From: John Covici <covici@ccs.covici.com>
To: linux-kernel@vger.kernel.org
Subject: problems with multitech 4 port serial card under 2.4.x and 2.6.x
Date: Fri, 17 Sep 2004 05:19:30 -0400 [thread overview]
Message-ID: <m3656di76l.fsf@ccs.covici.com> (raw)
I have had problems with the multitech 4 port serial card under both
the 2.4 and the 2.6 Linux kernels.
I guess the most important problem is that the driver module does not
detect the card at all -- the only driver whichworks is the one from
multitech itself. Here is the lspci -v entry for the card.
0000:00:0e.0 Serial controller: Exar Corp. XR17C158 Octal UART (rev
01) (prog-if 02 [16550])
Subsystem: Unknown device 2205:2001
Flags: fast devsel, IRQ 7
Memory at fba00000 (32-bit, non-prefetchable) [size=2K]
Now also, I have an Asus a8V and if I have the apic support for uni
processors on it won't even boot with the card installed.
Any assistance on these matters would be appreciated -- especially
Any assistance on these matters would be appreciated.
--
John Covici
covici@ccs.covici.com
next reply other threads:[~2004-09-17 9:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-17 9:19 John Covici [this message]
2004-09-17 9:33 ` problems with multitech 4 port serial card under 2.4.x and 2.6.x Russell King
2004-09-17 9:39 ` John covici
2004-09-17 11:49 ` John covici
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3656di76l.fsf@ccs.covici.com \
--to=covici@ccs.covici.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.