From mboxrd@z Thu Jan  1 00:00:00 1970
From: Martin Devera <devik@cdi.cz>
Date: Mon, 10 Dec 2001 12:52:11 +0000
Subject: Re: [LARTC] Re: further CBQ/tc documentation ds9a.nl/lartc/manpages
Message-Id: <marc-lartc-100798880826031@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-100785524509147@msgid-missing>
In-Reply-To: <marc-lartc-100785524509147@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

> This is most obviously true when looking at a station, but also true to some 
> extent in routers. To get the minds working on the router case consider the 
> following router:
> 
>  ppp0	256 Kpbs link to ISP
>  eth0	100 Mbps lan 1
>  eth1	100 Mbps lan 2
>  eth3	100 Mbps lan 3
> 
> And you want without needing to involve your ISP reasonably shape incoming 
> traffic received on ppp0 to not use more than 64kbps for rsync in total.
> 
> Doing such a setup using ingress shaping is "trivial". Doing it using egress 
> shaping on each of the ethernet interfaces is not.

for this special case I designed IMQ :)


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/