From mboxrd@z Thu Jan  1 00:00:00 1970
From: Whit Blauvelt <whit@transpect.com>
Date: Fri, 08 Feb 2002 00:17:20 +0000
Subject: Re: [LARTC] Load Balance RX/TX data on the same NICs.
Message-Id: <marc-lartc-101312748006985@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-101312131723254@msgid-missing>
In-Reply-To: <marc-lartc-101312131723254@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

You might look at http://www.linuxvirtualserver.org/~julian/nano.txt - if
your not using the patches referred to there it's still a good outline of a
solution that should generalize to your setup. Just leave out "proto static"
in the lines where it occurs and set 3 rather than 2 special tables. I have
no trouble with either SSH or having FTP return over the interface it comes
in on with that setup.

Whit
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/