From mboxrd@z Thu Jan 1 00:00:00 1970 From: Urs Thuermann Message-Id: Subject: [linux-lvm] Q: allocation of PEs to LVs Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Mon Feb 4 07:15:02 2002 List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-lvm@sistina.com How are PEs allocated when LVs are created using lvcreate? I created a LV unsing lvcreate from LVM-1.0.1 on an empty VG and was surprised that PEs are allocated starting with PE 1 and not PE 0 as I expected: isnogud:root# pvcreate /dev/sdd1 pvcreate -- physical volume "/dev/sdd1" successfully created isnogud:root# vgcreate vg1 /dev/sdd1 vgcreate -- INFO: using default physical extent size 4.00 MB vgcreate -- INFO: maximum logical volume size is 255.99 Gigabyte vgcreate -- doing automatic backup of volume group "vg1" vgcreate -- volume group "vg1" successfully created and activated isnogud:root# lvcreate -n test vg1 -L32M lvcreate -- doing automatic backup of "vg1" lvcreate -- logical volume "/dev/vg1/test" successfully created isnogud:root# lvdisplay -v /dev/vg1/test --- Logical volume --- LV Name /dev/vg1/test VG Name vg1 LV Write Access read/write LV Status available LV # 1 # open 0 LV Size 32.00 MB Current LE 8 Allocated LE 8 Allocation next free Read ahead sectors 10000 Block device 58:11 --- Distribution of logical volume on 1 physical volume --- PV Name PE on PV reads writes /dev/sdd1 8 0 4 --- logical volume i/o statistic --- 0 reads 4 writes --- Logical extents --- LE PV PE reads writes 00000 /dev/sdd1 00001 0 4 00001 /dev/sdd1 00002 0 0 00002 /dev/sdd1 00003 0 0 00003 /dev/sdd1 00004 0 0 00004 /dev/sdd1 00005 0 0 00005 /dev/sdd1 00006 0 0 00006 /dev/sdd1 00007 0 0 00007 /dev/sdd1 00008 0 0 isnogud:root# The first LV in my other VG starts at PE 0 as expected. I created that VG and LVs using vgcreate and lvcreate from LVM-0.9.1_beta7: isnogud:root# lvdisplay -v /dev/vg0/root --- Logical volume --- LV Name /dev/vg0/root VG Name vg0 LV Write Access read/write LV Status available LV # 1 # open 1 LV Size 128.00 MB Current LE 32 Allocated LE 32 Stripes 2 Stripe size (KByte) 4 Allocation next free Read ahead sectors 120 Block device 58:0 --- Distribution of logical volume on 2 physical volumes --- PV Name PE on PV reads writes /dev/sda2 16 41814 100298 /dev/sdb2 16 42184 161941 --- logical volume i/o statistic --- 83998 reads 262239 writes --- Logical extents --- LE PV PE reads writes 00000 /dev/sda2 00000 2814 663 00001 /dev/sda2 00001 978 24114 ... 00014 /dev/sda2 00014 1955 223 00015 /dev/sda2 00015 4050 277 00016 /dev/sdb2 00000 2835 634 00017 /dev/sdb2 00001 946 72276 ... 00030 /dev/sdb2 00014 1984 205 00031 /dev/sdb2 00015 4083 311 isnogud:root# Can someone explain this, please? Is it intentional? Also, the "Read ahead sectors" seem to have changed from 120 to 10000, which seems quite a lot to me. 10000 sectors is roughly 5 MB. Does every read really cause the next 5 MB to be read from the disk(s)? urs