RE: [LARTC] I seem to have a problem with HTB

["Patrik" <ph@kurd.nu>]

[-- Attachment #1: Type: text/plain, Size: 903 bytes --]

> > Try a newer HTB patch, it fixes this problem.

I haven't found any newer.. 

> 
> what is newer? I'm currently experiencing the same problem on a SMP
box,
> kernel 2.4.13 patched with the 39085 bytes htb_2.4.14.diff, HZ set to
> 1024.
> 
> tc qdisc add dev eth0 root handle 1: htb default 3
> 
> tc class add dev eth0 parent 1: classid 1:1 htb rate 10Mbit burst 10kB
> tc qdisc add dev eth0 parent 1:1 sfq perturb 10
> tc class add dev eth0 parent 1: classid 1:3 htb rate 90Mbit burst 90kB
> 
> Whenever the overlimit for 1:1 kicks in, "HTB delay > 5sec" messages
> appear and traffic stalls immediately. Any ideas?

I used to have this problem too. I found out that the parent burst was
set lower than its children burst. When I increased the parent burst, I
didn't receive more of these messages...

I'm not 100% sure if I've done the right decision, but it solved the
problem.

Sincerely Patrik


[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3250 bytes --]