From: ebiederm@xmission.com (Eric W. Biederman)
To: "Numan DEMİRDÖĞEN" <numand46@gmail.com>
Cc: Chris Ball <cjb@laptop.org>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: sdhci causing WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x9b/0xd0()
Date: Wed, 04 Jan 2012 10:50:49 -0800 [thread overview]
Message-ID: <m11urffgja.fsf@fess.ebiederm.org> (raw)
In-Reply-To: <CAHa016cp4uNZqCvJW0RZgEXST-VqpVWjYSXGE+RhThXXo6nzCA@mail.gmail.com> ("Numan DEMİRDÖĞEN"'s message of "Wed, 4 Jan 2012 15:09:20 +0200")
Numan DEMİRDÖĞEN <numand46@gmail.com> writes:
> I have been getting this message since I started to use 3.0 series'
> kernels. I found this (https://lkml.org/lkml/2011/5/4/516) topic
> related to this warning.
Hopefully I have added some relevant Cc's. The sdhci driver attempting
to abuse sysfs and sysfs is refusing to put up with it.
Can someone who understands the sdhci driver take a look at this?
Eric
> Best regards,
> Numan.
> ---
> ver_linux output:
>
> Linux arch 3.1.6-1-ARCH #1 SMP PREEMPT Thu Dec 22 08:52:33 UTC 2011
> i686 Intel(R) Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux
> Gnu C 4.6.2
> Gnu make 3.82
> binutils Binutils
> util-linux fdformat
> mount support
> module-init-tools 3.16
> e2fsprogs 1.41.14
> xfsprogs 3.1.7
> Linux C Library > libc.2.15
> Dynamic linker (ldd) 2.15
> Linux C++ Library 6.0.16
> Procps 3.2.8
> Kbd 1.15.3
> Sh-utils 8.14
> Modules Loaded michael_mic arc4 ecb lib80211_crypt_tkip pcmcia
> radeon ttm sdhci_pci sdhci firewire_ohci firewire_core ipw2200 libipw
> yenta_socket cfg80211 iTCO_wdt r8169 intel_agp snd_hda_codec_si3054
> rfkill pcmcia_rsrc snd_hda_codec_analog psmouse pcmcia_core mmc_core
> intel_gtt i2c_i801 mii iTCO_vendor_support crc_itu_t drm_kms_helper
> evdev lib80211 battery ac video snd_hda_intel snd_hda_codec drm
> snd_hwdep snd_pcm agpgart tifm_7xx1 tifm_core i2c_algo_bit i2c_core
> snd_timer snd soundcore snd_page_alloc thermal button cpufreq_ondemand
> acpi_cpufreq freq_table processor mperf ext4 mbcache jbd2 crc16 usbhid
> hid sr_mod cdrom sd_mod pata_acpi uhci_hcd ahci libahci ata_piix
> libata ehci_hcd scsi_mod usbcore
>
> dmesg excerpt:
>
> sdhci-pci 0000:06:09.4: SDHCI controller found [104c:8034] (rev 0)
> sdhci-pci 0000:06:09.4: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> _regulator_get: 0000:06:09.4 supply vmmc not found, using dummy regulator
> Registered led device: mmc0::
> mmc0: SDHCI controller on PCI [0000:06:09.4] using PIO
> _regulator_get: 0000:06:09.4 supply vmmc not found, using dummy regulator
> ------------[ cut here ]------------
> WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x9b/0xd0()
> Hardware name: AMILO Pro V2045
> sysfs: cannot create duplicate filename
> '/devices/pci0000:00/0000:00:1e.0/0000:06:09.4/microamps_requested_0000:06:09.4-vmmc'
> Modules linked in: pcmcia radeon ttm sdhci_pci(+) sdhci firewire_ohci
> firewire_core ipw2200 libipw yenta_socket cfg80211 iTCO_wdt r8169
> intel_agp snd_hda_codec_si3054 rfkill pcmcia_rsrc snd_hda_codec_analog
> psmouse pcmcia_core mmc_core intel_gtt i2c_i801 mii
> iTCO_vendor_support crc_itu_t drm_kms_helper evdev lib80211 battery ac
> video snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm agpgart
> tifm_7xx1 tifm_core i2c_algo_bit i2c_core snd_timer snd soundcore
> snd_page_alloc thermal button cpufreq_ondemand acpi_cpufreq freq_table
> processor mperf ext4 mbcache jbd2 crc16 usbhid hid sr_mod cdrom sd_mod
> pata_acpi uhci_hcd ahci libahci ata_piix libata ehci_hcd scsi_mod
> usbcore
> Pid: 315, comm: modprobe Not tainted 3.1.6-1-ARCH #1
> Call Trace:
> [<c0147182>] warn_slowpath_common+0x72/0xa0
> [<c02780db>] ? sysfs_add_one+0x9b/0xd0
> [<c02780db>] ? sysfs_add_one+0x9b/0xd0
> [<c0147253>] warn_slowpath_fmt+0x33/0x40
> [<c02780db>] sysfs_add_one+0x9b/0xd0
> [<c02773c9>] sysfs_add_file_mode+0x49/0x90
> [<c0277428>] sysfs_add_file+0x18/0x20
> [<c02774e1>] sysfs_create_file+0x21/0x30
> [<c036ddc8>] device_create_file+0x18/0x20
> [<c0341f5f>] create_regulator+0xdf/0x320
> [<c0342384>] _regulator_get+0x1e4/0x2a0
> [<e26803d0>] ? sdhci_timeout_timer+0xd0/0xd0 [sdhci]
> [<c034246f>] regulator_get+0xf/0x20
> [<e267e64a>] sdhci_add_host+0x5ea/0xa80 [sdhci]
> [<e268ce47>] sdhci_pci_probe+0x31a/0x3d3 [sdhci_pci]
> [<c02e782d>] pci_device_probe+0x8d/0x120
> [<c0278a27>] ? sysfs_create_link+0x17/0x20
> [<c0370da8>] driver_probe_device+0x68/0x170
> [<c0370f41>] __driver_attach+0x91/0xa0
> [<c0370eb0>] ? driver_probe_device+0x170/0x170
> [<c0370009>] bus_for_each_dev+0x49/0x70
> [<c0370ac1>] driver_attach+0x21/0x30
> [<c0370eb0>] ? driver_probe_device+0x170/0x170
> [<c037079f>] bus_add_driver+0x17f/0x260
> [<c02e7690>] ? pci_dev_put+0x20/0x20
> [<c03713f6>] driver_register+0x66/0x110
> [<c02e85c3>] __pci_register_driver+0x43/0xc0
> [<e268f017>] sdhci_drv_init+0x17/0x19 [sdhci_pci]
> [<c0101125>] do_one_initcall+0x35/0x170
> [<e268f000>] ? 0xe268efff
> [<c0180ca5>] sys_init_module+0x905/0x1ac0
> [<c046325f>] sysenter_do_call+0x12/0x28
> ---[ end trace 1b4ccae14fe3a3a3 ]---
> create_regulator: dummy: could not add regulator_dev requested
> microamps sysfs entry
> mmc1: no vmmc regulator found
> Registered led device: mmc1::
> mmc1: SDHCI controller on PCI [0000:06:09.4] using PIO
> _regulator_get: 0000:06:09.4 supply vmmc not found, using dummy regulator
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
WARNING: multiple messages have this Message-ID (diff)
From: ebiederm@xmission.com (Eric W. Biederman)
To: "Numan DEMİRDÖĞEN" <numand46@gmail.com>
Cc: Chris Ball <cjb@laptop.org>, linux-mmc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: Re: sdhci causing WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x9b/0xd0()
Date: Wed, 04 Jan 2012 10:50:49 -0800 [thread overview]
Message-ID: <m11urffgja.fsf@fess.ebiederm.org> (raw)
In-Reply-To: <CAHa016cp4uNZqCvJW0RZgEXST-VqpVWjYSXGE+RhThXXo6nzCA@mail.gmail.com> ("Numan DEMİRDÖĞEN"'s message of "Wed, 4 Jan 2012 15:09:20 +0200")
Numan DEMİRDÖĞEN <numand46@gmail.com> writes:
> I have been getting this message since I started to use 3.0 series'
> kernels. I found this (https://lkml.org/lkml/2011/5/4/516) topic
> related to this warning.
Hopefully I have added some relevant Cc's. The sdhci driver attempting
to abuse sysfs and sysfs is refusing to put up with it.
Can someone who understands the sdhci driver take a look at this?
Eric
> Best regards,
> Numan.
> ---
> ver_linux output:
>
> Linux arch 3.1.6-1-ARCH #1 SMP PREEMPT Thu Dec 22 08:52:33 UTC 2011
> i686 Intel(R) Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux
> Gnu C 4.6.2
> Gnu make 3.82
> binutils Binutils
> util-linux fdformat
> mount support
> module-init-tools 3.16
> e2fsprogs 1.41.14
> xfsprogs 3.1.7
> Linux C Library > libc.2.15
> Dynamic linker (ldd) 2.15
> Linux C++ Library 6.0.16
> Procps 3.2.8
> Kbd 1.15.3
> Sh-utils 8.14
> Modules Loaded michael_mic arc4 ecb lib80211_crypt_tkip pcmcia
> radeon ttm sdhci_pci sdhci firewire_ohci firewire_core ipw2200 libipw
> yenta_socket cfg80211 iTCO_wdt r8169 intel_agp snd_hda_codec_si3054
> rfkill pcmcia_rsrc snd_hda_codec_analog psmouse pcmcia_core mmc_core
> intel_gtt i2c_i801 mii iTCO_vendor_support crc_itu_t drm_kms_helper
> evdev lib80211 battery ac video snd_hda_intel snd_hda_codec drm
> snd_hwdep snd_pcm agpgart tifm_7xx1 tifm_core i2c_algo_bit i2c_core
> snd_timer snd soundcore snd_page_alloc thermal button cpufreq_ondemand
> acpi_cpufreq freq_table processor mperf ext4 mbcache jbd2 crc16 usbhid
> hid sr_mod cdrom sd_mod pata_acpi uhci_hcd ahci libahci ata_piix
> libata ehci_hcd scsi_mod usbcore
>
> dmesg excerpt:
>
> sdhci-pci 0000:06:09.4: SDHCI controller found [104c:8034] (rev 0)
> sdhci-pci 0000:06:09.4: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> _regulator_get: 0000:06:09.4 supply vmmc not found, using dummy regulator
> Registered led device: mmc0::
> mmc0: SDHCI controller on PCI [0000:06:09.4] using PIO
> _regulator_get: 0000:06:09.4 supply vmmc not found, using dummy regulator
> ------------[ cut here ]------------
> WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x9b/0xd0()
> Hardware name: AMILO Pro V2045
> sysfs: cannot create duplicate filename
> '/devices/pci0000:00/0000:00:1e.0/0000:06:09.4/microamps_requested_0000:06:09.4-vmmc'
> Modules linked in: pcmcia radeon ttm sdhci_pci(+) sdhci firewire_ohci
> firewire_core ipw2200 libipw yenta_socket cfg80211 iTCO_wdt r8169
> intel_agp snd_hda_codec_si3054 rfkill pcmcia_rsrc snd_hda_codec_analog
> psmouse pcmcia_core mmc_core intel_gtt i2c_i801 mii
> iTCO_vendor_support crc_itu_t drm_kms_helper evdev lib80211 battery ac
> video snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm agpgart
> tifm_7xx1 tifm_core i2c_algo_bit i2c_core snd_timer snd soundcore
> snd_page_alloc thermal button cpufreq_ondemand acpi_cpufreq freq_table
> processor mperf ext4 mbcache jbd2 crc16 usbhid hid sr_mod cdrom sd_mod
> pata_acpi uhci_hcd ahci libahci ata_piix libata ehci_hcd scsi_mod
> usbcore
> Pid: 315, comm: modprobe Not tainted 3.1.6-1-ARCH #1
> Call Trace:
> [<c0147182>] warn_slowpath_common+0x72/0xa0
> [<c02780db>] ? sysfs_add_one+0x9b/0xd0
> [<c02780db>] ? sysfs_add_one+0x9b/0xd0
> [<c0147253>] warn_slowpath_fmt+0x33/0x40
> [<c02780db>] sysfs_add_one+0x9b/0xd0
> [<c02773c9>] sysfs_add_file_mode+0x49/0x90
> [<c0277428>] sysfs_add_file+0x18/0x20
> [<c02774e1>] sysfs_create_file+0x21/0x30
> [<c036ddc8>] device_create_file+0x18/0x20
> [<c0341f5f>] create_regulator+0xdf/0x320
> [<c0342384>] _regulator_get+0x1e4/0x2a0
> [<e26803d0>] ? sdhci_timeout_timer+0xd0/0xd0 [sdhci]
> [<c034246f>] regulator_get+0xf/0x20
> [<e267e64a>] sdhci_add_host+0x5ea/0xa80 [sdhci]
> [<e268ce47>] sdhci_pci_probe+0x31a/0x3d3 [sdhci_pci]
> [<c02e782d>] pci_device_probe+0x8d/0x120
> [<c0278a27>] ? sysfs_create_link+0x17/0x20
> [<c0370da8>] driver_probe_device+0x68/0x170
> [<c0370f41>] __driver_attach+0x91/0xa0
> [<c0370eb0>] ? driver_probe_device+0x170/0x170
> [<c0370009>] bus_for_each_dev+0x49/0x70
> [<c0370ac1>] driver_attach+0x21/0x30
> [<c0370eb0>] ? driver_probe_device+0x170/0x170
> [<c037079f>] bus_add_driver+0x17f/0x260
> [<c02e7690>] ? pci_dev_put+0x20/0x20
> [<c03713f6>] driver_register+0x66/0x110
> [<c02e85c3>] __pci_register_driver+0x43/0xc0
> [<e268f017>] sdhci_drv_init+0x17/0x19 [sdhci_pci]
> [<c0101125>] do_one_initcall+0x35/0x170
> [<e268f000>] ? 0xe268efff
> [<c0180ca5>] sys_init_module+0x905/0x1ac0
> [<c046325f>] sysenter_do_call+0x12/0x28
> ---[ end trace 1b4ccae14fe3a3a3 ]---
> create_regulator: dummy: could not add regulator_dev requested
> microamps sysfs entry
> mmc1: no vmmc regulator found
> Registered led device: mmc1::
> mmc1: SDHCI controller on PCI [0000:06:09.4] using PIO
> _regulator_get: 0000:06:09.4 supply vmmc not found, using dummy regulator
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2012-01-04 18:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-04 13:09 WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x9b/0xd0() Numan DEMİRDÖĞEN
2012-01-04 18:50 ` Eric W. Biederman [this message]
2012-01-04 18:50 ` sdhci causing " Eric W. Biederman
2012-01-06 0:12 ` Numan DEMİRDÖĞEN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m11urffgja.fsf@fess.ebiederm.org \
--to=ebiederm@xmission.com \
--cc=cjb@laptop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=numand46@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.