From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Richardson, Robert" Date: Fri, 08 Feb 2002 00:56:26 +0000 Subject: RE: [LARTC] Load Balance RX/TX data on the same NICs. MIME-Version: 1 Content-Type: multipart/mixed; boundary="----_=_NextPart_001_01C1B03B.6FD566A0" Message-Id: List-Id: References: In-Reply-To: To: lartc@vger.kernel.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C1B03B.6FD566A0 Content-Type: text/plain This page looks promising. I appreciate your suggestion. Thanks, Robert. -----Original Message----- From: Whit Blauvelt [mailto:whit@transpect.com] Sent: Thursday, February 07, 2002 4:17 PM To: Richardson, Robert Cc: 'lartc@mailman.ds9a.nl' Subject: Re: [LARTC] Load Balance RX/TX data on the same NICs. You might look at http://www.linuxvirtualserver.org/~julian/nano.txt - if your not using the patches referred to there it's still a good outline of a solution that should generalize to your setup. Just leave out "proto static" in the lines where it occurs and set 3 rather than 2 special tables. I have no trouble with either SSH or having FTP return over the interface it comes in on with that setup. Whit ------_=_NextPart_001_01C1B03B.6FD566A0 Content-Type: text/html Content-Transfer-Encoding: quoted-printable RE: [LARTC] Load Balance RX/TX data on the same NICs.

This page looks promising.
I appreciate your suggestion.

Thanks,
Robert.

-----Original Message-----
From: Whit Blauvelt [mailto:whit@transpect.com]=
Sent: Thursday, February 07, 2002 4:17 PM
To: Richardson, Robert
Cc: 'lartc@mailman.ds9a.nl'
Subject: Re: [LARTC] Load Balance RX/TX data on the = same NICs.


You might look at http://www.linuxvirtualserver.org/~julian/nano.txt= - if
your not using the patches referred to there it's = still a good outline of a
solution that should generalize to your setup. Just = leave out "proto static"
in the lines where it occurs and set 3 rather than 2 = special tables. I have
no trouble with either SSH or having FTP return over = the interface it comes
in on with that setup.

Whit

------_=_NextPart_001_01C1B03B.6FD566A0-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/