From: Jeff Coffin <jcoffin@sv.usweb.com>
To: ulfc@thepuffingroup.com
Cc: linux@cthulhu.engr.sgi.com
Subject: RE: Yet Closer
Date: 01 May 1999 16:40:54 -0700 [thread overview]
Message-ID: <m3n1zouznd.fsf@chuck.sv.usweb.com> (raw)
> Don't you see anything at all, or does it hang after freeing PROM
> memory? There was a problem with the PROM memory freeing on newer
> PROM's, which Thomas recently solved. I don't think he has uploaded
> a new kernel since then..
> I can probably upload a new one if this is your problem.
I think it's something else. Here's what I get (this is from ralf's
suggestion, didn't quite work for me) :
>> boot vmlinux root=/dev/sdb1 init=/bin/sh
115360+19584+3136+334528+42744d+4248+6368 entry: 0x8bfa8850
ARCH: SGI-IP22
PROMLIB: SGI ARCS firmware Version 1 Revision 10
PROMLIB: Total free ram 65839104 bytes (64296K,62MB)
CPU: MIPS-R5000 FPU<MIPS-R5000FPC> ICACHE DCACHE SCACHE
Loading R4000 MMU routines.
CPU revision is: 00002310
Primary instruction cache 32kb, linesize 32 bytes)
Primary data cache 32kb, linesize 32 bytes)
Linux version 2.2.1 (tsbogend@james.franken.de) (gcc version 2.7.2.3) #519 Mon 9
MC: SGI memory controller Revision 3
R4600/R5000 SCACHE size 512K, linesize 32 bytes.
calculating r4koff... 000dbd55(900437)
zs0: console input
Console: ttyS0 (Zilog8530)
Calibrating delay loop... 179.81 BogoMIPS
Memory: 60908k/196140k available (1172k kernel code, 2208k data)
Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
initialize_kbd: Keyboard reset failed, no ACK
SGI Zilog8530 serial driver version 1.00
Keyboard timeout[2]
Keyboard timeout[2]
tty00 at 0xbfbd9830 (irq = 21) is a Zilog8530
tty01 at 0xbfbd9838 (irq = 21) is a Zilog8530
pty: 256 Unix98 ptys configured
DS1286 Real Time Clock Driver v1.0
streamable misc devices registered (keyb:150, gfx:148)
RAM disk driver initialized: 16 RAM disks of 4096K size
wd33c93-0: chip=WD33c93B/13 no_sync=0xff no_dma=0 debug_flags=0x00
setup_args=,,,,,,,,,
Version 1.25 - 09/Jul/1997, Compiled Mar 29 1999 at 01:13:15
scsi0 : SGI WD93
scsi : 1 host. sending SDTR 0103013f0csync_xfer=2c Vendor: SGI Model: IBM DORS-32160 D
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 2, lun 0
sending SDTR 0103013f0csync_xfer=2c Vendor: SEAGATE Model: ST31055N 2
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 3, lun 0
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4197405 [2049 MB] [2.0 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2069860 [1010 MB] [1.0 GB]
sgiseeq.c: David S. Miller (dm@engr.sgi.com)
eth0: SGI Seeq8003 08:00:69:0a:43:7c
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.254.20, my address is 192.168.254.30
Partition check:
sda: sda1 sda2 sda3 sda4
sdb: sdb1 sdb2 sdb3 sdb4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing prom memory: 0k freed
Freeing unused kernel memory: 52k freed
Warning: unable to open an initial console.
--jeff
next reply other threads:[~1999-05-01 23:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-05-01 23:40 Jeff Coffin [this message]
1999-05-02 0:14 ` Yet Closer Thomas Bogendoerfer
-- strict thread matches above, loose matches on Subject: below --
1999-05-02 4:10 Jeff Coffin
1999-05-01 19:39 Yet closer jcoffin
1999-05-01 21:52 ` Ralf Baechle
1999-05-02 10:24 ` Richard Hartensveld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3n1zouznd.fsf@chuck.sv.usweb.com \
--to=jcoffin@sv.usweb.com \
--cc=linux@cthulhu.engr.sgi.com \
--cc=ulfc@thepuffingroup.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.