[LARTC] arp-proxy and advanced routing problem

[Arne Hueggenberg <zalaster@nef.wh.uni-dortmund.de>]

Hi,

i have a problem with my setup.
The box has 3 interfaces
to the cable modem,
to the dsl modem
to the switch serving our other boxes

all boxes on the switch have static ips
behind the cable modem is a subnet with hosts with static ips on the sae 
subnet
in behind the cable modem is also the default 

the arp-proxying is done between the cable interface and the switch interface

the third goes to the adsl modem
we do masqing on this interface

now, some of the boxes on the switch are supposed to go out over the adsl 
line, and some are supposed to go via the gateway behind the cable modem.
default route via the adsl, and a seperate table for those supposed to go via 
the cable.

Now, when we add that table everything works as its supposed to.
But if a windows box reboots it suddenly complains the switch interface had 
its ip and doesent configure the interface
if we remove the table it boots fine

Anyone have an idea what might be the problem?

-- 
Arne 'zal' Hueggenberg <zalaster@nef.wh.uni-dortmund.de>


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/