From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ryan" Date: Wed, 19 Dec 2001 21:33:37 +0000 Subject: RE: [LARTC] VLAN patch Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I understand the use of VLANs on a switch, but is it only useful in Linux when your Linux computer is configured as a bridge? Where do you get the vconfig tool? Ryan ryan@vbnet.net > >> I've just downloaded and started reading through the VLAN patch from >> http://sourceforge.net/projects/vlan/ and it seem simple enough to get >> working. I was wondering if anyone else here is running it. > > it works fine, and it's integrated in "standard" kernels since 2.4.15 I > think. Note that you need a little binary tool to create and delete > vlans (vconfig), and that you may have problems with MTU with some NICs > (check the VLAN page for more information about this MTU problem). > > Jerome Petazzoni > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: > http://ds9a.nl/lartc/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/