From: Alan Cook <acook-osxm6dDZNBBZx8iatJs59jGjJy/sRE9J@public.gmane.org>
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: Unable to Connect Using Active Speed 2.5 Gbps and Active Width of 1
Date: Mon, 28 Mar 2011 19:07:34 +0000 (UTC) [thread overview]
Message-ID: <loom.20110328T210350-244@post.gmane.org> (raw)
In-Reply-To: 4D90D9A2.7000107@dev.mellanox.co.il
Hal Rosenstock <hal@...> writes:
>
> What does smpquery portinfo say for both sides of that link ?
>
What specifically would be I be looking for in this data to determine if their
is an issue?
For card 1 I have:
# Port info: DR path slid 65535; dlid 65535; 0 port 1
Mkey:............................0x0000000000000000
GidPrefix:.......................0xfe80000000000000
Lid:.............................2
SMLid:...........................1
CapMask:.........................0x2510868
IsTrapSupported
IsAutomaticMigrationSupported
IsSLMappingSupported
IsSystemImageGUIDsupported
IsCommunicatonManagementSupported
IsVendorClassSupported
IsCapabilityMaskNoticeSupported
IsClientRegistrationSupported
DiagCode:........................0x0000
MkeyLeasePeriod:.................0
LocalPort:.......................1
LinkWidthEnabled:................1X or 4X
LinkWidthSupported:..............1X or 4X
LinkWidthActive:.................1X
LinkSpeedSupported:..............2.5 Gbps or 5.0 Gbps or 10.0 Gbps
LinkState:.......................Active
PhysLinkState:...................LinkUp
LinkDownDefState:................Polling
ProtectBits:.....................0
LMC:.............................0
LinkSpeedActive:.................2.5 Gbps
LinkSpeedEnabled:................2.5 Gbps
NeighborMTU:.....................2048
SMSL:............................0
VLCap:...........................VL0-7
InitType:........................0x00
VLHighLimit:.....................4
VLArbHighCap:....................8
VLArbLowCap:.....................8
InitReply:.......................0x00
MtuCap:..........................2048
VLStallCount:....................0
HoqLife:.........................31
OperVLs:.........................VL0-7
PartEnforceInb:..................0
PartEnforceOutb:.................0
FilterRawInb:....................0
FilterRawOutb:...................0
MkeyViolations:..................0
PkeyViolations:..................0
QkeyViolations:..................0
GuidCap:.........................128
ClientReregister:................0
SubnetTimeout:...................18
RespTimeVal:.....................16
LocalPhysErr:....................8
OverrunErr:......................8
MaxCreditHint:...................0
RoundTrip:.......................0
For card 2 I have:
# Port info: DR path slid 65535; dlid 65535; 0 port 1
Mkey:............................0x0000000000000000
GidPrefix:.......................0xfe80000000000000
Lid:.............................1
SMLid:...........................1
CapMask:.........................0x251086a
IsSM
IsTrapSupported
IsAutomaticMigrationSupported
IsSLMappingSupported
IsSystemImageGUIDsupported
IsCommunicatonManagementSupported
IsVendorClassSupported
IsCapabilityMaskNoticeSupported
IsClientRegistrationSupported
DiagCode:........................0x0000
MkeyLeasePeriod:.................0
LocalPort:.......................1
LinkWidthEnabled:................1X or 4X
LinkWidthSupported:..............1X or 4X
LinkWidthActive:.................1X
LinkSpeedSupported:..............2.5 Gbps or 5.0 Gbps or 10.0 Gbps
LinkState:.......................Active
PhysLinkState:...................LinkUp
LinkDownDefState:................Polling
ProtectBits:.....................0
LMC:.............................0
LinkSpeedActive:.................2.5 Gbps
LinkSpeedEnabled:................2.5 Gbps
NeighborMTU:.....................2048
SMSL:............................0
VLCap:...........................VL0-7
InitType:........................0x00
VLHighLimit:.....................4
VLArbHighCap:....................8
VLArbLowCap:.....................8
InitReply:.......................0x00
MtuCap:..........................2048
VLStallCount:....................0
HoqLife:.........................31
OperVLs:.........................VL0-7
PartEnforceInb:..................0
PartEnforceOutb:.................0
FilterRawInb:....................0
FilterRawOutb:...................0
MkeyViolations:..................0
PkeyViolations:..................0
QkeyViolations:..................0
GuidCap:.........................128
ClientReregister:................0
SubnetTimeout:...................18
RespTimeVal:.....................16
LocalPhysErr:....................8
OverrunErr:......................8
MaxCreditHint:...................0
RoundTrip:.......................0
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-03-28 19:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-28 18:01 Unable to Connect Using Active Speed 2.5 Gbps and Active Width of 1 Alan Cook
[not found] ` <loom.20110328T194956-774-eS7Uydv5nfjZ+VzJOa5vwg@public.gmane.org>
2011-03-28 18:55 ` Hal Rosenstock
2011-03-28 19:07 ` Alan Cook [this message]
[not found] ` <loom.20110328T210350-244-eS7Uydv5nfjZ+VzJOa5vwg@public.gmane.org>
2011-03-28 19:19 ` Hal Rosenstock
2011-03-28 19:26 ` Alan Cook
[not found] ` <loom.20110328T212117-950-eS7Uydv5nfjZ+VzJOa5vwg@public.gmane.org>
2011-03-28 19:41 ` Jason Gunthorpe
2011-03-28 20:41 ` Alan Cook
[not found] ` <loom.20110328T220853-101-eS7Uydv5nfjZ+VzJOa5vwg@public.gmane.org>
2011-03-29 17:37 ` Hal Rosenstock
2011-03-29 18:01 ` Alan Cook
2011-03-28 20:18 ` Hal Rosenstock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20110328T210350-244@post.gmane.org \
--to=acook-osxm6ddznbbzx8iatjs59jgjjy/sre9j@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.