From: Mathieu Chouquet-Stringer <ml2news@free.fr>
To: linux-scsi@vger.kernel.org
Subject: Dead Adaptec AHA-2940U2/U2W while ripping a CD
Date: 26 Jan 2006 18:39:13 +0100 [thread overview]
Message-ID: <m3acdi99dq.fsf_-_@localhost.localdomain> (raw)
In-Reply-To: <Pine.LNX.4.64.0601261138500.23310@localhost.localdomain>
Hello,
I was ripping a (copy protected) cd on my alpha and got the following
stuff (see below). At that point, the box failed to respond and because I
don't have a console, I rebooted it.
Kernel version is (vanilla 2.6.15):
Linux alpha 2.6.15 #1 Sat Jan 7 16:32:48 CET 2006 alpha EV56 EB164 GNU/Linux
Here's the lspci entry for the card:
01:01.0 SCSI storage controller: Adaptec AHA-2940U2/U2W
Subsystem: Adaptec AHA-2940U2 SCSI Controller
Flags: bus master, medium devsel, latency 32, IRQ 26
BIST result: 00
I/O ports at 9000 [disabled] [size=256]
Memory at 09200000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 09640000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
If you want me to test anything let me know.
Cheers,
Jan 26 18:23:06 alpha sr 1:0:6:0: Attempting to queue an ABORT message
Jan 26 18:23:06 alpha CDB: 0xbe 0x4 0x0 0x2 0x78 0x11 0x0 0x0 0x5 0xf8 0x0 0x0
Jan 26 18:23:06 alpha scsi1: At time of recovery, card was not paused
Jan 26 18:23:06 alpha >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Jan 26 18:23:06 alpha scsi1: Dumping Card State while idle, at SEQADDR 0x9
Jan 26 18:23:06 alpha Card was paused
Jan 26 18:23:06 alpha ACCUM = 0x0, SINDEX = 0x0, DINDEX = 0xe4, ARG_2 = 0x0
Jan 26 18:23:06 alpha HCNT = 0x0 SCBPTR = 0x1d
Jan 26 18:23:06 alpha SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE)
Jan 26 18:23:06 alpha SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0xa]:(SELWIDE|SELBUSB)
Jan 26 18:23:06 alpha SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED)
Jan 26 18:23:06 alpha SSTAT0[0x0] SSTAT1[0xa]:(PHASECHG|BUSFREE) SSTAT2[0x0]
Jan 26 18:23:06 alpha SSTAT3[0x0] SIMODE0[0x8]:(ENSWRAP) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
Jan 26 18:23:06 alpha SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Jan 26 18:23:06 alpha STACK: 0x0 0x167 0x10d 0x3
Jan 26 18:23:06 alpha SCB count = 56
Jan 26 18:23:06 alpha Kernel NEXTQSCB = 19
Jan 26 18:23:06 alpha Card NEXTQSCB = 19
Jan 26 18:23:06 alpha QINFIFO entries:
Jan 26 18:23:06 alpha Waiting Queue entries:
Jan 26 18:23:06 alpha Disconnected Queue entries: 18:24
Jan 26 18:23:06 alpha QOUTFIFO entries:
Jan 26 18:23:06 alpha Sequencer Free SCB List: 29 0 24 13 5 10 6 8 21 19 4 11 1 7 23 26 15 9 12 28 3 31 25 16 27 17 30 20 22 14 2
Jan 26 18:23:06 alpha Sequencer SCB Info:
Jan 26 18:23:06 alpha 0 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 1 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 2 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 3 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 4 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 5 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 6 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 7 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 8 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 9 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 10 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 11 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 12 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 13 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 14 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 15 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 16 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 17 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 18 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x67]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0x18]
Jan 26 18:23:06 alpha 19 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 20 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 21 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 22 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 23 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 24 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 25 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x27]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 26 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 27 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 28 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 29 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 30 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha 31 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x7]
Jan 26 18:23:06 alpha SCB_LUN[0x0] SCB_TAG[0xff]
Jan 26 18:23:06 alpha Pending list:
Jan 26 18:23:06 alpha 24 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
Jan 26 18:23:06 alpha Kernel Free SCB list: 0 35 47 42 40 46 10 12 20 26 31 3 7 14 8 18 27 17 34 15 21 5 33 1 11 29 23 25 6 30 38 16 4 9 39 13 41 43 54 44 45 37 32 55 28 22 36 2 53 52 51 50 49 48
Jan 26 18:23:06 alpha Untagged Q(6): 24
Jan 26 18:23:06 alpha
Jan 26 18:23:06 alpha <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Jan 26 18:23:06 alpha (scsi1:A:6:0): Device is disconnected, re-queuing SCB
Jan 26 18:23:06 alpha (scsi1:A:6:0): Abort Message Sent
Jan 26 18:23:06 alpha Recovery code sleeping
Jan 26 18:23:11 alpha Recovery code awake
Jan 26 18:23:11 alpha Timer Expired
Jan 26 18:23:11 alpha aic7xxx_abort returns 0x2003
Jan 26 18:23:11 alpha sr 1:0:6:0: Attempting to queue a TARGET RESET message
Jan 26 18:23:11 alpha CDB: 0xbe 0x4 0x0 0x2 0x78 0x11 0x0 0x0 0x5 0xf8 0x0 0x0
Jan 26 18:23:11 alpha aic7xxx_dev_reset returns 0x2003
Jan 26 18:23:11 alpha Recovery SCB completes
--
Mathieu Chouquet-Stringer
"Le disparu, si l'on vénère sa mémoire, est plus présent et
plus puissant que le vivant".
-- Antoine de Saint-Exupéry, Citadelle --
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2006-01-26 17:39 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-24 10:42 SCSI tape access on 2.6 kernels? Gerhard Schneider
2006-01-24 12:56 ` Gerhard Schneider
2006-01-24 17:52 ` Chip Coldwell
2006-01-24 20:23 ` Patrick Mansfield
2006-01-24 20:36 ` Chip Coldwell
2006-01-25 21:10 ` Kai Makisara
2006-01-26 16:11 ` Chip Coldwell
2006-01-26 16:39 ` Chip Coldwell
2006-01-26 17:39 ` Mathieu Chouquet-Stringer [this message]
2006-01-26 21:54 ` Kai Makisara
2006-01-27 15:40 ` Chip Coldwell
2006-01-27 17:56 ` Kai Makisara
2006-01-24 20:56 ` Kai Makisara
2006-01-24 20:58 ` Chip Coldwell
2006-01-24 21:01 ` Gerhard Schneider
2006-01-25 16:08 ` Chip Coldwell
2006-01-25 16:25 ` Denny Page
2006-01-25 19:03 ` Gerhard Schneider
2006-01-24 19:43 ` Denny Page
2006-01-24 20:50 ` Kai Makisara
2006-01-24 21:12 ` Gerhard Schneider
2006-01-25 21:26 ` Kai Makisara
-- strict thread matches above, loose matches on Subject: below --
2006-01-27 11:28 Dead Adaptec AHA-2940U2/U2W while ripping a CD emmanuel.fuste
2006-01-27 14:26 ` Mathieu Chouquet-Stringer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3acdi99dq.fsf_-_@localhost.localdomain \
--to=ml2news@free.fr \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.