From mboxrd@z Thu Jan 1 00:00:00 1970 From: mok2 Date: Mon, 07 Jan 2002 17:23:12 +0000 Subject: Re: [LARTC] Flush Dead-Links Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org no that doesnt do it.. I cant give any examples.. right now because i have to go out to the site but in a nutshell.. ip route add default table 223 proto static nexthop via $gweth0 dev eth0 weight 1 nexthop via $pppgw dev ppp0 weight 11 but the $pppgw is always the same but when the modem hangs up an redials.. the route tables shows the $pppgw link as down.. and i cant use it unless i reboot.. if i re run this command it doesnt work .. will still u that link down.. so i need to flush it On Mon, 7 Jan 2002, bert hubert wrote: > On Mon, Jan 07, 2002 at 12:13:56PM -0500, mok2 wrote: > > > > How do u flush deadlinks ? > > # ip route flush cache > > May do what you want - I'm not sure what you mean. > > Regards, > > bert > > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/