From: Krzysztof Halasa <khc@pm.waw.pl>
To: Xavier Bestel <xavier.bestel@free.fr>
Cc: linux-kernel@vger.kernel.org
Subject: Re: No PCI-X / PCI-E cards ...
Date: Fri, 18 Dec 2009 16:26:01 +0100 [thread overview]
Message-ID: <m363841eye.fsf@intrepid.localdomain> (raw)
In-Reply-To: <1261089592.8827.5.camel@bip> (Xavier Bestel's message of "Thu, 17 Dec 2009 23:39:52 +0100")
Xavier Bestel <xavier.bestel@free.fr> writes:
>> I first plugged a wifi PCI card into a PCI-X slot (there's no PCI slot),
>> it didn't appear in lspci. As I thought it was a voltage problem (PCI-X
>> only accept 3.3v, not 5v IIRC)
The card has to force 33 MHz non-PCI-X mode. I'd check if the "pins" 38B
(PCIXCAP) and 49B (M66EN) are both connected to GND. Also you can try
inserting another PCI card into another PCI-X slot (in the same bus
segment), this may force 33 PCI mode (check if the other card is
detected).
--
Krzysztof Halasa
next prev parent reply other threads:[~2009-12-18 15:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-16 15:57 No PCI-X / PCI-E cards on Intel Bigby-P MCH / ICH9R Xavier Bestel
2009-12-17 22:39 ` No PCI-X / PCI-E cards Xavier Bestel
2009-12-17 22:43 ` Roland Dreier
2009-12-18 9:02 ` Xavier Bestel
2009-12-22 10:30 ` Xavier Bestel
2009-12-23 13:04 ` Xavier Bestel
2009-12-24 16:01 ` Roland Dreier
2009-12-28 16:58 ` Xavier Bestel
2009-12-18 15:26 ` Krzysztof Halasa [this message]
2009-12-29 9:05 ` Xavier Bestel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m363841eye.fsf@intrepid.localdomain \
--to=khc@pm.waw.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=xavier.bestel@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.