All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: Paulo Marques <pmarques@grupopie.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [RFC] kallsyms C_SYMBOL_PREFIX support
Date: Wed, 13 Apr 2005 12:58:40 +0900	[thread overview]
Message-ID: <m2sm1ve39r.wl%ysato@users.sourceforge.jp> (raw)
In-Reply-To: <425BB466.4030209@grupopie.com>

At Tue, 12 Apr 2005 12:43:34 +0100,
Paulo Marques wrote:
> 
> Yoshinori Sato wrote:
> > kallsyms does not consider SYMBOL_PREFIX of C.
> > Consequently do not work in architecture using prefix character (h8300, v850) really.
> > 
> > Because I can want to use this, I made a patch.
> > Please comment.
> > 
> > [...]
> 
> > @@ -177,6 +184,11 @@
> >  		"_SDA2_BASE_",		/* ppc */
> >  		NULL };
> >  	int i;
> > +	int offset = 1;
> > +
> > +	/* skip prefix char */
> > +	if (symbol_prefix_char && *(s->sym + 1) == symbol_prefix_char)
> > +		offset++;
> 
> maybe something like:
> 
> char *sname;
> sname = s->sym + 1;
> if (symbol_prefix_char && *(s->sym + 1) == symbol_prefix_char)
> 	sname++;
> 
> would avoid all the "(s->sym + offset)" below, turning them to just "sname".
> 
> I know that it was "(s->sym + 1)" before, so its really not your fault, 
> but you could take this opportunity to clean that up, too.

This one is fine.
 
> >  
> >  	/* if --all-symbols is not specified, then symbols outside the text
> >  	 * and inittext sections are discarded */
> > @@ -190,17 +202,17 @@
> >  		 * they may get dropped in pass 2, which breaks the kallsyms
> >  		 * rules.
> >  		 */
> > -		if ((s->addr == _etext && strcmp(s->sym + 1, "_etext")) ||
> > -		    (s->addr == _einittext && strcmp(s->sym + 1, "_einittext")))
> > +		if ((s->addr == _etext && strcmp(s->sym + offset, "_etext")) ||
> > +		    (s->addr == _einittext && strcmp(s->sym + offset, "_einittext")))
> >  			return 0;
> >  	}
> >  
> >  	/* Exclude symbols which vary between passes. */
> > -	if (strstr(s->sym + 1, "_compiled."))
> > +	if (strstr(s->sym + offset, "_compiled."))
> >  		return 0;
> >  
> >  	for (i = 0; special_symbols[i]; i++)
> > -		if( strcmp(s->sym + 1, special_symbols[i]) == 0 )
> > +		if( strcmp(s->sym + offset, special_symbols[i]) == 0 )
> >  			return 0;
> >  
> >  	return 1;
> > @@ -225,9 +237,15 @@
> 
> >  [...]
> >  
> >  /* uncompress a compressed symbol. When this function is called, the best table
> > @@ -665,6 +683,13 @@
> >  
> >  	insert_real_symbols_in_table();
> >  
> > +	/* When valid symbol is not registered, exit to error */
> > +	if (good_head.left == good_head.right &&
> > +	    bad_head.left == bad_head.right) {
> > +		fprintf(stderr, "No valid symbol.\n");
> > +		exit(1);
> > +	}
> > +
> >  	optimize_result();
> >  }
> 
> This should only trigger if there are no symbols at all, or if there are 
> some symbols that are considered invalid, and do not go into the final 
> result.
> 
> Maybe we should just do a return here instead of exit, so that even if 
> this happens, kallsyms will still produce an empty result, that will at 
> least allow the kernel to compile.
> 
> It should give the error output to warn the user that there is something 
> fishy, nevertheless. Maybe even a bigger message, since this should not 
> happen at all, and if this triggers it means that something is seriously 
> wrong.

Not surely possible normally.
But raise SEGV if there is not a check. I do not think that this is good action.
 
> > @@ -672,9 +697,21 @@
> >  int
> >  main(int argc, char **argv)
> >  {
> > -	if (argc == 2 && strcmp(argv[1], "--all-symbols") == 0)
> > -		all_symbols = 1;
> > -	else if (argc != 1)
> > +	if (argc >= 2) {
> 
> This test is unnecessary.
> 
> > +		int i;
> > +		for (i = 1; i < argc; i++) { 
> > +			if(strcmp(argv[i], "--all-symbols") == 0)
> > +				all_symbols = 1;
> > +			else if (strncmp(argv[i], "--symbol-prefix=", 16) == 0) {
> > +				char *p = &argv[i][16];
> > +				/* skip quote */
> > +				if ((*p == '"' && *(p+2) == '"') || (*p == '\'' && *(p+2) == '\''))
> > +					p++;
> > +				symbol_prefix_char = *p;
> > +			} else
> > +				usage();
> > +		}
> > +	} else if (argc != 1)
> >  		usage();
> 
> and so is this.
> 
> >  
> >  	read_map(stdin);
> > @@ -683,4 +720,3 @@
> >  
> >  	return 0;
> >  }
> 
> At least the patch seems to not affect architectures that don't use the 
> "--symbol-prefix" option, so it should be harmless for most.

I think of the same thread which are an issue with it being worked if do not appoint "--symbol-prefix".
Use CONFIG_ARCH and may judge it, but will it be good to refer to include/linux here?
 
> Anyway, appart from the few comments, it has my acknowledge.
> 
> -- 
> Paulo Marques - www.grupopie.com
> 
> All that is necessary for the triumph of evil is that good men do nothing.
> Edmund Burke (1729 - 1797)

-- 
Yoshinori Sato
<ysato@users.sourceforge.jp>

      reply	other threads:[~2005-04-13  4:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-12  7:06 [RFC] kallsyms C_SYMBOL_PREFIX support Yoshinori Sato
2005-04-12 11:43 ` Paulo Marques
2005-04-13  3:58   ` Yoshinori Sato [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m2sm1ve39r.wl%ysato@users.sourceforge.jp \
    --to=ysato@users.sourceforge.jp \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmarques@grupopie.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.