From mboxrd@z Thu Jan 1 00:00:00 1970 From: bert hubert Date: Fri, 15 Feb 2002 16:16:33 +0000 Subject: Re: [LARTC] Route works, but ping time is 1000 ms Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thu, Feb 14, 2002 at 04:06:19PM -0500, Philip Mak wrote: > I have a server that has two ethernet cards, eth0 (64.94.46.199) and > eth1 (66.28.98.52). Can you show what happens? So something like this: # ping some.ip.address.0 ms/ms/ms/ms # echo "200 pnap" >> /etc/iproute2/rt_tables # ip rule add from 64.94.46.199 lookup pnap # ip route add default via 64.94.47.253 dev eth0 table pnap # ping some.ip.address.0 ms/ms/ms/ms Preferably with tcpdumps illustrating where packets go out. Regards, bert -- http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/