From mboxrd@z Thu Jan 1 00:00:00 1970 From: Amit Kucheria Date: Mon, 10 Dec 2001 00:27:43 +0000 Subject: [LARTC] HTB burst, cburst parameters Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, I am trying to understand the burst and cburst parameters in HTB. Can somebody explain it. The docs arent very clear. I am trying to throttle a 10Mbit link to a T1 link using HTB. I am using the following: ------------------------------------------ DEVICE="dev eth1" BANDWIDTH="bandwidth 10Mbit" LIMITBW="1.536Mbit" AVPKT="avpkt 1470" # Root HTB qdisc 1: $TC qdisc add $DEVICE root handle 1: htb # This HTB class rate limits everyting to 1Mbit $TC class add $DEVICE parent 1: classid 1:1 htb rate 1.536Mbps ceil 1.536Mbps burst 1k cburst 0.5k ------------------------------------------ Is this right ? Also, can HTB take other qdiscs and classes ? Regards, Amit -- The statement below is true. The statement above is false. ^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^ Amit Kucheria EECS Grad. Research Assistant University of Kansas @ Lawrence (R)+1-(785)-830 8521 ||| (O)+1-(785)-864 7774 ____________________________________________________ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/