From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Mon, 28 Jan 2002 18:45:43 +0000 Subject: Re: [LARTC] commands to see Entire Configuration Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Monday 28 January 2002 19:34, rajesh revuru wrote: > hi..all, > is there any method to measure the bandwidth allocation after setting the > configuration with commands, thanks, I have a perl script that reads the iptables byte counters (but you can adapt it to use the output of tc) and calculates the bandwith. Can be found on www.docum.org and the script is called monitor.pl Stef -- stef.coene@docum.org More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/