From: "Krzysztof Hałasa" <khalasa@piap.pl>
To: Jacopo Mondi <jacopo@jmondi.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@iki.fi>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org
Subject: Re: [PATCH 06/10] media: ar0521: Configure pixel rate using LINK_FREQ
Date: Fri, 07 Oct 2022 07:52:51 +0200 [thread overview]
Message-ID: <m3edvk5gek.fsf@t19.piap.pl> (raw)
In-Reply-To: <20221005190613.394277-7-jacopo@jmondi.org> (Jacopo Mondi's message of "Wed, 5 Oct 2022 21:06:09 +0200")
Jacopo Mondi <jacopo@jmondi.org> writes:
> Now that the V4L2_LINK_FREQUENCY control is available, use it to
> configure the sensor pixel rate.
>
> Adjust the default pixel rate to match the first listed link_frequency.
> @@ -330,10 +333,21 @@ static u32 calc_pll(struct ar0521_dev *sensor, u32 freq, u16 *pre_ptr, u16 *mult
> static void ar0521_calc_mode(struct ar0521_dev *sensor)
> {
> unsigned int pixel_clock;
> + unsigned int link_freq;
> + s64 frequency;
> + u32 pixel_rate;
> u16 pre, mult;
> u32 vco;
> int bpp;
>
> + /* Update the PIXEL_RATE value using the desired link_frequency. */
> + bpp = ar0521_code_to_bpp(sensor);
> + link_freq = sensor->ctrls.link_freq->val;
> + frequency = ar0521_link_frequencies[link_freq];
> + pixel_rate = frequency * sensor->lane_count * 2 / bpp;
Must be that div64 thing.
> +
> + __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixrate, pixel_rate);
> +
--
Krzysztof "Chris" Hałasa
Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa
next prev parent reply other threads:[~2022-10-07 5:52 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-05 19:06 [PATCH 00/10] media: ar0521: Add analog gain, rework clock tree Jacopo Mondi
2022-10-05 19:06 ` [PATCH 01/10] media: ar0521: Implement enum_frame_sizes Jacopo Mondi
2022-10-06 14:37 ` Dave Stevenson
2022-10-06 16:33 ` Laurent Pinchart
2022-10-07 4:57 ` Krzysztof Hałasa
2022-10-07 8:08 ` Laurent Pinchart
2022-10-07 7:29 ` Jacopo Mondi
2022-10-07 8:11 ` Laurent Pinchart
2022-10-07 10:32 ` Dave Stevenson
2022-10-07 12:05 ` Sakari Ailus
2022-10-07 12:12 ` Laurent Pinchart
2022-10-05 19:06 ` [PATCH 02/10] media: ar0521: Add V4L2_CID_ANALOG_GAIN Jacopo Mondi
2022-10-06 14:44 ` Dave Stevenson
2022-10-06 15:00 ` Jacopo Mondi
2022-10-06 15:05 ` Laurent Pinchart
2022-10-07 5:28 ` Krzysztof Hałasa
2022-10-07 8:20 ` Laurent Pinchart
2022-10-12 18:54 ` Sakari Ailus
2022-10-13 9:30 ` Laurent Pinchart
2022-10-07 5:20 ` Krzysztof Hałasa
2022-10-07 7:17 ` Jacopo Mondi
2022-10-07 8:30 ` Laurent Pinchart
2022-10-07 12:01 ` Krzysztof Hałasa
2022-10-07 12:07 ` Laurent Pinchart
2022-10-07 14:02 ` Krzysztof Hałasa
2022-10-17 15:10 ` Jacopo Mondi
2022-10-17 15:57 ` Sakari Ailus
2022-10-17 16:31 ` Jacopo Mondi
2022-10-17 16:37 ` Sakari Ailus
2022-10-17 16:42 ` Dave Stevenson
2022-10-07 11:56 ` Krzysztof Hałasa
2022-10-07 12:11 ` Laurent Pinchart
2022-10-07 14:00 ` Krzysztof Hałasa
2022-10-05 19:06 ` [PATCH 03/10] media: ar0521: Set maximum resolution to 2592x1944 Jacopo Mondi
2022-10-06 14:57 ` Dave Stevenson
2022-10-07 13:06 ` Laurent Pinchart
2022-10-20 11:23 ` Jacopo Mondi
2022-10-07 5:33 ` Krzysztof Hałasa
2022-10-07 12:42 ` Jacopo Mondi
2022-10-07 14:07 ` Krzysztof Hałasa
2022-10-05 19:06 ` [PATCH 04/10] media: ar0521: Rework PLL computation Jacopo Mondi
2022-10-07 13:56 ` Laurent Pinchart
2022-10-12 19:02 ` Sakari Ailus
2022-10-13 9:31 ` Laurent Pinchart
2022-10-05 19:06 ` [PATCH 05/10] media: ar0521: Add LINK_FREQ control Jacopo Mondi
2022-10-06 15:10 ` Dave Stevenson
2022-10-07 14:01 ` Laurent Pinchart
2022-10-07 14:26 ` Dave Stevenson
2022-10-16 1:53 ` Laurent Pinchart
2022-10-17 11:21 ` Dave Stevenson
2022-10-17 9:24 ` Jacopo Mondi
2022-10-17 11:00 ` Dave Stevenson
2022-10-17 12:00 ` Jacopo Mondi
2022-10-05 19:06 ` [PATCH 06/10] media: ar0521: Configure pixel rate using LINK_FREQ Jacopo Mondi
2022-10-06 5:51 ` kernel test robot
2022-10-06 15:42 ` Sakari Ailus
2022-10-07 7:25 ` Jacopo Mondi
2022-10-07 5:52 ` Krzysztof Hałasa [this message]
2022-10-05 19:06 ` [PATCH 07/10] media: ar0521: Adjust exposure and blankings limits Jacopo Mondi
2022-10-06 2:08 ` kernel test robot
2022-10-06 4:17 ` kernel test robot
2022-10-06 15:41 ` Dave Stevenson
2022-10-05 19:06 ` [PATCH 08/10] media: ar0521: Setup controls at s_stream time Jacopo Mondi
2022-10-06 15:43 ` Dave Stevenson
2022-10-07 7:23 ` Jacopo Mondi
2022-10-05 19:06 ` [PATCH 09/10] media: ar0521: Rework startup sequence Jacopo Mondi
2022-10-06 15:45 ` Dave Stevenson
2022-10-05 19:06 ` [PATCH 10/10] media: ar0521: Tab-align definitions Jacopo Mondi
2022-10-06 15:48 ` Dave Stevenson
2022-10-06 16:11 ` Laurent Pinchart
2022-10-07 5:42 ` Krzysztof Hałasa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3edvk5gek.fsf@t19.piap.pl \
--to=khalasa@piap.pl \
--cc=jacopo@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.