From: ken barnett <kbb@domain.hid>
To: xenomai@xenomai.org
Subject: [Xenomai-help] Unhandled irq 9
Date: Thu, 16 Oct 2008 13:40:11 +0000 (UTC) [thread overview]
Message-ID: <loom.20081016T133219-64@domain.hid> (raw)
In-Reply-To: 48F73A6D.7000607@domain.hid
Gilles Chanteperdrix <gilles.chanteperdrix <at> xenomai.org> writes:
>
> ken barnett wrote:
> > Hope you can help.
> >
> > My configuration is as follows:
> > PXA25xx ADS card w/ NO PCI bridge
> > Linux-2.6.24.5 kernel
> > Xenomai 2.4.5 stable
> >
> > The Xenomai port to the kernel is as follows:
> >
> > ./prepare-kernel.sh linux=../../linux-2.6.24.5
> > --adeos=adeos-ipipe-2.6.24-arm-1.9-00.patch
> > --adeos=adeos-ipipe-2.6.24-arm-1.9-01.patch --arch=arm
> >
> > ./xenomai-2.4.5/scripts/prepare-kernel.sh --linux=linux-2.6.24.5
> > --adeos=./xenomai-2.4.5/ksrc/arch/arm/patches/
> > adeos-ipipe-2.6.24-arm-1.9-01.patch
> >
> > I used 2 patches but have tried to use either/or with the
> > same indications.
> >
> > configure CC=arm-linux-gcc --enable-arm-eabi
> > --prefix=/home/dvdb-lite/rootfs/usr/xenomai --host=arm-linux
> > --enable-arm-arch=pxa
> >
> > See attached for the output log1.
> >
> > Step 1:
> > Looking at post from July 05, 2008 - 12:26: it states
to turn on full debug to
> > get the best output so that output file is attached
also as debug3.log
> >
> > Step 2
> > Then it stated to turn off Xenomai all together:
> > The log looks the same but is also attached as debug2.log
> >
> > Step 3
> > Turn off ipipe altogether
> > The kernel/card is back to working.
> >
> > Hop you can help,
>
> I am afraid you forgot attachments, or url to them.
>
Oops: There is nowhere to attach a file so I will add them inline
log1
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
pxa2xx_udc: version 30-June-2007
udc: disconnect from host
udc: is connected
ether gadget: using random self ethernet address
ether gadget: using random host ethernet address
usb0: Ethernet Gadget, version: May Day 2005
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk
usb0: MAC 06:6d:0a:58:17:f1
udc: connect to host
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
mice: PS/2 mouse device common for all mice
input: ADSmartIO AT keyboard as /class/input/input0
input: ADS784x touch screen as /class/input/input1
ts: ADS784x touchscreen initialized
i2c /dev entries driver
i2c-adapter i2c-0: registered adapter pxa2xx-i2c.0
rtc-ds1307 0-0068: ds1307 rtc found
rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc0
rtc-ds1307 0-0068: 56 bytes nvram
ltc1663 0-0020: ltc1663 dac found
SA1100/PXA2xx Watchdog Timer: timer margin 60 sec
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
pxamci: MMC/SD slot initialized
Unable to set MCI power
Unable to set MCI power
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.15
(Tue Nov 20 19:16:42
2007 UTC).
usbcore: registered new interface driver snd-usb-audio
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno@domain.hid>
XScale DSP coprocessor detected.
AC'97 0 access error (not audio or modem codec)
pxa2xx-ac97: probe of pxa2xx-ac97 failed with error -13
cpufreq: pxa255 cpu frequency driver initialized
cpufreq: changing pxa255 frequency to 398 Mhz, (SDRAM 196 Mhz)
mmc0: new SD card at address 0001
mmcblk0: mmc0:0001 SD2GB 2025984KiB
mmcblk0:
hda: SanDisk SDCFBI-256, CFA DISK drive
ide0 at 0xcaa80000-0xcaa80007,0xcaa8000e on irq 205
hda: max request size: 128KiB
hda: 501760 sectors (256 MB) w/1KiB Cache, CHS=980/16/32
hda:irq 9, desc: c0431354, depth: 0, count: 0, unhandled: 0
irq 9, desc: c0431354, depth: 0, count: 0, unhandled: 0
irq 9, desc: c0431354, depth: 0, count: 0, unhandled: 0
irq 9, desc: c0431354, depth: 0, count: 0, unhandled: 0
>From here it just continues!
debug2.log
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
pxa2xx_udc: version 30-June-2007
udc: disconnect from host
udc: is connected
ether gadget: using random self ethernet address
ether gadget: using random host ethernet address
usb0: Ethernet Gadget, version: May Day 2005
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk
usb0: MAC 36:0a:b7:83:e8:4d
udc: connect to host
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
mice: PS/2 mouse device common for all mice
input: ADSmartIO AT keyboard as /class/input/input0
input: ADS784x touch screen as /class/input/input1
ts: ADS784x touchscreen initialized
i2c /dev entries driver
i2c-adapter i2c-0: registered adapter pxa2xx-i2c.0
rtc-ds1307 0-0068: ds1307 rtc found
rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc0
rtc-ds1307 0-0068: 56 bytes nvram
ltc1663 0-0020: ltc1663 dac found
SA1100/PXA2xx Watchdog Timer: timer margin 60 sec
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
pxamci: MMC/SD slot initialized
Unable to set MCI power
Unable to set MCI power
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.15
(Tue Nov 20 19:16:42
2007 UTC).
usbcore: registered new interface driver snd-usb-audio
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno@domain.hid>
XScale DSP coprocessor detected.
AC'97 0 access error (not audio or modem codec)
pxa2xx-ac97: probe of pxa2xx-ac97 failed with error -13
cpufreq: pxa255 cpu frequency driver initialized
cpufreq: changing pxa255 frequency to 398 Mhz, (SDRAM 196 Mhz)
mmc0: new SD card at address 0001
mmcblk0: mmc0:0001 SD2GB 2025984KiB
mmcblk0:
hda: SanDisk SDCFBI-256, CFA DISK drive
ide0 at 0xcaa80000-0xcaa80007,0xcaa8000e on irq 205
hda: max request size: 128KiB
hda: 501760 sectors (256 MB) w/1KiB Cache, CHS=980/16/32
hda:irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0
irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0
irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0
irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0
irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0
irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0
irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0
irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0
irq 9, desc: c03ff2d4, depth: 0, count: 0, unhandled: 0
debug3.log
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
pxa2xx_udc: version 30-June-2007
udc: disconnect from host
udc: is connected
ether gadget: using random self ethernet address
ether gadget: using random host ethernet address
usb0: Ethernet Gadget, version: May Day 2005
usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk
usb0: MAC 26:cb:79:29:ff:48
udc: connect to host
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
mice: PS/2 mouse device common for all mice
input: ADSmartIO AT keyboard as /class/input/input0
input: ADS784x touch screen as /class/input/input1
ts: ADS784x touchscreen initialized
i2c /dev entries driver
i2c-adapter i2c-0: registered adapter pxa2xx-i2c.0
rtc-ds1307 0-0068: ds1307 rtc found
rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc0
rtc-ds1307 0-0068: 56 bytes nvram
ltc1663 0-0020: ltc1663 dac found
SA1100/PXA2xx Watchdog Timer: timer margin 60 sec
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
pxamci: MMC/SD slot initialized
Unable to set MCI power
Unable to set MCI power
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.15
(Tue Nov 20 19:16:42
2007 UTC).
usbcore: registered new interface driver snd-usb-audio
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno@domain.hid>
XScale DSP coprocessor detected.
mmc0: new SD card at address 0001
mmcblk0: mmc0:0001 SD2GB 2025984KiB
mmcblk0:<3>AC'97 0 access error (not audio or modem codec)
pxa2xx-ac97: probe of pxa2xx-ac97 failed with error -13
cpufreq: pxa255 cpu frequency driver initialized
cpufreq: changing pxa255 frequency to 398 Mhz, (SDRAM 196 Mhz)
hda: SanDisk SDCFBI-256, CFA DISK drive
ide0 at 0xcaa80000-0xcaa80007,0xcaa8000e on irq 205
hda: max request size: 128KiB
hda: 501760 sectors (256 MB) w/1KiB Cache, CHS=980/16/32
hda:irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
__ipipe_ack_bad_irq: unknown flow handler for IRQ 9
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
->handle_irq(): c003f020, ->chip(): c044f770, ->action(): 00000000
IRQ_NOPROBE set
IRQ_NOREQUEST set
irq 9, desc: c0455354, depth: 0, count: 0, unhandled: 0
next prev parent reply other threads:[~2008-10-16 13:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-16 12:52 [Xenomai-help] Need some help getting past an ken barnett
2008-10-16 12:58 ` Gilles Chanteperdrix
2008-10-16 13:40 ` ken barnett [this message]
2008-10-21 16:12 ` [Xenomai-help] Reducing Kernel Mode Interrupt Latency Henry Bausley
2008-10-21 16:19 ` Gilles Chanteperdrix
2008-10-21 16:22 ` Philippe Gerum
2008-10-21 21:00 ` Alexis Berlemont
2008-10-22 7:02 ` Wolfgang Grandegger
2008-10-27 15:08 ` Philippe Gerum
2008-10-28 23:15 ` Henry Bausley
2008-11-07 12:13 ` Philippe Gerum
2008-10-21 20:50 ` [Xenomai-help] Need some help getting past an Gilles Chanteperdrix
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20081016T133219-64@domain.hid \
--to=kbb@domain.hid \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.