works well and seems to give no error messages. > > I've checked cables and power supply and i've tryied swapping > controller's pci slot and playing with bios irq setting. None of them > changed the results, so i'm assuming the presence of a kernel bug. I'm > sorry if i'm getting wrong and then wasting your time. > > My kernel version: > Linux version 2.6.21.5 (root transylvania) (gcc version 4.1.3 20070601 > (prerelease) (Debian 4.1.2-12)) #1 SMP Fri Jun 15 20:25:41 CEST 2007 > > This presumed bug was present on linux 2.60.20.7 too. > > On kernel 2.6.18.1 the bug was present, but with different error > messages, the messages were identical to those reported by another user > on this mail: http://lkml.org/lkml/2006/10/25/198 > > I got an Asus CUV4X-D motherboard with two PIII 800Mhz CPUS, this is my > home server :) > Everyone seems to be having problems with the Promise SATA300 TX4. I have an almost identical setup: SATA300 TX4 with 3 Samsung 400GB drives, and I get very similar errors. In 2.6.20 my card would soft restart all the way down to PIO mode and kill my performance. In 2.6.22-rc5 it will hard reset from 3.0 Gb/s to 1.5 Gb/s and operate relatively stable until heavy I/O. If anyone reading these threads (there have been quite a few in various places, see 'sata_promise error handling just a few hours ago) needs any additional information to help solve this problem, please let me know.