From: James Cloos <cloos@jhcloos.com>
To: "Huang, Shane" <Shane.Huang@amd.com>
Cc: linux-ide@vger.kernel.org, "Xu, Andiry" <Andiry.Xu@amd.com>,
"Petkov, Borislav" <Borislav.Petkov@amd.com>
Subject: Re: AMD 890GX vs 6Gbps SATA?
Date: Mon, 15 Nov 2010 11:31:36 -0500 [thread overview]
Message-ID: <m339r2lf9b.fsf@jhcloos.com> (raw)
In-Reply-To: <1E8B869C0C6913418421A406C094DF7C82D812@sshaexmb1.amd.com> (Shane Huang's message of "Mon, 15 Nov 2010 15:45:19 +0800")
[-- Attachment #1: Type: text/plain, Size: 3792 bytes --]
>>>>> "HS" == Huang, Shane <Shane.Huang@amd.com> writes:
HS> Can you send us your full dmesg and lspci?
lspci is:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:15.0 PCI bridge: ATI Technologies Inc Device 43a0
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS880 [Radeon HD 4290]
01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
04:05.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
05:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 05)
05:05.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 05)
06:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
The verbose output for 00:11.0 is:
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device 7642
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 8000 [size=4]
Region 2: I/O ports at 7000 [size=8]
Region 3: I/O ports at 6000 [size=4]
Region 4: I/O ports at 5000 [size=16]
Region 5: Memory at fe2ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4159
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
And the dmesg, compressed to fit, is attached:
[-- Attachment #2: Gzip(1)ed dmesg --]
[-- Type: application/octet-stream, Size: 12099 bytes --]
[-- Attachment #3: Type: text/plain, Size: 612 bytes --]
(Heh. The gzip is smaller than the bzip2.)
(The carbon1 in the kernel version is a .config tracking localversion.)
HS> I submitted one patch to support SATA AHCI 6Gbps message
HS> in 2008, does your kernel contain it?
HS> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commi
HS> t;h=8522ee25f3a645577d41e71328cd4fcf8610dfeb
I currently run the v2.6.36 tag on that box; newer kernels have a pty
deadlock (in bz). That commit is in the tree, but the function it
changed has since moved from ahci.c to libahci.c.
-JimC
--
James Cloos <cloos@jhcloos.com> OpenPGP: 1024D/ED7DAEA6
next prev parent reply other threads:[~2010-11-15 16:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <2DEEA3AB13739D45A22ADDB5086AEA0B915107@sshaexmb1.amd.com>
2010-11-15 7:45 ` AMD 890GX vs 6Gbps SATA? Huang, Shane
2010-11-15 16:31 ` James Cloos [this message]
2010-11-15 17:02 ` Huang, Shane
2010-11-15 17:11 ` James Cloos
[not found] ` <4CE179B4.4090404@hardwarefreak.com>
[not found] ` <m3fwv2ju9y.fsf@jhcloos.com>
2010-11-15 19:33 ` Stan Hoeppner
2010-11-15 19:40 ` James Cloos
2010-11-16 14:31 ` Mark Lord
2010-11-16 10:04 ` Huang, Shane
2010-11-17 0:31 ` Stan Hoeppner
2010-11-17 0:38 ` Stan Hoeppner
2010-11-17 2:48 ` Huang, Shane
2010-11-14 17:50 James Cloos
2010-11-15 4:08 ` Jeff Garzik
2010-11-15 16:39 ` James Cloos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m339r2lf9b.fsf@jhcloos.com \
--to=cloos@jhcloos.com \
--cc=Andiry.Xu@amd.com \
--cc=Borislav.Petkov@amd.com \
--cc=Shane.Huang@amd.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.