From mboxrd@z Thu Jan  1 00:00:00 1970
From: Martin Devera <devik@cdi.cz>
Date: Wed, 16 Jan 2002 22:17:48 +0000
Subject: Re: [LARTC] taking a look at your cbq configuration?
Message-Id: <marc-lartc-101121955415527@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-101121921214503@msgid-missing>
In-Reply-To: <marc-lartc-101121921214503@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

> tc -s qdisc ls dev eth0
> 
> I get the following output:
> 
> qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
>   Sent 49318327 bytes 35920 pkts (dropped 0, overlimits 48978)
>    borrowed 0 overactions 0 avgidle 624 undertime 0
> 
> That's not I want: I'd like to see the different classes etc...
> 
> What am I doing wrong?

if you want classes what don't to try tc -s class show dev eth0 ?

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/