From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick McHardy Date: Wed, 23 Jan 2002 14:24:43 +0000 Subject: Re: [LARTC] unknown qdisc 'htb' ??? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi. You are probably using an old version of tc, try downloading the precompiled binary from the htb site or get the sources at http://diffserv.sourceforge.net/ Patrick Patrick Van Acker schrieb: > > Hello, > > I'd like to try out HTB for traffic shaping. > > I have a test machine with Redhat 7.2 (kernel 2.4.10), I've downloaded > kernel 2.4.17, applied the patch from http://luxik.cdi.cz/~devik/qos/htb/, > recompiled the kernel (checked the option to use HTB in make menuconfig), > and rebooted with the new kernel. > > When I try to add some rules with HTB (f.i. tc qdisc add dev eth0 root > handle 1: htb default 1:1 ), I got the following error message: > Unknown qdisc "htb", hence option "default" is unparsable > > Obviously, this is not what I want :-) > > What is going wrong here? > > Regards, > Patrick > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/ -- Computers are like air conditioners. They stop working when you open Windows. -- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/