[virtio-comment] Re: [virtio-dev] [PATCH v8 8/8] virtio-net: Describe RSS using rss rq id

[David Edmondson <david.edmondson@oracle.com>]

Parav Pandit <parav@nvidia.com> writes:

> The content of indirection table and unclassified_queue which are
> based on math calculation historically. To better describe this, to
> avoid intermixing array index with virtqueue index and to use virtqueue
> number
>
> introduce a field rq_handle (receive queue handle) and refer them
> to describe unclassified_queue and indirection_table fields.
>
> As part of it, have the example that uses non zero virtqueue
> number which helps to have better mapping between receiveX
> object with virtqueue number and the actual value in the
> indirection table.
>
> Fixes: https://github.com/oasis-tcs/virtio-spec/issues/163
> Signed-off-by: Parav Pandit <parav@nvidia.com>
>
> ---
> changelog:
> v4->v5:
> - change subject to reflect rss_rq_id
> - fixed accidental removal of "unclassifed packets".
> - simplfied text around indirection_table mask to use the term
>   destination receive virtqueue. This aligns with next line about queue
>   reset.
> - removed rss_rq_id references as indirection table and
>   unclassified_queue data type is self explanatory
> v3->v4:
> - renamed rq_handle to rss_rq_id
> - moved rss_rq_id definition close to its usage in rss_config struct
> v2->v3:
> - moved rq_handle definition before using it
> - removed duplicate example as rq_handle is now described first
> v0->v1:
> - new patch suggested by Michael Tsirkin
> ---
>  device-types/net/description.tex | 26 +++++++++++++++++++-------
>  1 file changed, 19 insertions(+), 7 deletions(-)
>
> diff --git a/device-types/net/description.tex b/device-types/net/description.tex
> index 435c1fc..d6dd897 100644
> --- a/device-types/net/description.tex
> +++ b/device-types/net/description.tex
> @@ -1423,11 +1423,16 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  
>  Driver sends a VIRTIO_NET_CTRL_MQ_RSS_CONFIG command using the following format for \field{command-specific-data}:
>  \begin{lstlisting}
> +struct rss_rq_id {
> +   le16 vqn_1_16: 15; /* Bits 1 to 16 of the virtqueue number */
> +   le16 reserved: 1; /* Set to zero */
> +};
> +
>  struct virtio_net_rss_config {
>      le32 hash_types;
>      le16 indirection_table_mask;
> -    le16 unclassified_queue;
> -    le16 indirection_table[indirection_table_length];
> +    struct rss_rq_id unclassified_queue;
> +    struct rss_rq_id indirection_table[indirection_table_length];
>      le16 max_tx_vq;
>      u8 hash_key_length;
>      u8 hash_key_data[hash_key_length];
> @@ -1442,10 +1447,14 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  \field{indirection_table} array.
>  Number of entries in \field{indirection_table} is (\field{indirection_table_mask} + 1).
>  
> -Field \field{unclassified_queue} contains the 0-based index of
> -the receive virtqueue to place unclassified packets in. Index 0 corresponds to receiveq1.
> +\field{rss_rq_id} is a receive virtqueue id. \field{vqn_1_16}
> +consists of bits 1 to 16 of virtqueue number. For example,
> +\field{vqn_1_16} value of 3 corresponds to virtqueue number 6 maps to receiveq4.

\field{rss_rq_id} is a receive virtqueue id. \field{vqn_1_16} consists
of bits 1 to 16 of a virtqueue number. For example, a \field{vqn_1_16}
value of 3 corresponds to virtqueue number 6, which maps to receiveq4.

> +
> +Field \field{unclassified_queue} contains the receive virtqueue
> +to place unclassified packets in.

Field \field{unclassified_queue} contains the receive virtqueue in which
to place unclassified packets.

> -Field \field{indirection_table} contains an array of 0-based indices of receive virtqueues. Index 0 corresponds to receiveq1.
> +Field \field{indirection_table} is an array of receive virtqueues.
>  
>  A driver sets \field{max_tx_vq} to inform a device how many transmit virtqueues it may use (transmitq1\ldots transmitq \field{max_tx_vq}).
>  
> @@ -1455,7 +1464,8 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  
>  A driver MUST NOT send the VIRTIO_NET_CTRL_MQ_RSS_CONFIG command if the feature VIRTIO_NET_F_RSS has not been negotiated.
>  
> -A driver MUST fill the \field{indirection_table} array only with indices of enabled queues. Index 0 corresponds to receiveq1.
> +A driver MUST fill the \field{indirection_table} array only with
> +enabled receive virtqueues.
>  
>  The number of entries in \field{indirection_table} (\field{indirection_table_mask} + 1) MUST be a power of two.
>  
> @@ -1468,7 +1478,9 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  \begin{itemize}
>  \item Calculate the hash of the packet as defined in \ref{sec:Device Types / Network Device / Device Operation / Processing of Incoming Packets / Hash calculation for incoming packets}.
>  \item If the device did not calculate the hash for the specific packet, the device directs the packet to the receiveq specified by \field{unclassified_queue} of virtio_net_rss_config structure.
> -\item Apply \field{indirection_table_mask} to the calculated hash and use the result as the index in the indirection table to get 0-based number of destination receiveq.
> +\item Apply \field{indirection_table_mask} to the calculated hash
> +and use the result as the index in the indirection table to get
> +the destination receive virtqueue.
>  \item If the destination receive queue is being reset (See \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Virtqueue Reset}), the device MUST drop the packet.
>  \end{itemize}
>  
> -- 
> 2.26.2
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
-- 
Tonight I think I'll walk alone, I'll find my soul as I go home.

This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: virtio-comment-subscribe@lists.oasis-open.org
Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org
List help: virtio-comment-help@lists.oasis-open.org
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/