From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabian Gervan Date: Sat, 29 Sep 2001 09:47:21 +0000 Subject: [LARTC] unshaping telnet Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello I have this setup, it work fine, but i can't telnet from any client to the linux server without trafic shaping: --cut-- tc qdisc add dev eth1 root handle 1: cbq bandwidth 10Mbit avpkt 1000 tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 weigh tc class add dev eth1 parent 1:1 classid 1:100 cbq bandwidth 100Mbit rate 64kbit allot 1514 weight 6Kbit prio 5 maxburst 12 avpkt 1000 bounded tc class add dev eth1 parent 1:100 classid 1:102 cbq bandwidth 100Mbit rate 32kbit allot 1514 weight 3Kbit prio 5 maxburst 6 avpkt 1000 borrow tc class add dev eth1 parent 1:100 classid 1:103 cbq bandwidth 100Mbit rate 32kbit allot 1514 weight 3Kbit prio 5 maxburst 6 avpkt 1000 borrow tc qdisc add dev eth1 parent 1:102 sfq quantum 1514b perturb 15 tc qdisc add dev eth1 parent 1:103 sfq quantum 1514b perturb 15 tc filter add dev eth1 parent 1:0 protocol ip prio 25 u32 match ip dst 10.0.0.2/32 flowid 1:102 tc filter add dev eth1 parent 1:0 protocol ip prio 25 u32 match ip dst 10.0.0.3/32 flowid 1:103 --cut-- server (10.0.0.1) 64kbit (bounded) 32kbit (borrow)- PC1 (10.0.0.2) 32kbit-(borrow)- PC2 (10.0.0.3) what I should add/change to make a telnet from pc1 or pc2 to server, without trafic shaping, or minimal shapping? Regards, Fabian. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/