From mboxrd@z Thu Jan 1 00:00:00 1970 From: bert hubert Date: Wed, 26 Sep 2001 14:10:42 +0000 Subject: Re: [LARTC] route with different metric Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Wed, Sep 26, 2001 at 03:53:23PM +0200, Juri Haberland wrote: > > > If that works as intended, please let us know! > > > > I just tried and it does some funny things - still investigating... > > Ok, seems to work, but it looks like you have to have the default routes > in the order of the interfaces, e.g.: > eth0: 10.0.1.2 (/24) > eth1: 10.0.2.2 (/24) > ip route add default nexthop via 10.0.1.1 dev eth0 nexthop via 10.0.2.1 > dev eth1 I think that that's very unlikely. The important thing is: is this 'sticky'? Is a single TCP session mated to a single route automatically? Or does MASQ do this for you? I've started writing a chapter on this subject. Regards, bert -- http://www.PowerDNS.com Versatile DNS Software & Services Trilab The Technology People Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/