From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jerome Petazzoni <skaya@enix.org>
Date: Fri, 21 Dec 2001 22:19:23 +0000
Subject: RE: [LARTC] Re: Can't use two uplinks on a linux box
Message-Id: <marc-lartc-100897323732578@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-100891533520727@msgid-missing>
In-Reply-To: <marc-lartc-100891533520727@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org


> Here is my network.
> 
> 
>  +-------+                      +---------+
>  |  ISP  |                      |   ISP   |
>  +-------+                      +---------+
> 10.10.10.254                      20.20.20.254
>        \                                   /
>          \                               /
>  ppp0: 10.10.10.1           ppp1: 20.20.20.1
>                  +------------+
>                  |   Linux    |
>                  +------------+
>                 eth2: 172.31.0.1/16

> Why I can't set up equal cost multipath default route?

you can't without special arrangements with the ISPs.

IMHO, if you want to do some kind of load balancing, 
you should do some SNAT balancing. 

Jerome Petazzoni <skaya at enix dot org>
--
'They come back to the mountains to die,' said the King.
'They live in Ankh-Morpork.'
(The Fifth Elephant)


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/