From: haojian.zhuang@marvell.com (Haojian Zhuang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] input: enable touch on 88pm860x
Date: Tue, 8 Dec 2009 13:34:16 -0500 [thread overview]
Message-ID: <mailman.86.1260364647.2170.linux-arm-kernel@lists.infradead.org> (raw)
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
drivers/input/touchscreen/88pm860x-ts.c | 242 +++++++++++++++++++++++++++++++
drivers/input/touchscreen/Kconfig | 12 ++
drivers/input/touchscreen/Makefile | 1 +
include/linux/mfd/88pm860x.h | 1 +
4 files changed, 256 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/touchscreen/88pm860x-ts.c
diff --git a/drivers/input/touchscreen/88pm860x-ts.c
b/drivers/input/touchscreen/88pm860x-ts.c
new file mode 100644
index 0000000..7944530
--- /dev/null
+++ b/drivers/input/touchscreen/88pm860x-ts.c
@@ -0,0 +1,242 @@
+/*
+ * Touchscreen driver for Marvell 88PM860x
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/mfd/88pm860x.h>
+
+#define MEAS_LEN (8)
+#define ACCURATE_BIT (12)
+
+/* touch register */
+#define MEAS_EN3 (0x52)
+
+#define MEAS_TSIX_1 (0x8D)
+#define MEAS_TSIX_2 (0x8E)
+#define MEAS_TSIY_1 (0x8F)
+#define MEAS_TSIY_2 (0x90)
+#define MEAS_TSIZ1_1 (0x91)
+#define MEAS_TSIZ1_2 (0x92)
+#define MEAS_TSIZ2_1 (0x93)
+#define MEAS_TSIZ2_2 (0x94)
+
+/* bit definitions of touch */
+#define MEAS_PD_EN (1 << 3)
+#define MEAS_TSIX_EN (1 << 4)
+#define MEAS_TSIY_EN (1 << 5)
+#define MEAS_TSIZ1_EN (1 << 6)
+#define MEAS_TSIZ2_EN (1 << 7)
+
+struct pm860x_touch {
+ struct input_dev *idev;
+ struct i2c_client *i2c;
+ struct pm860x_chip *chip;
+ int irq;
+ int res_x; /* resistor of Xplate */
+};
+
+static irqreturn_t pm860x_touch_handler(int irq, void *data)
+{
+ struct pm860x_touch *touch = data;
+ struct pm860x_chip *chip = touch->chip;
+ unsigned char buf[MEAS_LEN];
+ int x, y, pen_down;
+ int z1, z2, rt = 0;
+ int ret;
+
+ pm860x_mask_irq(chip, irq);
+ ret = pm860x_bulk_read(touch->i2c, MEAS_TSIX_1, MEAS_LEN, buf);
+ if (ret < 0)
+ goto out;
+
+ pen_down = buf[1] & (1 << 6);
+ x = ((buf[0] & 0xFF) << 4) | (buf[1] & 0x0F);
+ y = ((buf[2] & 0xFF) << 4) | (buf[3] & 0x0F);
+ z1 = ((buf[4] & 0xFF) << 4) | (buf[5] & 0x0F);
+ z2 = ((buf[6] & 0xFF) << 4) | (buf[7] & 0x0F);
+
+ if (pen_down) {
+ if ((x != 0) && (z1 != 0) && (touch->res_x != 0)) {
+ rt = z2 / z1 - 1;
+ rt = (rt * touch->res_x * x) >> ACCURATE_BIT;
+ dev_dbg(chip->dev, "z1:%d, z2:%d, rt:%d\n",
+ z1, z2, rt);
+ }
+ input_report_abs(touch->idev, ABS_X, x);
+ input_report_abs(touch->idev, ABS_Y, y);
+ input_report_abs(touch->idev, ABS_PRESSURE, rt);
+ input_report_key(touch->idev, BTN_TOUCH, 1);
+ } else {
+ input_report_abs(touch->idev, ABS_PRESSURE, 0);
+ input_report_key(touch->idev, BTN_TOUCH, 0);
+ }
+ input_sync(touch->idev);
+ pm860x_unmask_irq(chip, irq);
+
+ if (pen_down)
+ dev_dbg(chip->dev, "pen down at [%d, %d].\n", x, y);
+ else
+ dev_dbg(chip->dev, "pen release\n");
+out:
+ return IRQ_HANDLED;
+}
+
+static int pm860x_touch_open(struct input_dev *dev)
+{
+ struct pm860x_touch *touch = input_get_drvdata(dev);
+ struct pm860x_chip *chip = touch->chip;
+ int data, ret;
+
+ data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN
+ | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN;
+ ret = pm860x_set_bits(touch->i2c, MEAS_EN3, data, data);
+ if (ret < 0)
+ goto out;
+ pm860x_unmask_irq(chip, touch->irq);
+ return 0;
+out:
+ return ret;
+}
+
+static void pm860x_touch_close(struct input_dev *dev)
+{
+ struct pm860x_touch *touch = input_get_drvdata(dev);
+ struct pm860x_chip *chip = touch->chip;
+ int data;
+
+ data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN
+ | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN;
+ pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0);
+ pm860x_mask_irq(chip, touch->irq);
+}
+
+static int __devinit pm860x_touch_probe(struct platform_device *pdev)
+{
+ struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct pm860x_platform_data *pm860x_pdata;
+ struct pm860x_touch_pdata *pdata;
+ struct pm860x_touch *touch;
+ int irq, ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "No IRQ resource!\n");
+ return -EINVAL;
+ }
+
+ if (pdev->dev.parent->platform_data) {
+ pm860x_pdata = pdev->dev.parent->platform_data;
+ pdata = pm860x_pdata->touch;
+ } else
+ pdata = NULL;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "platform data isn't assigned to "
+ "touch\n");
+ return -EINVAL;
+ }
+
+ touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL);
+ if (touch == NULL)
+ return -ENOMEM;
+ dev_set_drvdata(&pdev->dev, touch);
+
+ touch->idev = input_allocate_device();
+ if (touch->idev == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate input device!\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ touch->idev->name = "88pm860x-touch";
+ touch->idev->phys = "88pm860x/input0";
+ touch->idev->id.bustype = BUS_I2C;
+ touch->idev->dev.parent = &pdev->dev;
+ touch->idev->open = pm860x_touch_open;
+ touch->idev->close = pm860x_touch_close;
+ touch->chip = chip;
+ touch->i2c = (chip->id == CHIP_PM8607) ? chip->client \
+ : chip->companion;
+ touch->irq = irq;
+ touch->res_x = pdata->res_x;
+ input_set_drvdata(touch->idev, touch);
+
+ ret = pm860x_request_irq(chip, irq, pm860x_touch_handler, touch);
+ if (ret < 0)
+ goto out_irq;
+
+ __set_bit(EV_ABS, touch->idev->evbit);
+ __set_bit(ABS_X, touch->idev->absbit);
+ __set_bit(ABS_Y, touch->idev->absbit);
+ __set_bit(ABS_PRESSURE, touch->idev->absbit);
+ __set_bit(EV_SYN, touch->idev->evbit);
+ __set_bit(EV_KEY, touch->idev->evbit);
+ __set_bit(BTN_TOUCH, touch->idev->keybit);
+
+ input_set_abs_params(touch->idev, ABS_X, 0, 1 << ACCURATE_BIT, 0, 0);
+ input_set_abs_params(touch->idev, ABS_Y, 0, 1 << ACCURATE_BIT, 0, 0);
+ input_set_abs_params(touch->idev, ABS_PRESSURE, 0, 1 << ACCURATE_BIT,
+ 0, 0);
+
+ ret = input_register_device(touch->idev);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to register touch!\n");
+ goto out_rg;
+ }
+
+ platform_set_drvdata(pdev, touch);
+ return 0;
+out_rg:
+ pm860x_free_irq(chip, irq);
+out_irq:
+ input_free_device(touch->idev);
+out:
+ kfree(touch);
+ return ret;
+}
+
+static int __devexit pm860x_touch_remove(struct platform_device *pdev)
+{
+ struct pm860x_touch *touch = platform_get_drvdata(pdev);
+
+ input_unregister_device(touch->idev);
+ pm860x_free_irq(touch->chip, touch->irq);
+ return 0;
+}
+
+static struct platform_driver pm860x_touch_driver = {
+ .driver = {
+ .name = "88pm860x-touch",
+ .owner = THIS_MODULE,
+ },
+ .probe = pm860x_touch_probe,
+ .remove = __devexit_p(pm860x_touch_remove),
+};
+
+static int __init pm860x_touch_init(void)
+{
+ return platform_driver_register(&pm860x_touch_driver);
+}
+module_init(pm860x_touch_init);
+
+static void __exit pm860x_touch_exit(void)
+{
+ platform_driver_unregister(&pm860x_touch_driver);
+}
+module_exit(pm860x_touch_exit);
+
+MODULE_DESCRIPTION("Touchscreen driver for Marvell Semiconductor 88PM860x");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:88pm860x-touch");
+
diff --git a/drivers/input/touchscreen/Kconfig
b/drivers/input/touchscreen/Kconfig
index 8cc453c..f4e6fd2 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -530,4 +530,16 @@ config TOUCHSCREEN_PCAP
To compile this driver as a module, choose M here: the
module will be called pcap_ts.
+
+config TOUCHSCREEN_88PM860X
+ tristate "Marvell 88PM860x touchscreen"
+ depends on MFD_88PM860X
+ help
+ Say Y here if you have a 88PM860x PMIC and want to enable
+ support for the built-in touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called 88pm860x-ts.
endif
diff --git a/drivers/input/touchscreen/Makefile
b/drivers/input/touchscreen/Makefile
index 15fa62c..b278a1f 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -6,6 +6,7 @@
wm97xx-ts-y := wm97xx-core.o
+obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o
obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o
obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o
obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
index 9bb8a10..1ecf7d3 100644
--- a/include/linux/mfd/88pm860x.h
+++ b/include/linux/mfd/88pm860x.h
@@ -341,6 +341,7 @@ struct pm860x_touch_pdata {
int tsi_prebias; /* time, slot */
int pen_prebias; /* time, slot */
int pen_prechg; /* time, slot */
+ int res_x; /* resistor of Xplate */
unsigned long flags;
};
--
1.5.6.5
next reply other threads:[~2009-12-08 18:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-08 18:34 Haojian Zhuang [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-11-12 17:15 [PATCH] input: enable touch on 88pm860x Haojian Zhuang
2009-11-12 17:15 Haojian Zhuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=mailman.86.1260364647.2170.linux-arm-kernel@lists.infradead.org \
--to=haojian.zhuang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.