From mboxrd@z Thu Jan 1 00:00:00 1970 From: Antoine Caurier Date: Mon, 15 Oct 2012 08:55:00 +0000 (UTC) Subject: [Buildroot] BuildRoot not starting with Udev Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, I'm working on Buildroot-2012.08, with the at91sam9x5ek_defconfig. It work perfectly fine with the default configuration. But I have a problem when trying to activate udev. With menuconfig, I set /dev management (Dynamic using udev), and then rebuild the kernel and fs. All is starting fine, except for buildroot. The board stop to display anything just before the "Welcome to buildroot" prompt. Here are the last traces: UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 247603200 bytes (241800 KiB, 236 MiB, 1950 LEBs) UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) on device 0:12. Freeing init memory: 136K Starting logging: OK Populating /dev using udev: done Starting portmap: portmap: fork: No such devicedone ALSA: Restoring mixer settings... Starting network... /usr/sbin/alsactl: load_state:1686: No soundcards found... Starting dropbear sshd: generating rsa key... generating dsa key... OK Any ideas on what can causes my trouble? Thx