From: diekema@bucks.si.com (diekema_jon)
To: linuxppc-embedded@lists.linuxppc.org
Cc: all@cideas.com
Subject: Differences between 8xx and 7xx MontaVista root file systems
Date: Wed, 14 Jun 2000 09:53:19 -0400 (EDT) [thread overview]
Message-ID: <m132Dbb-001SyaC@bucks> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=US-ASCII, Size: 6269 bytes --]
Differences in operation between
/opt/hardhat/devkit/ppc/8xx/target and
/opt/hardhat/devkit/ppc/7xx/target from the MontaVista CDK
Hardware:
EST SBC8260
MPC8260 Rev A.1 CPU/CPM/BUS: 200/133/66 Mhz
MontaVista CDK packages being used:
hhl-rpmconfig-0.7-1
hhl-ppc_7xx-ash-0.2-1
hhl-ppc_7xx-bash-2.03-5
hhl-ppc_7xx-binutils-2.9.5.0.22-7
hhl-ppc_7xx-filesystem-2.0-4
hhl-ppc_7xx-fileutils-4.0-2
hhl-ppc_7xx-ftp-0.15-3
hhl-ppc_7xx-ftpd-0.11-3
hhl-ppc_7xx-gcc-2.95.2-10
hhl-ppc_7xx-gdb-4.17.0.11-2
hhl-ppc_7xx-gdb-client-4.17.0.11-2
hhl-ppc_7xx-gdb-server-4.17.0.11-2
hhl-ppc_7xx-glibc-2.1.2-10
hhl-ppc_7xx-gpm-1.17.9-1
hhl-ppc_7xx-gzip-1.2.4-2
hhl-ppc_7xx-inetd-0.10-6
hhl-ppc_7xx-ldconfig-1.9.5-2
hhl-ppc_7xx-libtermcap-2.0.8-3
hhl-ppc_7xx-microwindows-0.88pre7-1
hhl-ppc_7xx-modutils-2.1.121-2
hhl-ppc_7xx-net-tools-1.53-2
hhl-ppc_7xx-ping-0.10-6
hhl-ppc_7xx-popt-1.4-1
hhl-ppc_7xx-procps-2.0.4-2
hhl-ppc_7xx-psmisc-18-2
hhl-ppc_7xx-pump-0.7.2-1
hhl-ppc_7xx-sash-3.4-3
hhl-ppc_7xx-sh-utils-2.0-4
hhl-ppc_7xx-strace-3.99.1-2
hhl-ppc_7xx-sysvinit-2.77-6
hhl-ppc_7xx-tar-1.13.11-2
hhl-ppc_7xx-telnet-4.4.2-3
hhl-ppc_7xx-telnetd-0.10-3
hhl-ppc_7xx-termcap-9.12.6-2
hhl-ppc_7xx-textutils-2.0-2
hhl-ppc_7xx-util-linux-2.9w-4
hhl-ppc_7xx-zlib-1.1.3-2
hhl-ppc_7xx-zsrec-1.0-3
hhl-ppc_8xx-ash-0.2-1
hhl-ppc_8xx-bash-2.03-5
hhl-ppc_8xx-binutils-2.9.5.0.22-7
hhl-ppc_8xx-filesystem-2.0-4
hhl-ppc_8xx-fileutils-4.0-2
hhl-ppc_8xx-ftp-0.15-3
hhl-ppc_8xx-ftpd-0.11-3
hhl-ppc_8xx-gcc-2.95.2-10
hhl-ppc_8xx-gdb-4.17.0.11-2
hhl-ppc_8xx-gdb-client-4.17.0.11-2
hhl-ppc_8xx-gdb-server-4.17.0.11-2
hhl-ppc_8xx-glibc-2.1.2-10
hhl-ppc_8xx-gpm-1.17.9-1
hhl-ppc_8xx-gzip-1.2.4-2
hhl-ppc_8xx-inetd-0.10-6
hhl-ppc_8xx-ldconfig-1.9.5-2
hhl-ppc_8xx-libtermcap-2.0.8-3
hhl-ppc_8xx-microwindows-0.88pre7-1
hhl-ppc_8xx-modutils-2.1.121-2
hhl-ppc_8xx-net-tools-1.53-2
hhl-ppc_8xx-ping-0.10-6
hhl-ppc_8xx-popt-1.4-1
hhl-ppc_8xx-procps-2.0.4-2
hhl-ppc_8xx-psmisc-18-2
hhl-ppc_8xx-pump-0.7.2-1
hhl-ppc_8xx-sash-3.4-3
hhl-ppc_8xx-sh-utils-2.0-4
hhl-ppc_8xx-strace-3.99.1-2
hhl-ppc_8xx-sysvinit-2.77-6
hhl-ppc_8xx-tar-1.13.11-2
hhl-ppc_8xx-telnet-4.4.2-3
hhl-ppc_8xx-telnetd-0.10-3
hhl-ppc_8xx-termcap-9.12.6-2
hhl-ppc_8xx-textutils-2.0-2
hhl-ppc_8xx-util-linux-2.9w-4
hhl-ppc_8xx-zlib-1.1.3-2
hhl-ppc_8xx-zsrec-1.0-3
Environment:
- Using the /opt/hardhat/devkit/ppc/7xx/target for the
NFS mounted root filesystem
- Linux: 2.4.0-test1-ac10
Warnings:
- (init) used obsolete /dev/cua - update software to use /dev/ttyS0
- (swapper) used obsolete /dev/cua - update software to use /dev/ttyS0
Problems:
- "mount -o rsize=8192,wsize=8192,rw,remount /" complains about
"directory to mount not in host:dir format". If I use the 8xx
root, then it works as expected.
- bash does NOT provide job control. If I use the 8xx root, then
bash runs with job control.
Total memory = 16MB; using 0kB for hash table (at 00000000)
Linux version 2.4.0-test1-ac10 (diekema@dell) (gcc version 2.95.2 19991024 (release)) #43 Tue Jun 13 10:08:58 EDT 2000
Boot arguments: root=/dev/nfs rw nfsroot=126.28.1.117:/target nfsaddrs=126.1.4.5:126.28.1.117
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw nfsroot=126.28.1.117:/target nfsaddrs=126.1.4.5:126.28.1.117
Calibrating delay loop... 131.89 BogoMIPS
Memory: 14716k available (872k kernel code, 408k data, 48k init) [c0000000,c1000000]
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
kmem_create: Poisoning requested, but con given - skbuff_head_cache
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
Starting kswapd v1.6
CPM UART driver version 0.01
ttyS00 at 0x0000 is a SMC
ttyS01 at 0x0040 is a SMC
ttyS02 at 0x8100 is a SCC
ttyS03 at 0x8200 is a SCC
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: registered device at major 7
loop: enabling 8 loop devices
eth0: SCC ENET Version 0.1, 00:a0:1e:01:04:05
IP-Config: Guessing netmask 255.0.0.0
kmem_create: Forcing size word alignment - nfs_fh
Looking up port of RPC 100003/2 on 126.28.1.117
Looking up port of RPC 100005/2 on 126.28.1.117
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 48k iniü
tty_io.c: process 1 (swapper) used obsolete /dev/cua - update software to use /dev/ttyS0
tty_io.c: process 1 (init) used obsolete /dev/cua - update software to use /dev/ttý0
tty_io.c: process 1 (init) used obsolete /dev/cua - update software to use /dev/ttyS0
INIT:
tty_io.c: process 1 (init) used obsolete /dev/cua - update software to use /dev/ttyS0
version 2.77 boÿing
tty_io.c: process 1 (init) used obsolete /dev/cua - update software to use /dev/ttyS0
+ /sbin/ifconfig lo 127.0.0.1
+
+ mount /proc
+ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:A0:1E:01:04:05
inet addr:126.1.4.5 Bcast:126.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1094 errors:0 dropped:0 overruns:0 frame:0
TX packets:448 errors:0 dropped:0 overruns:0 carrier:0
collisions:3 txqueuelen:100
Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3904 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
+ mount -a
+ mount -o rsize=8192,wsize=8192,rw,remount /
mount: directory to mount not in host:dir format
# bash
bash: no job control in this shell
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
reply other threads:[~2000-06-14 13:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m132Dbb-001SyaC@bucks \
--to=diekema@bucks.si.com \
--cc=all@cideas.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.