From mboxrd@z Thu Jan 1 00:00:00 1970 From: bert hubert Date: Tue, 11 Dec 2001 15:05:34 +0000 Subject: Re: [LARTC] peak Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Tue, Dec 11, 2001 at 11:07:05AM -0300, pepe wrote: > I have an implemented traffic control with tc+cbq..,classes for every ip,etc... it woks very good; But now i wanna know how can i assign the peaks of traficc to any class ? . My clients (internet clients) work very fine with the assigned bandwidth, but now i wanna implement peaks of max bandwidth for all. How can i make this ? > > I have a 2Mbps internet connection , and my clients have a wireless > connection (of 2Mbps) to me, but i assigned only 256kbps per client. I > wanna assign to my clients 256kbps with peaks of 2Mbps, How can i make > that. You probably have TBF sitting inside your CBQ. Remove it and it should work. Otherwise, please show your entire CBQ configuration. Generally there is NO NEED for a TBF within a CBQ! Regards, bert -- http://www.PowerDNS.com Versatile DNS Software & Services Trilab The Technology People Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/