From mboxrd@z Thu Jan 1 00:00:00 1970 From: "vanitha" Date: Fri, 21 Dec 2001 17:25:36 +0000 Subject: Re: [LARTC] Monitoring CBQ Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello Dan Just have a look on Advanced Routing-2.4 Howto I think you will have some ideas Vanitha ----- Original Message ----- From: "Daniel Wittenberg" To: "vanitha" Sent: Friday, December 21, 2001 9:02 AM Subject: Re: [LARTC] Monitoring CBQ > I've got a favor to ask, would it be possible to get a sanitized copy of > the script you use to setup the bandwidth shaping? I've been poking > around on this list, and the how-to, and just not quite understanding > how some of the pieces fit together. I've been trying to find a good > real-world example, but haven't found a "complete" example, just > bits-n-pieces. > > I'd be forever in your debt... > > Dan > > On Fri, 2001-12-21 at 08:24, vanitha wrote: > > Hello > > > > > > Iam a small isp using CBQ to control the Bandwidth.It is working fine. > > The problem iam facing is that i couldn't monitor the bandwidth flow for each machine > > is there any tool for it. > > > > > > Advance Thanks > > Vanitha > > > _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/