From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Kirk Date: Mon, 01 Oct 2001 13:41:49 +0000 Subject: [LARTC] building linux router with QoS what about performance Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hey Listmembers Im currently looking into building a linuxrouter which has one purpose. To divide bandwidth to networks. The setup will look like this : Cisco 7120/oc3/100mbit--eth0--eth1,2,3,4 etc etc Im planning to use CBQ to divide bandwidth against the diffrent network. Right now im trying to figure out what the hardware requirments would be and how scaleable this solution will be? Have anyone on this list tried to doing something equal this setup or have experince with QoS on high bandwidth links? Thanks in advance -- Venlig hilsen/Kind regards Thomas Kirk ARKENA thomas@arkena.com Http://www.arkena.com "[In 'Doctor' mode], I spent a good ten minutes telling Emacs what I thought of it. (The response was, 'Perhaps you could try to be less abusive.')" (By Matt Welsh) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/