[PATCH -mm] MMCONFIG: Fix x86_64 ioremap base_address

[OGAWA Hirofumi <hogawa@miraclelinux.com>]

Current -mm's mmconfig has some problems of remapped range.

a) In the case of broken MCFG tables on Asus etc., we need to remap
256M range, but currently only remap 1M.

b) The base address always corresponds to bus number 0, but currently
we are assuming it corresponds to start bus number.

This patch fixes the above problems.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
---

 arch/x86_64/pci/mmconfig.c |   48 ++++++++++++++++++++++++++++++++-------------
 1 file changed, 35 insertions(+), 13 deletions(-)

diff -puN arch/x86_64/pci/mmconfig.c~pci-mmconfig-ioremap-range-fix arch/x86_64/pci/mmconfig.c
--- linux-2.6/arch/x86_64/pci/mmconfig.c~pci-mmconfig-ioremap-range-fix	2006-12-23 08:52:15.000000000 +0900
+++ linux-2.6-hirofumi/arch/x86_64/pci/mmconfig.c	2006-12-23 09:35:37.000000000 +0900
@@ -24,6 +24,39 @@ struct mmcfg_virt {
 };
 static struct mmcfg_virt *pci_mmcfg_virt;
 
+static inline int mcfg_broken(void)
+{
+	struct acpi_table_mcfg_config *cfg = &pci_mmcfg_config[0];
+
+	/* Handle more broken MCFG tables on Asus etc.
+	   They only contain a single entry for bus 0-0. Assume
+ 	   this applies to all busses. */
+	if (pci_mmcfg_config_num == 1 &&
+	    cfg->pci_segment_group_number == 0 &&
+	    (cfg->start_bus_number | cfg->end_bus_number) == 0)
+		return 1;
+	return 0;
+}
+
+static void __iomem *mcfg_ioremap(struct acpi_table_mcfg_config *cfg)
+{
+	void __iomem *addr;
+	u32 size;
+
+	if (mcfg_broken())
+		size = 256 << 20;
+	else
+		size = (cfg->end_bus_number + 1) << 20;
+
+	addr = ioremap_nocache(cfg->base_address, size);
+	if (addr) {
+		printk(KERN_INFO "PCI: Using MMCONFIG at %x - %x\n",
+		       cfg->base_address,
+		       cfg->base_address + size - 1);
+	}
+	return addr;
+}
+
 static char __iomem *get_virt(unsigned int seg, unsigned bus)
 {
 	int cfg_num = -1;
@@ -41,13 +74,7 @@ static char __iomem *get_virt(unsigned i
 			return pci_mmcfg_virt[cfg_num].virt;
 	}
 
-	/* Handle more broken MCFG tables on Asus etc.
-	   They only contain a single entry for bus 0-0. Assume
- 	   this applies to all busses. */
-	cfg = &pci_mmcfg_config[0];
-	if (pci_mmcfg_config_num == 1 &&
-		cfg->pci_segment_group_number == 0 &&
-		(cfg->start_bus_number | cfg->end_bus_number) == 0)
+	if (mcfg_broken())
 		return pci_mmcfg_virt[0].virt;
 
 	/* Fall back to type 0 */
@@ -139,19 +166,14 @@ int __init pci_mmcfg_arch_init(void)
 	}
 
 	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		u32 size = (pci_mmcfg_config[0].end_bus_number - pci_mmcfg_config[0].start_bus_number + 1) << 20;
 		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
-		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
-							 size);
+		pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]);
 		if (!pci_mmcfg_virt[i].virt) {
 			printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
 					"segment %d\n",
 			       pci_mmcfg_config[i].pci_segment_group_number);
 			return 0;
 		}
-		printk(KERN_INFO "PCI: Using MMCONFIG at %x-%x\n",
-		       pci_mmcfg_config[i].base_address,
-		       pci_mmcfg_config[i].base_address + size - 1);
 	}
 
 	raw_pci_ops = &pci_mmcfg;
_

-- 
OGAWA Hirofumi <hogawa@miraclelinux.com>