Hello everyone, I have a problem regarding gre
tunneling, I have two linux box both of them has a private network and the
linux A is connected to the internet via wireless radio and the other linux B is
connected to the internet via lease line. Here is the setup of my two linux
box
Linux A
eth0 = 203.189.x.1 (internet)
eth1 = 192.168.1.1 (going to hub private
network)
Linux B
eth0 = 205.198.x.1 (internet)
eth1 = 192.168.2.1 (going to hub private
network)
here is my configuration in Linux A and B. I also
load the modules needed (insmod ip_gre)
Linux A
ip tunnel add netb mode gre remote 205.198.x.1
local 203.189.x.1 ttl 255
ip link set netb up
ip addr add 192.168.1.1 dev netb
ip route add 192.168.2.0/24 dev netb
Linux B
ip tunnel add neta mode gre remote 203.189.x.1
local 205.198.x.1 ttl 255
ip link set neta up
ip addr add 192.168.2.1 dev neta
ip route add 192.168.1.0/24 dev neta
I could ping both sides the eth0 and also the eth1
with is for the private network, here is my problem i couldnt ping the other
private ip addresses which my eth1 is connected to the hub, anyone can help me,
whats my error. pls reply asap. thanks
Glynn Condez