From mboxrd@z Thu Jan  1 00:00:00 1970
From: Patrick Nagelschmidt <dto@gmx.net>
Date: Fri, 07 Dec 2001 15:38:47 +0000
Subject: Re: [LARTC] CBQ only works 'bounded'
Message-Id: <marc-lartc-100773963813636@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-100768870231848@msgid-missing>
In-Reply-To: <marc-lartc-100768870231848@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

At 07.12.01, you wrote:
>Ok, I tried this with HTB

the next time i recompile my kernel i'll include it and see if it is more
effective in my scenario.

>You could probably also get away with assigning 220kbit/s to your
>interactive class and 1kbit/s to the bulk class, but allowing it to borrow
>up to 220kbit/s, which would save you from trimming off 10%.

i allready tried that (not with HTB of course), but this resulted in the bulk
class borrowing so much from the interactive class that it rendered the
interactive class non interactive :)

regards,

Patrick


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/