All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rui Miguel Silva <rui.silva@linaro.org>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Prabhakar Lad <prabhakar.csengg@gmail.com>,
	Akinobu Mita <akinobu.mita@gmail.com>,
	Eugen Hristev <eugen.hristev@microchip.com>
Subject: Re: [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set
Date: Fri, 19 Jul 2019 08:52:52 +0100	[thread overview]
Message-ID: <m3zhla5uln.fsf@linaro.org> (raw)
In-Reply-To: <854769c0-c933-0919-2798-e8286e1694fb@xs4all.nl>

Hi Hans,
On Wed 17 Jul 2019 at 10:24, Hans Verkuil wrote:
> If CONFIG_VIDEO_V4L2_SUBDEV_API is not set, then it is still possible
> to call set_fmt for V4L2_SUBDEV_FORMAT_TRY, the result is just not
> stored. So return 0 instead of -ENOTTY.
>
> Calling get_fmt with V4L2_SUBDEV_FORMAT_TRY should return -EINVAL
> instead of -ENOTTY, after all the get_fmt functionality is still
> present, just not supported for TRY.
>
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> ---
> This was fixed for the ov7670 (https://patchwork.linuxtv.org/patch/57584/) when
> working on the via-camera driver, but the same pattern is found in other drivers,
> and those are fixed in this patch.
> ---
>  drivers/media/i2c/mt9m111.c | 2 +-
>  drivers/media/i2c/ov2640.c  | 2 +-
>  drivers/media/i2c/ov2659.c  | 4 +---
>  drivers/media/i2c/ov2680.c  | 5 +----
>  drivers/media/i2c/ov5695.c  | 5 +----
>  drivers/media/i2c/ov7740.c  | 8 ++------
>  6 files changed, 7 insertions(+), 19 deletions(-)
>

for the ov2680:
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>

---
Cheers,
	Rui


> diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> index d10fe3712036..d4864d155f0b 100644
> --- a/drivers/media/i2c/mt9m111.c
> +++ b/drivers/media/i2c/mt9m111.c
> @@ -536,7 +536,7 @@ static int mt9m111_get_fmt(struct v4l2_subdev *sd,
>  		format->format = *mf;
>  		return 0;
>  #else
> -		return -ENOTTY;
> +		return -EINVAL;
>  #endif
>  	}
>
> diff --git a/drivers/media/i2c/ov2640.c b/drivers/media/i2c/ov2640.c
> index 30e7e6b2b293..39474b287bb2 100644
> --- a/drivers/media/i2c/ov2640.c
> +++ b/drivers/media/i2c/ov2640.c
> @@ -932,7 +932,7 @@ static int ov2640_get_fmt(struct v4l2_subdev *sd,
>  		format->format = *mf;
>  		return 0;
>  #else
> -		return -ENOTTY;
> +		return -EINVAL;
>  #endif
>  	}
>
> diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
> index 5ed2413eac8a..a71277e361ff 100644
> --- a/drivers/media/i2c/ov2659.c
> +++ b/drivers/media/i2c/ov2659.c
> @@ -1055,7 +1055,7 @@ static int ov2659_get_fmt(struct v4l2_subdev *sd,
>  		mutex_unlock(&ov2659->lock);
>  		return 0;
>  #else
> -	return -ENOTTY;
> +		return -EINVAL;
>  #endif
>  	}
>
> @@ -1131,8 +1131,6 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
>  #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>  		mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
>  		*mf = fmt->format;
> -#else
> -		ret = -ENOTTY;
>  #endif
>  	} else {
>  		s64 val;
> diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
> index b10bcfabaeeb..164f983c1814 100644
> --- a/drivers/media/i2c/ov2680.c
> +++ b/drivers/media/i2c/ov2680.c
> @@ -675,7 +675,7 @@ static int ov2680_get_fmt(struct v4l2_subdev *sd,
>  #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>  		fmt = v4l2_subdev_get_try_format(&sensor->sd, cfg, format->pad);
>  #else
> -		ret = -ENOTTY;
> +		ret = -EINVAL;
>  #endif
>  	} else {
>  		fmt = &sensor->fmt;
> @@ -723,10 +723,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
>  #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>  		try_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
>  		format->format = *try_fmt;
> -#else
> -		ret = -ENOTTY;
>  #endif
> -
>  		goto unlock;
>  	}
>
> diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
> index e65a94353175..34b7046d9702 100644
> --- a/drivers/media/i2c/ov5695.c
> +++ b/drivers/media/i2c/ov5695.c
> @@ -823,9 +823,6 @@ static int ov5695_set_fmt(struct v4l2_subdev *sd,
>  	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
>  #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>  		*v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
> -#else
> -		mutex_unlock(&ov5695->mutex);
> -		return -ENOTTY;
>  #endif
>  	} else {
>  		ov5695->cur_mode = mode;
> @@ -856,7 +853,7 @@ static int ov5695_get_fmt(struct v4l2_subdev *sd,
>  		fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
>  #else
>  		mutex_unlock(&ov5695->mutex);
> -		return -ENOTTY;
> +		return -EINVAL;
>  #endif
>  	} else {
>  		fmt->format.width = mode->width;
> diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
> index 70bb870b1d08..a2f8f19bca7c 100644
> --- a/drivers/media/i2c/ov7740.c
> +++ b/drivers/media/i2c/ov7740.c
> @@ -827,13 +827,9 @@ static int ov7740_set_fmt(struct v4l2_subdev *sd,
>  #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>  		mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
>  		*mbus_fmt = format->format;
> -
> +#endif
>  		mutex_unlock(&ov7740->mutex);
>  		return 0;
> -#else
> -		ret = -ENOTTY;
> -		goto error;
> -#endif
>  	}
>
>  	ret = ov7740_try_fmt_internal(sd, &format->format, &ovfmt, &fsize);
> @@ -868,7 +864,7 @@ static int ov7740_get_fmt(struct v4l2_subdev *sd,
>  		format->format = *mbus_fmt;
>  		ret = 0;
>  #else
> -		ret = -ENOTTY;
> +		ret = -EINVAL;
>  #endif
>  	} else {
>  		format->format = ov7740->format;


      parent reply	other threads:[~2019-07-19  7:52 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-17  9:24 [PATCH] media/i2c: don't return ENOTTY if SUBDEV_API is not set Hans Verkuil
2019-07-19  7:24 ` Lad, Prabhakar
2019-07-19  7:52 ` Rui Miguel Silva [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m3zhla5uln.fsf@linaro.org \
    --to=rui.silva@linaro.org \
    --cc=akinobu.mita@gmail.com \
    --cc=eugen.hristev@microchip.com \
    --cc=hverkuil@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=prabhakar.csengg@gmail.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.