* [PATCH 1/3] mmc: meson-gx: fix setting f_min
@ 2017-01-26 21:41 ` Heiner Kallweit
0 siblings, 0 replies; 12+ messages in thread
From: Heiner Kallweit @ 2017-01-26 21:41 UTC (permalink / raw)
To: linus-amlogic
Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
I think the itention is to set f_min to 400 kHz.
Change value and comment accordingly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/mmc/host/meson-gx-mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index bf19d03c..cf071756 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -268,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
if (f_min != UINT_MAX)
f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
else
- f_min = 4000000; /* default min: 400 MHz */
+ f_min = 400000; /* default min: 400 kHz */
host->mmc->f_min = f_min;
/* create the mux */
--
2.11.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
@ 2017-01-26 21:41 ` Heiner Kallweit
0 siblings, 0 replies; 12+ messages in thread
From: Heiner Kallweit @ 2017-01-26 21:41 UTC (permalink / raw)
To: linux-arm-kernel
Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
I think the itention is to set f_min to 400 kHz.
Change value and comment accordingly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/mmc/host/meson-gx-mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index bf19d03c..cf071756 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -268,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
if (f_min != UINT_MAX)
f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
else
- f_min = 4000000; /* default min: 400 MHz */
+ f_min = 400000; /* default min: 400 kHz */
host->mmc->f_min = f_min;
/* create the mux */
--
2.11.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
2017-01-26 21:41 ` Heiner Kallweit
@ 2017-01-27 17:42 ` Kevin Hilman
-1 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2017-01-27 17:42 UTC (permalink / raw)
To: linus-amlogic
Heiner Kallweit <hkallweit1@gmail.com> writes:
> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
> I think the itention is to set f_min to 400 kHz.
Yes indeed.
> Change value and comment accordingly.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
> ---
> drivers/mmc/host/meson-gx-mmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index bf19d03c..cf071756 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -268,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
> if (f_min != UINT_MAX)
> f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
> else
> - f_min = 4000000; /* default min: 400 MHz */
> + f_min = 400000; /* default min: 400 kHz */
> host->mmc->f_min = f_min;
>
> /* create the mux */
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
@ 2017-01-27 17:42 ` Kevin Hilman
0 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2017-01-27 17:42 UTC (permalink / raw)
To: linux-arm-kernel
Heiner Kallweit <hkallweit1@gmail.com> writes:
> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
> I think the itention is to set f_min to 400 kHz.
Yes indeed.
> Change value and comment accordingly.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
> ---
> drivers/mmc/host/meson-gx-mmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index bf19d03c..cf071756 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -268,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
> if (f_min != UINT_MAX)
> f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
> else
> - f_min = 4000000; /* default min: 400 MHz */
> + f_min = 400000; /* default min: 400 kHz */
> host->mmc->f_min = f_min;
>
> /* create the mux */
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
2017-01-26 21:41 ` Heiner Kallweit
@ 2017-01-31 11:55 ` Ulf Hansson
-1 siblings, 0 replies; 12+ messages in thread
From: Ulf Hansson @ 2017-01-31 11:55 UTC (permalink / raw)
To: linus-amlogic
On 26 January 2017 at 22:41, Heiner Kallweit <hkallweit1@gmail.com> wrote:
> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
> I think the itention is to set f_min to 400 kHz.
> Change value and comment accordingly.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Heiner, could you please collect the mmc meson changes that you
recently have submitted in one series and re-post to linux-mmc. I can
pick them up from there.
Kind regards
Uffe
> ---
> drivers/mmc/host/meson-gx-mmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index bf19d03c..cf071756 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -268,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
> if (f_min != UINT_MAX)
> f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
> else
> - f_min = 4000000; /* default min: 400 MHz */
> + f_min = 400000; /* default min: 400 kHz */
> host->mmc->f_min = f_min;
>
> /* create the mux */
> --
> 2.11.0
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
@ 2017-01-31 11:55 ` Ulf Hansson
0 siblings, 0 replies; 12+ messages in thread
From: Ulf Hansson @ 2017-01-31 11:55 UTC (permalink / raw)
To: linux-arm-kernel
On 26 January 2017 at 22:41, Heiner Kallweit <hkallweit1@gmail.com> wrote:
> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
> I think the itention is to set f_min to 400 kHz.
> Change value and comment accordingly.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Heiner, could you please collect the mmc meson changes that you
recently have submitted in one series and re-post to linux-mmc. I can
pick them up from there.
Kind regards
Uffe
> ---
> drivers/mmc/host/meson-gx-mmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index bf19d03c..cf071756 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -268,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
> if (f_min != UINT_MAX)
> f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
> else
> - f_min = 4000000; /* default min: 400 MHz */
> + f_min = 400000; /* default min: 400 kHz */
> host->mmc->f_min = f_min;
>
> /* create the mux */
> --
> 2.11.0
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
2017-01-31 11:55 ` Ulf Hansson
@ 2017-01-31 20:32 ` Heiner Kallweit
-1 siblings, 0 replies; 12+ messages in thread
From: Heiner Kallweit @ 2017-01-31 20:32 UTC (permalink / raw)
To: linus-amlogic
Am 31.01.2017 um 12:55 schrieb Ulf Hansson:
> On 26 January 2017 at 22:41, Heiner Kallweit <hkallweit1@gmail.com> wrote:
>> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
>> I think the itention is to set f_min to 400 kHz.
>> Change value and comment accordingly.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>
> Heiner, could you please collect the mmc meson changes that you
> recently have submitted in one series and re-post to linux-mmc. I can
> pick them up from there.
>
Sure. Apart from the ones you've reviewed already I have few more.
I'll add them to the patch set.
Regards, Heiner
> Kind regards
> Uffe
>
>> ---
>> drivers/mmc/host/meson-gx-mmc.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
>> index bf19d03c..cf071756 100644
>> --- a/drivers/mmc/host/meson-gx-mmc.c
>> +++ b/drivers/mmc/host/meson-gx-mmc.c
>> @@ -268,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
>> if (f_min != UINT_MAX)
>> f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
>> else
>> - f_min = 4000000; /* default min: 400 MHz */
>> + f_min = 400000; /* default min: 400 kHz */
>> host->mmc->f_min = f_min;
>>
>> /* create the mux */
>> --
>> 2.11.0
>>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
@ 2017-01-31 20:32 ` Heiner Kallweit
0 siblings, 0 replies; 12+ messages in thread
From: Heiner Kallweit @ 2017-01-31 20:32 UTC (permalink / raw)
To: linux-arm-kernel
Am 31.01.2017 um 12:55 schrieb Ulf Hansson:
> On 26 January 2017 at 22:41, Heiner Kallweit <hkallweit1@gmail.com> wrote:
>> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
>> I think the itention is to set f_min to 400 kHz.
>> Change value and comment accordingly.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>
> Heiner, could you please collect the mmc meson changes that you
> recently have submitted in one series and re-post to linux-mmc. I can
> pick them up from there.
>
Sure. Apart from the ones you've reviewed already I have few more.
I'll add them to the patch set.
Regards, Heiner
> Kind regards
> Uffe
>
>> ---
>> drivers/mmc/host/meson-gx-mmc.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
>> index bf19d03c..cf071756 100644
>> --- a/drivers/mmc/host/meson-gx-mmc.c
>> +++ b/drivers/mmc/host/meson-gx-mmc.c
>> @@ -268,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
>> if (f_min != UINT_MAX)
>> f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
>> else
>> - f_min = 4000000; /* default min: 400 MHz */
>> + f_min = 400000; /* default min: 400 kHz */
>> host->mmc->f_min = f_min;
>>
>> /* create the mux */
>> --
>> 2.11.0
>>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
2017-01-31 20:32 ` Heiner Kallweit
@ 2017-01-31 22:44 ` Kevin Hilman
-1 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2017-01-31 22:44 UTC (permalink / raw)
To: linus-amlogic
On Tue, Jan 31, 2017 at 12:32 PM, Heiner Kallweit <hkallweit1@gmail.com> wrote:
> Am 31.01.2017 um 12:55 schrieb Ulf Hansson:
>> On 26 January 2017 at 22:41, Heiner Kallweit <hkallweit1@gmail.com> wrote:
>>> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
>>> I think the itention is to set f_min to 400 kHz.
>>> Change value and comment accordingly.
>>>
>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>
>> Heiner, could you please collect the mmc meson changes that you
>> recently have submitted in one series and re-post to linux-mmc. I can
>> pick them up from there.
>>
> Sure. Apart from the ones you've reviewed already I have few more.
> I'll add them to the patch set.
When you re-post, it's customary to collect and add the various tags
(acked-by, tested-by, reviewed-by) to the changelog so it's easy to
tell what's already been reviewed/acked etc.
Kevin
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
@ 2017-01-31 22:44 ` Kevin Hilman
0 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2017-01-31 22:44 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 31, 2017 at 12:32 PM, Heiner Kallweit <hkallweit1@gmail.com> wrote:
> Am 31.01.2017 um 12:55 schrieb Ulf Hansson:
>> On 26 January 2017 at 22:41, Heiner Kallweit <hkallweit1@gmail.com> wrote:
>>> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
>>> I think the itention is to set f_min to 400 kHz.
>>> Change value and comment accordingly.
>>>
>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>
>> Heiner, could you please collect the mmc meson changes that you
>> recently have submitted in one series and re-post to linux-mmc. I can
>> pick them up from there.
>>
> Sure. Apart from the ones you've reviewed already I have few more.
> I'll add them to the patch set.
When you re-post, it's customary to collect and add the various tags
(acked-by, tested-by, reviewed-by) to the changelog so it's easy to
tell what's already been reviewed/acked etc.
Kevin
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
2017-01-31 22:44 ` Kevin Hilman
@ 2017-02-01 0:36 ` Kevin Hilman
-1 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2017-02-01 0:36 UTC (permalink / raw)
To: linus-amlogic
On Tue, Jan 31, 2017 at 2:44 PM, Kevin Hilman <khilman@baylibre.com> wrote:
> On Tue, Jan 31, 2017 at 12:32 PM, Heiner Kallweit <hkallweit1@gmail.com> wrote:
>> Am 31.01.2017 um 12:55 schrieb Ulf Hansson:
>>> On 26 January 2017 at 22:41, Heiner Kallweit <hkallweit1@gmail.com> wrote:
>>>> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
>>>> I think the itention is to set f_min to 400 kHz.
>>>> Change value and comment accordingly.
>>>>
>>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>>
>>> Heiner, could you please collect the mmc meson changes that you
>>> recently have submitted in one series and re-post to linux-mmc. I can
>>> pick them up from there.
>>>
>> Sure. Apart from the ones you've reviewed already I have few more.
>> I'll add them to the patch set.
>
> When you re-post, it's customary to collect and add the various tags
> (acked-by, tested-by, reviewed-by) to the changelog so it's easy to
> tell what's already been reviewed/acked etc.
Also, please be sure to Cc the linux-amlogic list.
Thanks,
Kevin
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] mmc: meson-gx: fix setting f_min
@ 2017-02-01 0:36 ` Kevin Hilman
0 siblings, 0 replies; 12+ messages in thread
From: Kevin Hilman @ 2017-02-01 0:36 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 31, 2017 at 2:44 PM, Kevin Hilman <khilman@baylibre.com> wrote:
> On Tue, Jan 31, 2017 at 12:32 PM, Heiner Kallweit <hkallweit1@gmail.com> wrote:
>> Am 31.01.2017 um 12:55 schrieb Ulf Hansson:
>>> On 26 January 2017 at 22:41, Heiner Kallweit <hkallweit1@gmail.com> wrote:
>>>> Currently f_min is set to 4 MHz whilst the comment states 400 MHz.
>>>> I think the itention is to set f_min to 400 kHz.
>>>> Change value and comment accordingly.
>>>>
>>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>>
>>> Heiner, could you please collect the mmc meson changes that you
>>> recently have submitted in one series and re-post to linux-mmc. I can
>>> pick them up from there.
>>>
>> Sure. Apart from the ones you've reviewed already I have few more.
>> I'll add them to the patch set.
>
> When you re-post, it's customary to collect and add the various tags
> (acked-by, tested-by, reviewed-by) to the changelog so it's easy to
> tell what's already been reviewed/acked etc.
Also, please be sure to Cc the linux-amlogic list.
Thanks,
Kevin
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-02-01 0:36 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-01-26 21:41 [PATCH 1/3] mmc: meson-gx: fix setting f_min Heiner Kallweit
2017-01-26 21:41 ` Heiner Kallweit
2017-01-27 17:42 ` Kevin Hilman
2017-01-27 17:42 ` Kevin Hilman
2017-01-31 11:55 ` Ulf Hansson
2017-01-31 11:55 ` Ulf Hansson
2017-01-31 20:32 ` Heiner Kallweit
2017-01-31 20:32 ` Heiner Kallweit
2017-01-31 22:44 ` Kevin Hilman
2017-01-31 22:44 ` Kevin Hilman
2017-02-01 0:36 ` Kevin Hilman
2017-02-01 0:36 ` Kevin Hilman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.