From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Devera Date: Mon, 14 Jan 2002 09:35:39 +0000 Subject: Re: [LARTC] SFQ improvement ideas Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > > To change, can't you just do: > > tc del dev eth0 root handle 1: > > > > (or whatever your handles are, you get the idea) > > > > Shouldn't that essentially "flush" all the shaping under then 1: handle? > > This is not a valid command. > > The other way is to stop and start networking. Really, I'd just rather > reboot and be done with it. The command is not exactly as it should be but when you write it correcly it works. I don't reboot my routers because it'd disrupt a traffic. Rather I use tc change or tc del and it works perfectly here. If not, report it as bug. devik _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/